Start calculating

Last reviewed: November 14, 2026. Formulas checked against standard industry conversions. How we calculate.

Quick answer: Multiply length x width x depth in feet to get cubic feet, then divide by 27 to get cubic yards. For a 24 ft x 12 ft area at 3 in deep, that is 2.67 cubic yards, or 2.93 cubic yards with a 10% waste allowance – about 4.1 tons at 1.40 tons per cubic yard. Use the calculator below for your exact size and gravel type.

Home  ›  Calculators  ›  Gravel Calculator
Material Calculator

Gravel Calculator: How Much Gravel Do You Need?

Enter your length, width and depth to estimate gravel in cubic yards, tons and pounds, plus optional cost. Add a waste allowance for a practical order quantity.

Last updated October 2026 · Reviewed by the ExactYard team

Built for real project planning

Use your own supplier density and price when you have them. Gravel weight varies by material, grading, moisture, and supplier.

Gravel Calculator
Live Calculation

1. Choose your measurement system

2. Choose the project shape

3. Enter your measurements

Quick depths:

4. Material & order settings

How the calculator works

How Much Gravel Do You Need?

ExactYard calculates your area, converts the volume, adds your waste allowance, and estimates weight from the selected density.

Step 1: Calculate the area

Rectangle: length × width. Circle: π × radius². Triangle: base × height ÷ 2.

Step 2: Multiply by depth

Depth is converted to the same units as the area. The result is the base volume before waste.

Step 3: Add waste allowance

Your percentage is applied to the base volume to get the quantity to order. Base layers settle when compacted, so consider 10 to 15%.

Step 4: Estimate weight and cost

Order volume × density gives tons. Cost appears only when you enter a price per ton.

Formulas used

Rectangle area = length × width Circle area = π × (diameter ÷ 2)² Triangle area = (base × height) ÷ 2 Volume = area × depth Order volume = volume × (1 + waste ÷ 100) Weight = order volume × density Cost = weight × price per ton

How deep should gravel be?

Decorative beds and paths: about 2 to 3 in.

Driveways: commonly 4 to 6 in of surface gravel over a compacted base.

Paver patios and walkways: commonly 4 to 6 in of compacted base.

Heavy vehicles, poor soil or freeze-thaw climates usually need more, so check local guidance.

Worked examples

Patio or path: 24 ft × 12 ft at 3 in

Area = 24 × 12 = 288 ft². Depth = 3 in = 0.25 ft. Volume = 288 × 0.25 = 72 ft³ = 2.67 yd³. Add 10% waste = 2.93 yd³. At 1.40 tons per yd³ that is about 4.1 tons.

Driveway: 50 ft × 12 ft at 4 in

Area = 600 ft². Volume = 600 × 0.333 = 200 ft³ = 7.41 yd³. Add 10% = 8.15 yd³, or about 11.4 tons at 1.40 tons per yd³.

Quick reference

Gravel Coverage and Weight Charts

Typical figures for planning. Always confirm density with your supplier.

Gravel coverage by depth

DepthPer cubic yardPer ton (1.4 t/yd³)
2 in162 ft²116 ft²
3 in108 ft²77 ft²
4 in81 ft²58 ft²
6 in54 ft²39 ft²

Gravel weight per cubic yard

MaterialTypical tons per yd³
Crushed stone1.35 to 1.50
Pea gravel1.30 to 1.45
River rock1.30 to 1.40
Limestone1.40 to 1.50
Decomposed granite1.40 to 1.70

One cubic yard is 27 ft³, so most gravel weighs roughly 2,600 to 3,000 lb per cubic yard.

FAQ

Gravel Calculator Questions

How do I calculate how much gravel I need?

Measure the area, choose a depth, multiply to get volume, then add a waste allowance. ExactYard does these steps and estimates weight from the selected density.

How much does a cubic yard of gravel weigh?

Most gravel weighs about 1.3 to 1.5 tons (2,600 to 3,000 lb) per cubic yard. Rock type, particle size and moisture all change it, so use your supplier’s figure when you have one.

How many tons of gravel do I need for a driveway?

A 50 × 12 ft driveway at 4 in deep needs about 8.2 yd³, or roughly 11.4 tons with 10% waste at 1.40 tons per yd³.

How much gravel do I need for a paver base?

Paver bases are commonly 4 to 6 in of compacted gravel, plus a thin bedding layer. Use the 6 in preset above and consider a 10 to 15% waste allowance for compaction.

How much extra gravel should I order?

It depends on the area’s shape, edges, uneven ground and installation method. Around 10% is a common starting point, and compacted base layers often need more.

Can I calculate gravel cost?

Yes. Enter your local price per ton and the calculator estimates material cost from the order weight. Delivery, tax and supplier fees are not included.

Should I order by cubic yards or tons?

Follow your supplier’s selling method. If they give coverage or density guidance, use those figures because actual material properties vary.

Planning a gravel driveway? See Best Gravel for a Driveway for stone types, layers and costs.

How Much Gravel Do I Need?

Use this quick formula: length x width x depth in feet = cubic feet; divide by 27 = cubic yards; multiply by about 1.4 = tons for typical gravel. For example, a 20 x 10 ft area at 3 in deep (0.25 ft) = 50 cu ft = 1.85 cu yd = about 2.6 tons. For a full step-by-step guide, see How Much Gravel Do I Need?

Gravel Coverage per Ton

The table below shows how much area one ton of typical gravel covers at different depths.

DepthCoverage per ton
2 in deepabout 116 sq ft
3 in deepabout 77 sq ft
4 in deepabout 58 sq ft
6 in deepabout 39 sq ft

Math: 1 ton = 0.71 cu yd = 19.3 cu ft at 1.40 tons per cubic yard. In reverse, one cubic yard covers about 108 sq ft at 3 in, 162 sq ft at 2 in, and 81 sq ft at 4 in.

How Much Does a Cubic Yard of Gravel Weigh?

About 2,800 lb (1.4 tons) for typical gravel. Note: weights vary with stone type and moisture.

MaterialTypical weight per cubic yard
Common gravel2,800 lb (1.40 t/yd)
Crushed stone #572,700 lb (1.35 t/yd)
Crusher run2,900 lb (1.45 t/yd)
Pea gravel2,800 lb (1.40 t/yd)
Drain rock2,600 lb (1.30 t/yd)
River rockabout 2,700 lb (1.35 t/yd)

How much does a scoop of gravel weigh?

A landscape-yard “scoop” is usually one loader bucket, commonly about half a cubic yard, so roughly 1,300-1,500 lb (about 0.7 ton) of gravel; a full-yard scoop is about 2,800 lb – always confirm the yard’s scoop size before ordering.

How Deep Should Gravel Be?

Landscaping and pathways: 2-3 in. Garden beds: 2-3 in over fabric. Driveways are built in layers totalling 8-12 in (coarse base, mid layer, surface) – see Best Gravel for a Driveway for the layer breakdown. For other materials, try the Crushed Stone Calculator or convert volumes with the Cubic Yards to Tons converter.

Gravel Calculator FAQs

How many yards are in a ton of gravel?

About 0.71 cubic yards for typical gravel at 1.40 tons per yard; denser crusher run is about 0.69.

How much gravel do I need for a 20 x 20 ft area?

At 3 in deep: 100 cu ft = 3.70 cu yd = about 5.2 tons.

How many square feet does a yard of gravel cover?

About 108 sq ft at 3 in deep (162 at 2 in, 81 at 4 in).

Should I buy gravel by the ton or by the yard?

Bulk yards sell by the ton or by the scoop/yard depending on region; what matters is total coverage – convert with the weights table above or the Cubic Yards to Tons converter.

Gravel Cost Calculator

Enter the amount you need and your price per unit to estimate material cost, then add delivery to see the total.

Material cost: $400.00

Total cost including delivery: $400.00

Prices vary by material, supplier and region. Confirm the final quote before ordering.

Figuring Gravel for Driveways & Paths

When you are figuring gravel for a driveway or a path, start with depth, not just area. Measure the length and width, choose the finished depth for the surface layer, and work out the volume before you convert it to cubic yards or tons. Driveways usually need a compacted base layer plus a surface layer, while paths and decorative beds are often finished at about 2 to 3 inches deep. Add a small waste allowance for uneven ground and settling, confirm the density with your supplier, and check the layer breakdown in our guide to the best gravel for a driveway.

How much does gravel cost per ton?

Typical gravel costs about $25 to $60 per ton, depending on the type of gravel and the region. Crushed stone, pea gravel, river rock and limestone can all sit at different points in that range, and delivery, minimum loads and local supply can change the final price. Use the typical range for planning only and confirm the delivered price with a local supplier.

How much is a yard of gravel?

One cubic yard of gravel weighs about 1.4 tons, so at typical prices of about $25 to $60 per ton, a yard of gravel costs roughly $35 to $85. The exact figure depends on the gravel type and density, because a denser material gives more tons per yard, and on local pricing and delivery charges.

Related calculators: for a finer material, try the sand calculator.

Related calculators and guides

Compare landscaping material prices by state, try the river rock calculator, and read how much a cubic yard of gravel weighs.

Ordering gravel by weight? Convert tons to cubic yards

Many yards sell gravel by the ton while your project is measured in cubic yards, and the two do not convert one-to-one: a cubic yard of gravel weighs roughly 1.3 to 1.4 tons depending on the stone type and how wet it is. If a supplier has quoted you a weight — or your truck or trailer limit is in tons — use the gravel tons to yards calculator to convert in either direction with the right density for your material before you order.

Related calculators: for stormwater storage, try the dry well calculator.

Gear Up for the Job: Our Product Picks

Hand-picked tools and gifts matched to this kind of project, each with honest pros and cons:

Or browse the full shelf: all Product Picks.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators