Last reviewed: November 2, 2026. Formulas checked against standard industry conversions. How we calculate.
Use this free rock calculator (also a stone calculator and landscape rock calculator for tons) to estimate how many cubic yards, cubic feet, and tons of rock you need. Enter your area, choose a depth and material, and get an instant estimate in US short tons and metric tonnes.
Whether you are covering a garden bed, building a decorative rock landscape, or ordering gravel for a path, an accurate estimate helps you plan delivery and avoid ordering too much or too little.
Rock Material Calculator
Enter the size of the area you want to cover. You can type a length and width, or enter a total area if you already know the square footage.
Your Rock Estimate
Estimates are based on the dimensions and weight assumption entered. Confirm final quantities and material weight with your supplier.
How Does a Rock Calculator Work?
A rock calculator uses the dimensions of an area and the planned depth to estimate how much material you need. It then estimates weight if a bulk-weight value (tons per cubic yard) is available.
For a rectangular area, multiply length by width by depth. With dimensions in feet, divide the resulting cubic feet by 27 to get cubic yards. This is the basic method for figuring gravel or any other bulk landscape material by hand.
Volume in cubic feet: Length (ft) × Width (ft) × Depth (ft)
Volume in cubic yards: Cubic feet ÷ 27
Estimated rock weight: Cubic yards × Bulk weight (US tons per cubic yard)
The weight result is only as accurate as the bulk-weight assumption. Rock type, particle size, moisture and grading all change the weight per cubic yard.
How to Use the Rock Tonnage Calculator
- Measure the area. Enter length and width, or the total area, and choose the correct unit.
- Enter the rock depth. Use the intended finished layer thickness in inches.
- Choose your material. Pick a material, or use the custom option if your supplier gives a weight per cubic yard.
- Calculate. Review cubic yards, cubic feet, coverage, and weight in US tons, metric tonnes and pounds.
- Confirm your order. Ask the supplier about product-specific density, delivery units and any installation allowance.
How Much Does a Yard of Rock Weigh?
A cubic yard of rock does not have one fixed weight. It depends on the rock type, particle-size distribution, void spaces and moisture. As a general guide, many gravel and crushed stone products weigh roughly 1.2 to 1.5 US short tons (about 2,400 to 3,000 pounds) per cubic yard.
Weight of a cubic yard of common landscape materials
The table lists typical ranges for planning only. Use your supplier’s figure when you have it.
| Material | Typical weight per cubic yard | Approx. US tons |
|---|---|---|
| Gravel or crushed stone | 2,400–3,000 lb | 1.2–1.5 |
| Pea gravel | 2,500–3,000 lb | 1.25–1.5 |
| River rock / landscape rock | 2,500–3,000 lb | 1.25–1.5 |
| Decomposed granite | 2,700–3,100 lb | 1.35–1.55 |
| Sand | 2,200–2,900 lb (heavier when wet) | 1.1–1.45 |
| Topsoil or dirt | 2,000–2,700 lb (varies with moisture) | 1.0–1.35 |
| Mulch | 500–1,000 lb | 0.25–0.5 |
How much does 5 yards of gravel weigh?
If your supplier estimates 1.35 US short tons per cubic yard, then 5 cubic yards × 1.35 = 6.75 US short tons. Across the typical 1.2 to 1.5 range, 5 cubic yards of gravel would weigh about 6 to 7.5 tons. Confirm the product’s weight before arranging transport.
How much does a yard of pea gravel weigh?
Pea gravel commonly weighs around 1.25 to 1.5 US short tons per cubic yard, depending on stone size and moisture. Ask your supplier for the specific figure for the product you are buying.
Cubic Yards to Tons Conversion
To convert cubic yards to tons, multiply the volume by the material’s weight per cubic yard. To convert tons to cubic yards, divide the weight by that same figure.
Tons = Cubic yards × Tons per cubic yard
Cubic yards = Tons ÷ Tons per cubic yard
How many cubic yards are in one ton?
At an assumed 1.35 US short tons per cubic yard, one ton is about 0.74 cubic yards (1 ÷ 1.35). If the material is lighter or heavier, the answer changes.
| Cubic yards | US short tons (at 1.35 tons/yd³) | US short tons | Cubic yards (at 1.35 tons/yd³) |
|---|---|---|---|
| 1 | 1.35 | 1 | 0.74 |
| 2 | 2.70 | 2 | 1.48 |
| 5 | 6.75 | 5 | 3.70 |
| 10 | 13.50 | 10 | 7.41 |
| 20 | 27.00 | 20 | 14.81 |
Yard to tonne conversion (metric)
A US short ton is 2,000 pounds, while a metric tonne is 1,000 kilograms (about 2,205 pounds). To convert US short tons to metric tonnes, multiply by 0.907. At 1.35 US short tons per cubic yard, one cubic yard weighs about 1.22 metric tonnes. To convert cubic yards to tonnes, multiply the volume by the material’s weight in tonnes per cubic yard. Do not mix up the two units when comparing supplier quotes.
How do I convert square yards to tons?
You cannot convert square yards to tons without a depth, because tons measure weight and square yards measure only area. Multiply the area in square yards by the depth in yards to get cubic yards, then multiply by tons per cubic yard. For example, 100 square yards at 2 inches deep (2 ÷ 36 yard) is about 5.56 cubic yards, or roughly 7.5 US short tons at 1.35 tons per cubic yard.
Rock Coverage: How Much Does a Yard of Rock Cover?
One cubic yard contains 27 cubic feet. Divide 27 by the depth in feet to find how many square feet one cubic yard covers on level ground. This works for gravel, stone, mulch, sand and soil, so it also answers how much a yard of stone or mulch covers.
| Depth | Square feet covered by 1 cubic yard | Square feet covered by 1 US ton (at 1.35 tons/yd³) |
|---|---|---|
| 1 inch | 324 | 240 |
| 2 inches | 162 | 120 |
| 3 inches | 108 | 80 |
| 4 inches | 81 | 60 |
| 6 inches | 54 | 40 |
How many square feet does 1 ton of gravel cover?
Coverage depends on the gravel’s weight per cubic yard and the layer depth. Assume 1.35 US short tons per cubic yard and a 2-inch layer (1/6 foot). One ton is about 0.74 cubic yards, or about 20 cubic feet. Dividing 20 cubic feet by 1/6 foot gives roughly 120 square feet. At a 3-inch depth, the same ton covers about 80 square feet.
The coverage formula is: (Weight in US tons ÷ tons per cubic yard) × 27 ÷ depth in feet. It is a geometric estimate and does not account for uneven ground or material lost during installation.
Rock Calculator for Landscaping Projects
Landscape rock is used for decorative beds, pathways, borders, dry creek beds and areas around trees and shrubs. Each application may need a different stone size, depth and installation method.
Decorative landscape rock
Decorative rock is chosen for appearance, color and texture. Measure the bed’s length and width, then use a depth suited to the stone size and design. Prepare the ground and consider weed-control and edging.
Rock for pathways
Rounded decorative stones can move underfoot, while angular or compactable aggregates may give a firmer surface when installed correctly.
Rock for drainage
Drainage applications need aggregate selected for the design, particle-size specification and soil. Do not assume every decorative rock suits a French drain or foundation drainage system.
Rock base calculator: rock for a base layer
Use this tool as a rock base calculator for an initial volume estimate. A rock base for a driveway, patio or other construction project must be chosen for load, soil strength, compaction and drainage, and clean decorative rock is not necessarily a substitute for specified base aggregate. For paving projects, the Paver Base Calculator is a better fit.
Rock Calculator vs. Gravel Calculator vs. Stone Calculator
These tools use the same volume calculation. The difference is usually the material selected and the weight assumption used.
| Tool | Typical purpose |
|---|---|
| Rock calculator | Estimate landscape rock volume, tonnage and coverage. |
| Gravel calculator | Estimate gravel quantities for driveways, paths and other projects. |
| Stone calculator | Estimate stone quantities using dimensions and material assumptions. |
| Rock tonnage calculator | Convert estimated rock volume into weight using bulk density. |
For a driveway or general gravel project, use the ExactYard Gravel Calculator. For a paver installation, the Paver Base Calculator can help estimate the base material. Not sure which material to buy? Read our guide to the types of gravel.
Tips for Ordering Landscape Rock
- Measure the area carefully and decide the intended depth.
- Confirm whether the supplier sells rock by cubic yard, US short ton, metric tonne or truckload.
- Ask for the actual bulk weight per cubic yard if you need a reliable volume-to-weight conversion.
- Confirm particle size, rock type, color and grading before ordering.
- Ask whether the quote includes delivery and whether the truck can reach the unloading spot.
- Check the supplier’s advice on extra material for your installation.
Frequently Asked Questions About Rock Calculators
How do I calculate how much rock I need?
Multiply the area’s length by its width and depth to find the volume. Convert cubic feet to cubic yards by dividing by 27. Use the material’s bulk weight per cubic yard to estimate tonnage.
How much does a yard of rock weigh?
It varies with rock type, particle size, moisture and grading. Many gravel and crushed stone products weigh roughly 1.2 to 1.5 US short tons per cubic yard. Use the supplier’s specification for the most reliable figure.
How many cubic yards are in one ton?
Divide one US short ton by the material’s weight in tons per cubic yard. At 1.35 tons per cubic yard, one ton is about 0.74 cubic yards.
How do I convert cubic yards to tons?
Multiply the cubic yards by the material’s weight in US short tons per cubic yard. For example, 10 cubic yards at 1.35 tons per cubic yard is 13.5 tons.
How much does a yard of gravel cover?
One cubic yard covers about 324 square feet at 1 inch deep, 162 square feet at 2 inches, 108 square feet at 3 inches, and 81 square feet at 4 inches, assuming a level surface.
How many square feet does 1 ton of gravel cover?
At 1.35 tons per cubic yard, one ton covers about 120 square feet at a 2-inch depth and about 80 square feet at 3 inches. Coverage changes with the gravel’s weight and the layer depth.
How much does 5 yards of gravel weigh?
At 1.35 US short tons per cubic yard, 5 cubic yards weigh about 6.75 tons. Across the typical 1.2 to 1.5 range, expect roughly 6 to 7.5 tons.
How much does a cubic yard of dirt, sand or mulch weigh?
Typical planning ranges are about 2,000 to 2,700 pounds for topsoil or dirt, 2,200 to 2,900 pounds for sand, and 500 to 1,000 pounds for mulch. Moisture changes all of these, so confirm with your supplier.
Can I use this rock calculator for mulch, dirt or sand?
Yes. The volume calculation works for most bulk materials, and the material menu applies a typical weight for each. Use the supplier’s specification when you need an accurate tonnage.
Should I order extra rock?
An additional allowance may be needed for uneven ground, compaction, or material loss. The right amount depends on the project and product, so confirm it with your supplier or installer.
Calculate Your Rock Quantity with ExactYard
Getting the right amount of landscape rock starts with accurate measurements and a realistic weight estimate. Use this rock calculator to work out the volume, review the estimated tonnage, and plan your order before arranging delivery.
For more outdoor project estimates, explore the ExactYard Calculators directory.
Landscape Rock Calculator: How Much Rock Do You Need?
Use this landscape rock calculator to work out how much rock your beds, borders, or paths need. Enter the length and width, the finished depth, and the material, and it returns cubic yards, cubic feet, and weight in US short tons and metric tonnes.
As a quick planning rule, one ton of landscape rock covers roughly 80-100 sq ft at 2 inches deep. That is a conservative allowance for uneven ground, settling, and the gaps between larger stones. The geometric figure from this calculator’s own density for river rock or landscape rock (about 1.4 tons per cubic yard) is about 116 sq ft per ton at 2 inches deep, and the coverage table on this page shows 120 sq ft per ton at 2 inches for gravel at 1.35 tons per cubic yard. For an exact order, use the calculator with your supplier’s density.
How much does a ton of landscape rock cover?
Roughly 80-100 sq ft at 2 inches deep as a practical planning allowance, and about 116 sq ft by the geometric calculation at this calculator’s river rock and landscape rock density of about 1.4 tons per cubic yard. Deeper layers cover less: at 3 inches the geometric figure drops to about 77 sq ft per ton, and at 4 inches to about 58 sq ft per ton. Use the calculator above with your supplier’s density for the figure to order against.
Related: River Rock Calculator — Working with rounded river rock specifically? Use the River Rock Calculator for sizes, depth rules and coverage per ton.
How Much Does a Stone Weigh?
Stone can mean two different things, so check which one you need. As a UK weight unit, 1 stone = 14 lb, so 10 stone = 140 lb. As landscape stone by volume, solid rock weighs about 160 lb per cubic foot, so a 1 cu ft stone weighs about 160 lb. Actual weight varies by stone type and supplier, so check supplier specs before ordering.
Related calculators: for crushed material specifically, try the crushed stone calculator.
Related calculators and guides
Wondering about weight? See how many cubic yards are in a ton of rock.