Start calculating

Fire Glass Calculator

Last reviewed: November 14, 2026. Formulas checked against standard industry conversions. How we calculate.

Quick answer: A 36-inch round fire pit at 2 inches deep needs about 71 lb of fire glass — 8 ten-pound bags, about $200 at $25 a bag. Use the calculator below for your pit size and depth.

Use this free fire glass calculator to work out how many pounds and bags of fire glass your fire pit needs. Pick a round or square pit, enter the size and depth, and get an instant estimate in pounds, bags and cost.

Fire glass is tempered glass made for fire pits: it covers the burner, reflects the flames and comes in a range of colors. A lava-rock base layer underneath cuts the amount of glass you need.

Fire Glass Calculator

Choose your fire pit shape, enter the size and depth, and the calculator works out the pounds, bags and cost.

2–3 in over the burner is typical.
Glass size is cosmetic — coverage is the same for all sizes.
Fire glass typically runs $20–$30 per 10-lb bag.

How much fire glass by pit size

Worked examples at the calculator defaults — 10-lb bags at $25 a bag.

Fire pitDepthAreaVolumeFire glassBagsCost
Round 24 in2 in3.14 sq ft0.52 cu ft31.42 lb4$100
Round 36 in2 in7.07 sq ft1.18 cu ft70.69 lb8$200
Round 48 in2 in12.57 sq ft2.09 cu ft125.66 lb13$325
Square 48 × 24 in3 in8.00 sq ft2.00 cu ft120.00 lb12$300
Square 36 × 36 in2 in9.00 sq ft1.50 cu ft90.00 lb9$225

Coverage rule

Fire glass weighs about 60 lb per cubic foot, so the rule of thumb is simple: 10 lb covers about 1 sq ft at 2 in deep. Double the depth to 4 in and you need about 20 lb per square foot; halve it to 1 in and you need about 5 lb per square foot. One cubic foot of fire glass is about 60 lb, so a 10-lb bag is about one-sixth of a cubic foot.

How deep should fire glass be

Fire glass should be 2–3 in deep over the burner — deep enough to hide the burner ring, shallow enough that the flames stay visible. Start with a lava-rock base layer up to just below the burner, then add the glass on top. The base layer cuts the amount of glass you need and keeps the burner from sitting in a deep bed of glass, which can smother the flame.

Fire glass vs lava rock

Fire glass is decorative: it reflects heat and light, comes in colors, and gives a clean, finished look. Lava rock is the cheaper, practical base layer — it holds heat, hides the burner and gas lines, and costs far less per pound. Most fire pits use both: lava rock underneath, fire glass on top. Work out the base layer with the Lava Rock Calculator.

Frequently asked questions

How much fire glass do I need?

Multiply the fire pit area in square feet by the depth in feet, then multiply by 60 lb per cubic foot. A 36-inch round pit at 2 inches deep is 7.07 sq ft, or 1.18 cubic feet, so it needs 70.69 lb — buy 8 ten-pound bags.

How many pounds of fire glass per square foot?

About 10 lb per square foot at 2 inches deep. At 3 inches deep, allow about 15 lb per square foot.

What size fire glass should I use?

Half-inch fire glass is the most common size and works for most fire pits. Use 3/4-inch or 1-inch glass for larger burners and windy spots, where the heavier pieces stay put better.

Can I mix fire glass with lava rock?

Yes. Put lava rock down first as a base layer up to just below the burner, then spread the fire glass on top. You get the look of glass for less money, because the lava rock does the filling.

How much does fire glass cost?

Fire glass typically costs $20–$30 per 10-lb bag. The calculator uses $25 a bag as the default.

Is fire glass safe?

Yes. Fire glass is tempered glass rated for fire pits, so it will not melt or catch fire. Never use regular glass, and never use river rock, which can trap water inside and pop when it heats up.

Related calculators: Fire Pit Calculator · Lava Rock Calculator.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators