Last reviewed: November 5, 2026. Formulas checked against standard industry conversions. How we calculate.
Use this free paver sand calculator to work out how much joint sand you need between your pavers — and how much bedding sand to allow underneath them. Enter your patio area and paver size, and the calculator gives you the joint sand in cubic feet and pounds, the number of 50 lb bags to buy, and the bedding sand in cubic feet and cubic yards.
Sand bag weight: 50 lb (fixed)
How much paver sand do I need?
Joint sand fills the gaps between pavers, locking them together and keeping weeds and ants out. The amount you need depends on your patio area, the size of your pavers, the joint width and the paver depth. Smaller pavers have more joints per square foot, so they need more sand — a patio laid with 6×9 in pavers needs about three times as much joint sand as the same area laid with 12×12 in pavers.
The joint sand figures from this calculator already include an allowance for settling and waste, so buy the number of bags shown. If your joints are wider than 1/8 in or your pavers are deeper, the amount goes up.
Worked example: 100 sq ft patio with 12×12 in pavers
A 100 sq ft patio with 12×12 in pavers, 1/8 in joints and 2 3/8 in deep pavers needs 0.82 cu ft of joint sand, which weighs about 82 lb — so buy 2 bags of 50 lb sand. For the bedding (levelling) layer at 1 in deep, allow 100 ÷ 12 = 8.33 cu ft, or 0.31 cu yd.
A larger 200 sq ft patio with 6×9 in pavers, the same 1/8 in joints and 2 3/8 in depth needs 2.75 cu ft of joint sand (about 275 lb), so buy 6 bags. Bedding sand at 1 in deep is 16.67 cu ft (0.62 cu yd).
Bags of joint sand by patio size
For 12×12 in pavers with 1/8 in joints and 2 3/8 in depth, using 50 lb bags:
| Patio size | Joint sand | Weight | Bags to buy |
|---|---|---|---|
| 100 sq ft | 0.82 cu ft | 82 lb | 2 |
| 200 sq ft | 1.65 cu ft | 165 lb | 4 |
| 300 sq ft | 2.47 cu ft | 247 lb | 5 |
How much bedding sand do I need?
Bedding sand (also called levelling sand) goes under the pavers, usually 1 in deep after screeding. The volume is simply your patio area in square feet divided by 12 to get cubic feet, then divided by 27 for cubic yards. A 100 sq ft patio needs 8.33 cu ft (0.31 cu yd) of bedding sand at 1 in deep.
How to calculate paver sand
First work out how many pavers fit in a square foot: 144 divided by the paver area in square inches. Multiply that by the paver perimeter in inches, the joint width in inches and the paver depth in inches, then divide by 1,728 to convert cubic inches to cubic feet. Multiply by your patio area. Joint sand weighs about 100 lb per cubic foot, and bags are 50 lb, so divide the weight by 50 and round up. The calculator above does all of this for you.
Frequently asked questions
How much sand do I need for a 100 sq ft patio?
With 12×12 in pavers and 1/8 in joints, you need 0.82 cu ft of joint sand (82 lb), so buy 2 bags of 50 lb sand. Allow another 8.33 cu ft (0.31 cu yd) of bedding sand at 1 in deep.
Should I use polymeric sand or regular sand?
Polymeric sand hardens when wet, which locks pavers together and resists weeds and ants better than regular joint sand. It costs more, but it is the usual choice for patios and walkways. Regular sand is cheaper and easier to re-do, but it washes out faster.
How deep should the sand joints be?
The joints should be filled to the full depth of the paver — usually 2 3/8 in for standard pavers. Sweep the sand in, compact the pavers, then top the joints up and sweep again.
How much does paver sand weigh per cubic foot?
About 100 lb per cubic foot. A 50 lb bag is about half a cubic foot.
How much bedding sand do I need under pavers?
Allow 1 in of bedding sand, screeded level. That is your patio area in square feet divided by 12 in cubic feet — 8.33 cu ft (0.31 cu yd) for a 100 sq ft patio.
Related calculators: Paver Calculator · Paver Base Calculator