Start calculating

Topsoil Calculator

Last reviewed: November 14, 2026. Formulas checked against standard industry conversions. How we calculate.

Quick answer: Cubic yards = area in square feet x depth in inches / 324. For a 1,000 sq ft lawn at 4 in deep, that is 12.3 cubic yards; order about 13.5-14 cubic yards with settling. Use the calculator below for your exact size and depth.

Topsoil Calculator

Find out how many cubic yards of topsoil your lawn, garden or raised bed needs. Get tons, bags and cost in one step with this free online topsoil calculator.

0 cubic yards to order
  • Area–
  • Without extra–
  • Cubic feet–
  • Estimated weight–
  • 0.5 cu ft bags–
  • 0.75 cu ft bags–
  • 1 cu ft bags–
  • Estimated bulk cost–

Results update as you type. Weight and cost are estimates.

How to Calculate How Much Topsoil You Need

  1. Measure the area in square feet (length × width). For a circle, use 3.1416 × radius × radius. Split odd shapes into rectangles and add them.
  2. Choose a depth and convert it to feet by dividing inches by 12.
  3. Multiply area × depth to get cubic feet.
  4. Divide by 27 to get cubic yards.
  5. Add about 10% because loose soil settles.
Cubic yards = (square feet × depth in feet) ÷ 27

Example: a 20 × 30 ft lawn, 4 inches deep: 600 sq ft × 0.333 = 200 cubic feet ÷ 27 = 7.41 cubic yards. With 10% extra, order about 8.15 cubic yards.

How Much Topsoil Do I Need for a Lawn?

A new lawn needs 4-6 inches of topsoil. Fixing bare patches needs 1-2 inches. Top dressing an existing lawn needs only about a half inch. Use the depth selector in the calculator, or enter your own depth.

Topsoil Coverage: How Much Area Does One Yard Cover?

One cubic yard of topsoil covers 324 square feet at 1 inch deep, 108 square feet at 3 inches, 81 square feet at 4 inches, and 54 square feet at 6 inches.

DepthSquare feet per cubic yard
0.5 inch648
1 inch324
2 inches162
3 inches108
4 inches81
6 inches54
12 inches27

Raised Garden Bed Soil Calculator

For a raised bed, multiply length × width × height in feet. A 4 × 8 ft bed that is 12 inches tall holds 32 cubic feet, which is about 1.19 cubic yards. Choose “Raised garden bed” in the calculator and enter the bed size. If you are building several beds, change “Number of areas”.

Raised beds often use a blend of topsoil and compost instead of topsoil alone, so check the mix you plan to buy.

Topsoil Calculator in Tons

Topsoil weighs about 2,000-2,700 lb per cubic yard, roughly 1-1.35 tons, depending on how wet it is. Some suppliers sell by the ton, so the calculator shows an estimated weight. Ask your supplier for their exact weight per yard.

How Many Bags of Topsoil Do I Need?

Bag sizeBags per cubic yard
0.5 cu ft54
0.75 cu ft36
1 cu ft27

Bags suit small jobs. Above about 1-2 cubic yards, bulk delivery is usually cheaper.

Topsoil Cost

Bulk topsoil is often sold per cubic yard, and prices vary widely by region and soil quality. Delivery fees are usually extra. Enter your local price in the calculator for an estimate.

Tips to Order the Right Amount

Topsoil Calculator FAQs

How do I calculate how much topsoil I need?

Multiply the area in square feet by the depth in feet, then divide by 27 to get cubic yards. Add about 10% for settling.

How much does a cubic yard of topsoil weigh?

About 2,000-2,700 lb, depending on moisture.

How much area does one yard of topsoil cover?

About 81 sq ft at 4 inches deep, 108 sq ft at 3 inches and 54 sq ft at 6 inches.

How much topsoil do I need for a new lawn?

Spread 4-6 inches. A 20 × 30 ft lawn at 4 inches needs about 7.4 cubic yards before extra for settling.

How much soil do I need for a raised garden bed?

A 4 × 8 ft bed that is 12 inches tall needs 32 cubic feet, about 1.19 cubic yards.

How Much Topsoil Do I Need?

Use this quick formula: area in square feet × depth in inches ÷ 324 = cubic yards. Equivalently, length × width × depth in feet ÷ 27 = cubic yards.

Worked example: a 1,000 sq ft lawn at 4 in deep needs 1,000 × 4 ÷ 324 = 12.3 cubic yards, about 13.6 tons, using 1 cubic yard of topsoil = about 2,200 lb = 1.10 tons. Topsoil settles and compacts roughly 10%, so ordering about 13.5–14 yards is sensible for a new lawn.

Topsoil Coverage per Cubic Yard

DepthSquare feet covered by one cubic yard
1 in324 sq ft
2 in162 sq ft
3 in108 sq ft
4 in81 sq ft
6 in54 sq ft
8 inabout 41 sq ft
12 in27 sq ft

One ton of topsoil (about 0.91 cubic yards) covers about 98 sq ft at 3 in deep.

How Many Bags of Topsoil in a Cubic Yard?

One cubic yard = 27 cubic feet, so the number of bags depends on the bag size.

Bag sizeBags per cubic yard
40 lb / 0.75 cu ft bagabout 36 bags
1 cu ft bag27 bags
1.5 cu ft bag18 bags

Always check the bag label — bag sizes vary. Bags make sense for small jobs (under about 1–2 yards); bulk delivery is far cheaper per yard beyond that.

How Deep Should Topsoil Be?

  • New lawn: 4–6 in
  • Topdressing an existing lawn: 1/4–1/2 in
  • Vegetable and flower beds: 6–8 in
  • Raised beds: 8–12 in (often a topsoil-compost mix)
  • Filling low spots: fill, level and let settle, then top up.

Topsoil vs fill dirt

Topsoil is the screened, organic-rich surface layer for growing; fill dirt is plainer subsoil for grading and filling. If you are moving plain fill rather than growing soil, use our Dirt Calculator, and to convert between volume and weight, use our Cubic Yards to Tons converter.

Topsoil Calculator FAQs

How many yards of topsoil do I need for 1,000 square feet?

12.3 cubic yards at 4 in deep; order about 13.5–14 with settling.

How much does a cubic yard of topsoil weigh?

About 2,200 lb (1.1 tons) dry; wet topsoil can reach about 2,700 lb or more.

How many square feet does a ton of topsoil cover?

About 98 sq ft at 3 in deep; about 295 sq ft at 1 in.

How much does topsoil cost?

Bulk topsoil typically costs about $20–$50 per cubic yard plus delivery, and screened or premium blends cost more; bagged topsoil works out several times more per yard. Prices vary by region.

Related calculators: if your measurements are in feet, the feet to yards converter can help convert lengths first.

Topsoil for a New Lawn or Under Sod

For a new lawn or under sod, spread 4-6 inches of topsoil, worked into the surface and levelled before seeding or laying sod. The worked examples below use the coverage formula above, area in square feet times depth in inches divided by 324.

Worked example, 1,000 sq ft: at 4 in deep, 1,000 x 4 / 324 = 12.3 yd3; at 6 in deep, 1,000 x 6 / 324 = 18.5 yd3. Order the 6 in figure where the ground is uneven or the existing soil is poor, and add about 10% for settling on top of either figure.

How Much Does a Cubic Yard of Topsoil Weigh?

One cubic yard of topsoil weighs about 2,200 lb, roughly 1.1 tons, varying with moisture. This site uses 1.10 t/yd3 as its canonical weight for topsoil. At that canonical rate, 12.22 yd3 weighs about 13.44 tons; the calculator’s own default weight setting is Average at 2,400 lb per yard, which gives its default 14.67 tons.

How many bags of topsoil do I need for the calculator’s default result?

The calculator’s default result is 12.22 yd3 to order, from 11.11 yd3 without extra plus 10% for settling. Its raw volume is 300.0 cu ft, and with settling it is 330 cu ft, which is what the bag counts use. Using the bag sizes in the calculator, that default result needs the following bags, generated from the calculator’s own bag outputs.

Bag sizeBags for 12.22 yd3 to order
0.5 cu ft bags660
0.75 cu ft bags440
1 cu ft bags330

Worked example near the coverage content: 1,000 sq ft at 4 in deep needs 12.3 yd3, and the same 1,000 sq ft at 6 in deep needs 18.5 yd3, matching the coverage of 81 sq ft per cubic yard at 4 in and 54 sq ft per cubic yard at 6 in.

Related calculators

Planning a lawn or garden project? Try the sod calculator for new turf, check landscaping material prices by state, estimate rubber mulch for play areas, or work out grass seed coverage.

Gear Up for the Job: Our Product Picks

Hand-picked tools and gifts matched to this kind of project, each with honest pros and cons:

Or browse the full shelf: all Product Picks.

Topsoil for Common Lawn Sizes

New lawns need 4 to 6 inches of topsoil (see the depth guide above). Here is what that works out to at the sizes people actually order for, before settling — add about 10 percent when you order, as the tips above recommend:

Lawn sizeAt 2 inchesAt 4 inchesAt 6 inches
1,000 sq ft6.2 yd³12.3 yd³18.5 yd³
2,500 sq ft15.4 yd³30.9 yd³46.3 yd³
5,000 sq ft30.9 yd³61.7 yd³92.6 yd³
10,000 sq ft61.7 yd³123.5 yd³185.2 yd³

At the standard planning weight of 1.1 tons per cubic yard, the 4-inch column is roughly 13.6 tons for 1,000 sq ft, 34 tons for 2,500 sq ft and 68 tons for 5,000 sq ft — which is why lawns this size are always a bulk delivery job, never a bag job.

Leveling and Grading a Yard with Topsoil

For low spots over grass, fill in lifts of 1 to 2 inches at a time and let the grass grow through between lifts. Deeper holes are faster stripped: lift the sod, fill to level, firm it, and put the sod back. A 10 by 10 ft hollow averaging 3 inches low needs about 0.93 cubic yards — call it a yard with settling.

For grading around a house, the soil should fall away from the foundation — about an inch per foot for the first several feet, and never less than roughly 6 inches of fall over the first 10 feet — so rain runs away from the walls instead of pooling against them. Keep the finished soil level below the top of the foundation and below siding or brick ledges, and re-check the slope after the first heavy rain, once the new soil has settled.

Screened vs Unscreened Topsoil

Screened topsoil has been pushed through a mesh to remove rocks, roots and clumps. It spreads evenly, rakes out smoothly and gives seed and sod clean contact with the soil, so it is the right buy for lawns, beds and any surface that stays visible — and it costs more for exactly that reason. Unscreened topsoil is as-dug soil with whatever was in the ground still in it. It is the cheaper choice for filling, rough grading and building up levels where a screened layer will go over the top anyway. Between the two sit topsoil-compost blends, which add organic matter and are a good default for new garden beds. Whatever you buy, ask the supplier what the soil was screened to and where it came from — good yards answer both without blinking.

How Much Does Topsoil Weigh? Moisture Makes the Difference

This site plans on 2,200 lb (1.1 tons) per cubic yard, the midpoint of the widely published 2,000 to 2,700 lb range. Where your load falls in that range is mostly about water:

Topsoil conditionWeight per cubic yardTons per cubic yard
Dry, screened2,000 to 2,200 lb1.0 to 1.1
Moist2,300 to 2,600 lb1.15 to 1.3
Wet, after heavy rain2,700 lb and up1.35 and up

Quick conversions at the planning weight: 1 cubic yard is 1.1 tons, 5 yards is 5.5 tons, 10 yards is 11 tons, and 1 ton is about 0.9 cubic yards — enough to cover roughly 98 sq ft at 3 inches deep. If you are collecting rather than taking delivery, respect the weight: most half-ton pickups are at their payload limit around half to three-quarters of a cubic yard of topsoil, so check the payload sticker on the door jamb before letting the yard load you up.

Topsoil vs Compost vs Garden Soil

They are not interchangeable. Topsoil is the base layer — screened mineral soil for building depth, lawns and grading, sold cheaply in bulk. Compost is decomposed organic matter: it is a feed and conditioner, not a base — spread 1 to 2 inches and till it into the top of the topsoil, or use it as a mulch on beds. Garden soil is a bagged blend, usually topsoil plus compost and other amendments, priced per bag for raised beds and planters where a bulk delivery makes no sense. The short rule: shape and level with topsoil, feed with compost, and buy garden soil only when the project is small enough to carry home.

More Topsoil Questions

Screened or unscreened topsoil — which should I buy?

Buy screened for lawns, beds and anywhere the soil is the finished surface: it has been sifted to remove rocks, roots and clumps, so it spreads evenly and seed makes good contact. Unscreened is as-dug soil with debris in it; it costs less and is fine for filling and rough grading where you will cover it. Blends of topsoil and compost sit between the two and are a good default for new beds.

How much topsoil do I need to level a yard?

Measure the low spots: area in square feet times the average depth you need to add, in inches, divided by 324 gives cubic yards. A 10 by 10 ft hollow that averages 3 inches low needs about 0.93 cubic yards. Fill grassed low spots in lifts of 1 to 2 inches so the grass can grow through, or strip the sod, fill to level, and replace it for deeper holes.

Can I put topsoil over existing grass?

Yes, in thin layers. Topdressing 1/4 to 1/2 inch over existing grass is standard practice and the grass grows through. For anything thicker, the grass underneath will smother and rot — strip the sod first, spread the topsoil, then seed or re-sod on top.

How many tons of topsoil do I need for 1,000 square feet?

At 4 inches deep, 1,000 square feet needs 12.3 cubic yards of topsoil, which weighs about 13 to 14 tons at the standard planning weight of 1.1 tons per cubic yard. Wet soil weighs more, so a load quoted by the ton goes less far after rain.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators