Start calculating

Privacy Fence Calculator

Last reviewed: November 16, 2026. Formulas checked against standard industry conversions. How we calculate.

Last reviewed: November 16, 2026. Formulas checked against standard industry conversions. How we calculate.

Quick answer: A 100-foot, 6-foot-tall stockade privacy fence with 8-foot panels needs 13 sections, 14 posts (8 ft), 234 pickets exact — 258 to buy with 10% waste — 26 rails and 28 x 80-lb bags of concrete, covering 600 sq ft.

Use this free privacy fence calculator to work out how many pickets, posts, rails and bags of concrete you need for a stockade, shadowbox or board-on-board privacy fence. The Fence Calculator counts generic panels and pickets, but a privacy fence uses far more pickets when boards overlap — this calculator counts pickets by fence style, so shadowbox and board-on-board fences are not undercounted.











A privacy fence is built from individual 5.5-inch pickets, and the style decides how many pickets each panel needs. A stockade fence has one layer of pickets side by side. A shadowbox fence has pickets on both sides of the rails, alternating, so it uses about one and a half times as many. A board-on-board fence overlaps every picket with a second layer, so it uses twice as many. Counting by style is the only way to avoid running short on a shadowbox or board-on-board job.

How a privacy fence is calculated

  1. Sections: fence length / panel width, rounded up.
  2. Posts: sections + 1, for an open run.
  3. Pickets per panel: panel width in inches / 5.5, rounded up — 18 for an 8-ft panel, 14 for a 6-ft panel.
  4. Exact pickets: sections x pickets per panel x style multiplier. Stockade x1, Shadowbox x1.5, Board-on-Board x2.
  5. Pickets to buy: exact pickets x (1 + waste / 100), rounded up. The default waste allowance is 10%.
  6. Rails: 2 per section for fences up to 6 ft tall, 3 per section for an 8 ft fence.
  7. Post length: fence height + 2 ft — an 8 ft post for a 6 ft fence.
  8. Concrete: 2 x 80-lb bags per post, based on a 10-in diameter, 24-in deep hole of about 0.9 cu ft.
  9. Fence area: fence length x fence height, in sq ft.

Worked examples

Example 1 — 100 ft, 6 ft tall, Stockade, 8-ft panels. Sections = 100 / 8 = 13 (rounded up). Posts = 13 + 1 = 14 (8 ft posts). Pickets = 13 sections x 18 per panel x 1 = 234 exact, 234 x 1.10 = 258 to buy. Rails = 2 x 13 = 26. Concrete = 14 posts x 2 = 28 x 80-lb bags. Fence area = 100 x 6 = 600 sq ft.

Example 2 — 60 ft, 6 ft tall, Board-on-Board, 8-ft panels. Sections = 60 / 8 = 8 (rounded up). Posts = 8 + 1 = 9 (8 ft posts). Pickets = 8 sections x 18 per panel x 2 = 288 exact, 288 x 1.10 = 317 to buy. Rails = 2 x 8 = 16. Concrete = 9 posts x 2 = 18 x 80-lb bags. Fence area = 60 x 6 = 360 sq ft.

Example 3 — 80 ft, 6 ft tall, Shadowbox, 8-ft panels. Sections = 80 / 8 = 10. Posts = 10 + 1 = 11 (8 ft posts). Pickets = 10 sections x 18 per panel x 1.5 = 270 exact, 270 x 1.10 = 297 to buy. Rails = 2 x 10 = 20. Concrete = 11 posts x 2 = 22 x 80-lb bags. Fence area = 80 x 6 = 480 sq ft.

Privacy fence materials table

For a 100 ft fence, 6 ft tall, with 8-ft panels and 10% waste.

StyleSectionsPostsPickets exactPickets to buyRails80-lb concrete bagsFence area
Stockade13142342582628600 sq ft
Shadowbox13143513872628600 sq ft
Board-on-Board13144685152628600 sq ft

Stockade vs shadowbox vs board-on-board

Stockade is the classic privacy fence: pickets butted edge to edge on one side of the rails, giving a solid, flat face. It uses the fewest pickets and is the cheapest of the three styles.

Shadowbox puts pickets on both sides of the rails, alternating so the fence looks the same from either side and air can pass through the gaps. It uses 1.5 times as many pickets as a stockade fence of the same length, and it holds up better in wind because it is not a solid sail.

Board-on-board overlaps each picket with a second picket, so there is no gap at all even as the boards shrink and dry. It uses twice as many pickets as a stockade fence, gives the most privacy, and is the best choice where boards are likely to shrink.

For a full cost estimate, use the Fence Cost Calculator, and for the concrete in each post hole, use the Fence Post Concrete Calculator.

Frequently asked questions

How many pickets do I need for a privacy fence?

Count sections, then multiply by the pickets per panel and the style multiplier. An 8-ft panel needs 18 pickets for a stockade fence, 27 for shadowbox and 36 for board-on-board. A 100 ft stockade fence with 8-ft panels needs 234 pickets exact, or 258 with 10% waste.

How many fence posts do I need?

Posts = sections + 1 for an open run, where sections is the fence length divided by the panel width, rounded up. A 100 ft fence with 8-ft panels has 13 sections and 14 posts.

How many rails does a 6 ft privacy fence need?

Two rails per section for fences up to 6 ft tall — one near the top and one near the bottom. An 8 ft fence needs three rails per section, with a middle rail for support.

How much concrete do I need per fence post?

Allow 2 x 80-lb bags per post, based on a 10-in diameter hole 24 in deep, which holds about 0.9 cu ft of concrete. For an exact figure for your hole size, use the Fence Post Concrete Calculator.

How long should fence posts be?

Posts should be the fence height plus 2 ft, so the post goes 2 ft into the ground. A 6 ft fence needs 8 ft posts, and an 8 ft fence needs 10 ft posts.

How far apart should fence posts be?

Posts are spaced by the panel width — 6 ft or 8 ft apart. Eight-foot spacing uses fewer posts and rails, while 6-ft spacing makes a stiffer fence and is better in windy areas.

Related calculators: Fence Calculator · Fence Cost Calculator · Fence Post Concrete Calculator

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators