Start calculating

Methodology

Every ExactYard calculator follows the same three steps, and we show the math so you can check it yourself.

Last reviewed: October 2026

The three steps

  1. Measure the space. Length × width gives area; adding depth gives volume.
  2. Convert to what you buy. Volume becomes cubic yards, tons, bags or piece counts.
  3. Add a waste allowance. Extra for cuts, spills and uneven ground.

Formulas by calculator

Gravel, topsoil and mulch (loose material)

Cubic yards = length (ft) × width (ft) × depth (in) ÷ 12 ÷ 27

Tons = cubic yards × density. We use about 1.4 tons per cubic yard for gravel; the exact figure varies by stone type and moisture.

Example: 24 ft × 12 ft × 3 in = 2.67 yd³, or about 3.7 tons.

Open the gravel calculator

Mulch bags

Bags = cubic feet needed ÷ cubic feet per bag

A 2 ft³ bag means 13.5 bags per cubic yard; a 3 ft³ bag means 9 bags per cubic yard.

Open the mulch calculator

Pavers

Pavers = project area ÷ area of one paver, plus waste

We add 5–10% for cuts, more for diagonal or curved layouts.

Open the paver calculator

Fence posts

Posts = fence length ÷ post spacing + 1

Add extra posts for corners and gates.

Open the fence calculator

Concrete

Cubic yards = length (ft) × width (ft) × thickness (in) ÷ 12 ÷ 27

Bag counts depend on bag yield, which is printed on each bag.

Open the concrete calculator

Default assumptions

ItemValue we useWhy it varies
Gravel densityabout 1.4 tons per yd³Stone type, size, moisture
Waste allowanceYou choose (typical 5–10%)Cuts, spills, uneven ground
Cubic yard27 cubic feetFixed

Why these are estimates

Gravel and soil compact after installation, moisture changes weight, and ground is rarely perfectly level. Treat the result as a planning number and confirm quantities with your supplier before ordering.

Sources and corrections

Our conversions use standard unit definitions and supplier coverage charts.

Found a mistake? Tell us and we’ll review it.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators