Last reviewed: November 9, 2026. Formulas checked against standard industry conversions. How we calculate.
How to Measure a Yard: Area of Irregular Shapes
Split the yard into simple shapes, find each area and add them up. The calculators below handle shapes, curved edges and map coordinates.
Irregular Shape Area Calculator
Add up the shapes in your yard
Rectangle: length, width. Triangle: base, height. Circle and semicircle: diameter. Trapezoid: parallel side, parallel side, height. All in feet.
How to Work Out the Area of an Irregular Shape
- Sketch the shape and label each straight side with its length.
- Divide it into rectangles, triangles and circle parts. Draw the dividing lines.
- Measure each piece, using the same unit (feet) for every measurement.
- Work out each area with the formula for that shape.
- Add the areas together. Subtract any holes or cut-outs, such as a shed, patio or pond.
| Shape | Area formula |
|---|---|
| Rectangle or square | length × width |
| Triangle | ½ × base × height |
| Circle | π × radius × radius |
| Semicircle | ½ × π × radius × radius |
| Trapezoid | ½ × (side A + side B) × height |
Example: A 30 × 20 ft rectangle (600 sq ft), a triangle with a 10 ft base and 12 ft height (60 sq ft) and a semicircle 12 ft across (56.5 sq ft), minus a 6 × 4 ft shed (24 sq ft): 600 + 60 + 56.5 − 24 = 692.5 sq ft.
How to Measure Your Yard
- Tools: a long tape measure (100 ft), stakes, string, a notepad and a helper.
- Mark the corners with stakes, then run string between them so you measure straight lines.
- Square the corners. To check a right angle, measure 3 ft along one side and 4 ft along the other. The diagonal should be 5 ft.
- Measure each straight side and write it on your sketch. Measure a diagonal in odd shapes so you can split them into triangles.
- Use one unit. Convert inches to feet by dividing by 12 before you calculate.
- On a steep slope, measure along the ground if you are covering it with sod or mulch.
Area of a Yard With Curved Edges (Offset Method)
For a curved bed or lawn edge, run a straight baseline along the shape. At equal spacing along the baseline, measure the distance from the baseline to the edge. Then use the trapezoid rule: spacing × (sum of all offsets − half of the first and last).
Curved edge calculator
More offsets give a more accurate answer. For the example above, 7 measurements across a 20 ft baseline give about 73.3 sq ft.
Area of an Irregular Yard From Coordinates (Shoelace Formula)
If you have mapped the corners of a straight-sided yard as x and y distances from one corner, the shoelace formula gives the exact area. Enter one corner per line, in order around the edge. The calculator also gives the perimeter, which helps with fencing.
Coordinates calculator
The Grid Method
Draw your yard on graph paper to scale, for example one square equals 1 square foot or 2 × 2 feet. Count the full squares, then add up the partial squares and count two halves as one. Multiply the count by the area of one square. It is quick, but it is less accurate than splitting the yard into shapes.
Convert the Area to Other Units
| From | To | Multiply by |
|---|---|---|
| Square feet | Square yards | ÷ 9 |
| Square feet | Square meters | × 0.0929 |
| Square feet | Acres | ÷ 43,560 |
| Square meters | Square feet | × 10.764 |
Next: Turn Your Yard Area Into Materials
Once you know the area, multiply it by the depth to get a volume. Then use a calculator for the material you need:
- Topsoil calculator for lawns and garden beds
- How much gravel do I need for paths, drives and drainage
- Paver base calculator for patios and walkways
- Concrete pad calculator for slabs and pads
- Fence calculator, using the perimeter from the coordinates tool
- How to calculate cubic yards from square feet
Common Mistakes
- Mixing units, such as feet and inches in the same formula.
- Forgetting to subtract cut-outs like sheds, patios and ponds.
- Using the slanted side of a triangle as its height. The height is the straight distance at a right angle to the base.
- Counting an overlap twice when two shapes share an area.
Frequently Asked Questions
How do you work out the area of an irregular shape?
Divide it into simple shapes, work out each area, then add them together and subtract any cut-outs.
How do I find the area of an irregular yard?
Sketch it, divide it into rectangles and triangles, measure each one in feet and add the areas. Use the offset method for curved edges.
How do I measure the area of a curved garden bed?
Use a straight baseline and measure the distance to the edge at equal spacing, then apply the trapezoid rule, as in the curved edge calculator above.
How many square feet are in an acre?
43,560.
How do I convert square feet to square yards?
Divide by 9.
What is the shoelace formula?
A formula that gives the area of any straight-sided shape from the coordinates of its corners.
Related guides
For a step-by-step walkthrough, see how to measure your project area.