Start calculating

Firewood Calculator — How Much Firewood Do I Need?

Last reviewed: November 14, 2026. Formulas checked against standard industry conversions. How we calculate.

Quick answer: Cords = heated area in square feet / 1,000 x climate factor x heat-share factor x burn months / 6. For a 1,500 sq ft home in a cold climate (factor 2.6) heated primarily with wood for 6 months, that is 3.9 cords, or about 12 face cords of 16-in logs. Use the calculator below for your exact home and climate.

Most wood-heated homes burn 3 to 5 cords of firewood each winter. A 1,500 sq ft home in a cold climate needs about 3.9 cords as its primary heat source (about 1.9 cords in a mild climate), and a full cord is a neatly stacked 4 × 4 × 8 ft pile — 128 cubic feet. Use the calculator below to get your number, check a stack, and price the wood.

Firewood is sold by the cord, not by the truckload, and a face cord is not a full cord — it is about one-third of one. This page gives you three calculators in one: how much firewood you need for the winter, how many cords are in a stack, and what it will cost — plus the extension-backed tables and worked examples behind the numbers.

Firewood Calculator

1. How much firewood do I need?

Enter the area your stove actually heats, your climate, and how long you burn. The estimate uses university extension benchmarks (see the table below).





Estimated cords for the winter: 3.9 cords

That is about 11.7 face cords (16-inch logs).

University of New Hampshire Extension reports that a fairly weather-tight 1,500-square-foot New Hampshire home burns four to five cords of seasoned wood in an average heating season — this calculator gives 4.8 cords for that home in a very cold climate.

2. Stack size to cords

Measure a neatly stacked pile and this converts it to full cords and face cords.





Stack volume: 128.0 cubic feet

Full cords: 1.00 (volume ÷ 128)

Face cords (16-in logs): 3.00

A full cord is 128 cubic feet (a 4 × 4 × 8 ft stack). A face cord is a 4 × 8 ft stack one log-length deep — with 16-inch logs, one face cord is about 42.7 cubic feet, or 0.33 cords.

3. Firewood cost

Price a load at the going rate, or enter your supplier’s price.



The default $300 is the 2026 national average price per full cord (Angi, updated October 2026). Seasoned hardwood typically runs $250–$500 per cord delivered.

Total cost: $900

That is $100 per face cord (16-in logs).

Face cord vs full cord

A full cord is a neatly stacked pile 4 feet high, 4 feet deep, and 8 feet long — 4 × 4 × 8 = 128 cubic feet, including the air gaps between logs. A face cord is a stack 4 feet high and 8 feet long, but only one log-length deep. With 16-inch logs that is 4 × 8 × 1.33 ft = 42.7 cubic feet, about one-third of a full cord — so three 16-inch face cords make about one full cord. Utah State University Extension gives the face cord as 32 to 48 cubic feet, depending on piece length.

Firewood is legally sold by the cord, not by the load. NIST Handbook 130 — the model weights-and-measures regulation most states adopt — requires firewood to be sold by the cord or a fraction of a cord, and terms such as “truckload” or “pile” are not legal measures (Washington State Department of Agriculture). Always ask for the price per cord, and measure the stack when it arrives.

MeasureStack sizeCubic feetCords
Full cord4 ft × 4 ft × 8 ft1281.00
Face cord (16-in logs)4 ft × 8 ft × 16 in42.70.33
Face cord (12-in logs)4 ft × 8 ft × 12 in320.25
Face cord (24-in logs)4 ft × 8 ft × 24 in640.50
Half cord4 ft × 4 ft × 4 ft640.50

How many cords of firewood do I need?

The calculator above uses this formula:

Cords = (heated area ÷ 1,000) × climate factor × heat-share factor × (burn months ÷ 6)

Climate factors are cords per 1,000 sq ft for a 6-month season with wood as the primary heat source: mild 1.25, cold 2.6, very cold 3.2. The heat-share factor is 1.0 for primary heat and 0.5 for supplemental heat (wood supplies about half the heat). The factors are set so the results land on the published extension figures:

University of New Hampshire Extension: a fairly weather-tight 1,500 sq ft New Hampshire home burns four to five cords of seasoned wood in an average heating season — the calculator gives 4.8 cords for that home in a very cold climate. Oklahoma State University Extension (NREM-5154): one or two cords per 1,000 square feet may be all you need — the calculator’s mild-climate figures (1.3 to 3.1 cords) sit inside that range. West Virginia University Extension: about four cords for a 1,500 sq ft home — the calculator gives 3.9 cords in a cold climate. Montana State University Extension: two to four cords for a medium-sized modern home heated entirely with wood, and one to two cords when wood supplies only part of the heat — the calculator gives 3.9 cords (primary) and about 2.0 cords (supplemental) for a 1,500 sq ft home in a cold climate. Iowa State University Extension puts typical home heating at 3 to 7 cords a year, a range these figures fall inside.

Heated areaMild climateCold climateVery cold climate
1,000 sq ft1.3 cords2.6 cords3.2 cords
1,500 sq ft1.9 cords3.9 cords4.8 cords
2,000 sq ft2.5 cords5.2 cords6.4 cords
2,500 sq ft3.1 cords6.5 cords8.0 cords

Estimated cords per winter with wood as the primary heat source and a 6-month burn season. Run the calculator above with the same area, climate, and season length to check any cell. With wood as supplemental heat, the figures are about half these amounts. A poorly insulated home, a low-efficiency stove, or a longer season will push the number up — order a little extra rather than running short in February.

Firewood species: how much does a cord weigh, and how much heat does it give?

Weight is what matters: Utah State University Extension notes that a wood’s dry weight per volume — its density — drives its heat per cord, so denser, heavier wood holds more heat. A cord of white oak gives about 80% more heat than a cord of white pine (29.1 vs. 15.9 million BTU), and weighs nearly twice as much per cord (4,200 vs. 2,250 lb). Seasoned (dry) weights and heat per cord below are from Utah State University Extension’s “Wood Heating,” Table 1 (Firewood Facts).

SpeciesSeasoned weight per cord (lb)Heat per cord (million BTU)Heat rank
White oak4,20029.1Highest
Maple, other (hard maple)3,68025.5High
Red oak3,52824.6High
White ash3,47224.2High
Birch2,99220.8Medium
Ponderosa pine2,33616.2Low
White pine2,25015.9Low

Green (freshly cut) wood weighs far more — white oak is 5,573 lb per cord green, versus 4,200 lb seasoned — because of the water it still holds. Burn only seasoned wood: it should be dry, with cracked ends and a hollow sound when two pieces are knocked together, and it gives off far more usable heat than green wood.

How much does firewood cost?

In 2026, the national average for a full cord of firewood is $300, with most homeowners paying between $150 and $500, according to Angi (updated October 2026). Seasoned hardwood typically runs $250 to $500 per cord, and softwood $150 to $300 per cord. Delivery usually adds $25 to $75 per load, stacking $25 to $80 per load, and seasoned wood costs 30% to 50% more than green wood. Prices also run 20% to 30% higher in winter. A separate 2026 market roundup puts the average delivered cord at $250 to $400. The table below prices a winter’s wood at $275, $300, and $400 per cord — the delivered-hardwood band most buyers see in 2026.

CordsAt $275 / cordAt $300 / cord (2026 average)At $400 / cord
1 cord$275$300$400
2 cords$550$600$800
3 cords$825$900$1,200
4 cords$1,100$1,200$1,600
5 cords$1,375$1,500$2,000

A face cord (16-inch logs) is about one-third of a full cord, so it costs about one-third as much — $75 to $200 is the typical 2026 range for a face cord, according to Angi. Use the cost calculator above for any cord count and price, including delivery.

Worked example

A stack 4 ft high, 4 ft deep, and 8 ft long holds 4 × 4 × 8 = 128 cubic feet. Divide by 128 cubic feet per cord: 128 ÷ 128 = 1.00 full cord. At the 2026 average of $300 a cord, that stack costs $300.

The same stack cut to 16-inch logs is one face cord: 4 ft × 8 ft × 16 in = 42.7 cubic feet, and 42.7 ÷ 128 = 0.33 cords.

And a 1,500 sq ft home with wood as its primary heat in a cold climate, burning for 6 months: (1,500 ÷ 1,000) × 2.6 × 1.0 × (6 ÷ 6) = 3.9 cords for the winter — about 12 face cords of 16-inch logs.

Frequently Asked Questions

How much firewood do I need for winter?

Most homes that heat mainly with wood burn 3 to 5 cords per winter. A 1,500-square-foot home in a cold climate needs about 3.9 cords as its primary heat source over a 6-month season, and about 1.9 cords in a mild climate. University of New Hampshire Extension reports that a fairly weather-tight 1,500-square-foot New Hampshire home burns four to five cords of seasoned wood in an average heating season. Use the calculator above with your heated area, climate, and burn-season length for a tailored estimate.

What is a face cord?

A face cord is a stack 4 feet high and 8 feet long, one log-length deep. With 16-inch logs it holds about 42.7 cubic feet, or 0.33 cords — about one-third of a full cord. Three 16-inch face cords make about one full cord (128 cubic feet).

How many cords are in a stack of firewood?

Measure the stack’s length, height, and depth in feet, multiply them for the cubic feet, and divide by 128. A 4 × 4 × 8-foot stack is 128 cubic feet, which is exactly 1.00 full cord. Use the ‘Stack size to cords’ calculator above for any stack size.

How long does a cord of firewood last?

If you burn wood every day for heat, a cord lasts about one to two months, according to Angi’s 2026 cost data. Over a full winter, most wood-heated homes use 3 to 5 cords, so a single cord is roughly a month or two of steady heating — less in a very cold climate or a large home, and longer if wood is only supplemental heat.

How much does a cord of firewood cost?

In 2026, the national average is $300 per full cord, with most homeowners paying between $150 and $500, according to Angi (updated October 2026). Seasoned hardwood typically runs $250 to $500 per cord, and the calculator above defaults to $300. Delivery usually adds $25 to $75 per load.

How can I check that I’m getting a full cord?

Measure the delivered stack: length × height × depth in feet should total 128 cubic feet for a full cord, or about 42.7 cubic feet for a 16-inch face cord. NIST Handbook 130, the model regulation most states adopt, requires firewood to be sold by the cord or a fraction of a cord — ‘truckload’ and ‘pile’ are not legal measures. Buy from a seller who quotes a price per cord, and check that the wood is seasoned: dry, with cracked ends and a hollow sound when two pieces are knocked together.

Related Calculators

Sources: University of New Hampshire Extension, “Cutting Your Own Firewood”; Oklahoma State University Extension, “Firewood: Recommendations for Using Firewood as an Indoor Heating Source” (NREM-5154); Utah State University Extension, “Wood Heating,” Table 1 (Firewood Facts); NIST Handbook 130, Uniform Regulation for the Method of Sale of Commodities, §2.4 (Firewood); Angi, “How Much Does a Cord of Wood Cost? [2026 Data]” (updated October 13, 2026).

Last reviewed: November 2026. Reviewed by Faizan Ellahi, ExactYard.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators