Every ExactYard calculator follows the same three steps, and we show the math so you can check it yourself.
Last reviewed: October 2026
The three steps
- Measure the space. Length × width gives area; adding depth gives volume.
- Convert to what you buy. Volume becomes cubic yards, tons, bags or piece counts.
- Add a waste allowance. Extra for cuts, spills and uneven ground.
Formulas by calculator
Gravel, topsoil and mulch (loose material)
Cubic yards = length (ft) × width (ft) × depth (in) ÷ 12 ÷ 27
Tons = cubic yards × density. We use about 1.4 tons per cubic yard for gravel; the exact figure varies by stone type and moisture.
Example: 24 ft × 12 ft × 3 in = 2.67 yd³, or about 3.7 tons.
Open the gravel calculatorMulch bags
Bags = cubic feet needed ÷ cubic feet per bag
A 2 ft³ bag means 13.5 bags per cubic yard; a 3 ft³ bag means 9 bags per cubic yard.
Open the mulch calculatorPavers
Pavers = project area ÷ area of one paver, plus waste
We add 5–10% for cuts, more for diagonal or curved layouts.
Open the paver calculatorFence posts
Posts = fence length ÷ post spacing + 1
Add extra posts for corners and gates.
Open the fence calculatorConcrete
Cubic yards = length (ft) × width (ft) × thickness (in) ÷ 12 ÷ 27
Bag counts depend on bag yield, which is printed on each bag.
Open the concrete calculatorDefault assumptions
| Item | Value we use | Why it varies |
|---|---|---|
| Gravel density | about 1.4 tons per yd³ | Stone type, size, moisture |
| Waste allowance | You choose (typical 5–10%) | Cuts, spills, uneven ground |
| Cubic yard | 27 cubic feet | Fixed |
Why these are estimates
Gravel and soil compact after installation, moisture changes weight, and ground is rarely perfectly level. Treat the result as a planning number and confirm quantities with your supplier before ordering.
Sources and corrections
Our conversions use standard unit definitions and supplier coverage charts.
Found a mistake? Tell us and we’ll review it.