Last reviewed: October 24, 2026. Formulas checked against standard industry conversions. How we calculate.
How Much Concrete for Fence Posts?
The amount of concrete you need depends on post size, hole diameter and hole depth. Getting these right keeps your fence stable without wasting bags.
Common rules of thumb
- Hole depth: about one third of the post’s total length, and deeper in frost-prone areas.
- Hole diameter: about three times the post width.
Worked example
A 4×4 post (3.5 in wide) in a 10 in diameter hole, 24 in deep. The hole holds about 1,885 cubic inches. The post takes up about 294, so you need roughly 1,590 cubic inches of concrete, or 0.92 cubic feet.
How many bags per post?
| Bag size | Approx. yield |
|---|---|
| 50 lb | 0.375 cu ft |
| 60 lb | 0.45 cu ft |
| 80 lb | 0.60 cu ft |
The example needs about 1.5 bags of 80 lb, so plan on 2 bags per post. Check the yield printed on your bag, because brands vary.
Estimating for the whole fence
Multiply the concrete per post by your post count. Not sure how many posts you need? Read How Many Fence Posts Do I Need?
Tips
- Gate and corner posts usually need bigger holes and more concrete.
- Add 2 to 4 in of gravel at the bottom of the hole for drainage.
- Slope the concrete away from the post at ground level so water runs off.
FAQ
Do I need to fill the whole hole? Usually fill to a few inches below ground level, or to the top if you want a firm collar.
Should I round up? Yes. A partial bag is cheaper than a second trip.