Start calculating

Last reviewed: November 11, 2026. Formulas checked against standard industry conversions. How we calculate.

Quick answer: Cubic yards = length in feet x width in feet x depth in inches / 12 / 27. For 100 square feet at 3 inches deep, that is 0.93 cubic yards, or about 13 bags of 2-cu-ft mulch. And 1 cubic yard = 13.5 bags of 2 cu ft mulch.

ExactYard Mulch Calculator

Mulch Calculator: How Much Mulch Do I Need?

Enter your project dimensions, choose your mulch depth and bag size, and get an estimate for volume, bags, waste and cost.

Mulch Calculator

Enter the measurements for the area you want to cover.

ft
ft
ft
ft
ft
in

Enter the finished depth you want the mulch layer to have.

%

Choose the bag volume printed on your mulch package.

$ / yd³
$ / bag

How to Measure for Mulch in Yards

Mulch is sold by volume, most often in cubic yards for bulk delivery or cubic feet for bags. To figure mulch, you only need three numbers: length, width and depth. The calculator above does the math for you, and the steps below show how it works so you can double-check any estimate.

Step 1: Measure the area

Measure the length and width of your bed in feet. For irregular beds, split the area into simple shapes (rectangles, circles, triangles), measure each one and add them together.

  • Rectangle: length × width
  • Circle, such as a tree ring: 3.14 × radius × radius
  • Triangle: ½ × base × height

Step 2: Choose your mulch depth

Most beds need 2 to 3 inches of mulch. Use 3 to 4 inches if you want better weed suppression. Going deeper than 4 inches can hold too much moisture and stress plant roots.

Step 3: Convert to cubic yards

Cubic yards formula Cubic yards = Length (ft) × Width (ft) × Depth (in) ÷ 12 ÷ 27 Order volume = Cubic yards × (1 + waste %)

The 12 converts inches to feet, and the 27 converts cubic feet to cubic yards, because one cubic yard equals 27 cubic feet.

Mulch Coverage Chart

One cubic yard of mulch covers a different area depending on how deep you spread it. Use this chart for a quick estimate before you use the calculator.

Depth Area covered by 1 cubic yard Cubic yards for 100 sq ft 2 cu ft bags for 100 sq ft
1 inch324 sq ft0.315
2 inches162 sq ft0.629
3 inches108 sq ft0.9313
4 inches81 sq ft1.2317

Bag counts are rounded up. Always check the size printed on your bag, because mulch bags come in several sizes, and select the matching bag size in the calculator.

Mulch Calculation Examples

How much mulch do I need for a 10×10 bed?

A 10 ft × 10 ft bed covered 3 inches deep needs 10 × 10 × 3 ÷ 12 ÷ 27 = 0.93 cubic yards. That is about 25 cubic feet, or 13 bags of 2 cu ft mulch. Most people round up to 1 cubic yard.

How much mulch do I need for a 20×15 landscape bed?

A 20 ft × 15 ft area at 3 inches deep needs 20 × 15 × 3 ÷ 12 ÷ 27 = 2.78 cubic yards. Order 3 cubic yards.

How much mulch do I need for a tree ring?

A tree ring with a 4 ft radius has an area of about 50 sq ft (3.14 × 4 × 4). At 3 inches deep that is 0.47 cubic yards, or about 6 bags of 2 cu ft mulch. Keep mulch a few inches away from the trunk instead of piling it against the bark.

How Much Mulch Is in a Scoop?

A scoop is the bucket of a loader or skid steer used at landscape supply yards, and its size depends on the supplier and equipment. Many yards sell a scoop as roughly 1 cubic yard, but smaller buckets hold closer to half a yard and some are heaped higher. There is no universal standard, so ask your supplier how many cubic yards their scoop holds before you order. Then divide the order volume from the calculator by that number to see how many scoops you need.

Understanding Your Results

Base Volume

The amount of mulch required before adding your selected waste allowance.

Order Volume

The base volume plus your extra allowance. This is the number to give your supplier.

Bag Estimate

The order volume converted into whole bags using the bag size you selected.

Bagged vs. Bulk Mulch

Bagged mulch is convenient for small jobs. Bulk mulch usually costs less per cubic foot once you need more than about 2 cubic yards, and it is delivered to your driveway by the yard. Use the optional price fields in the calculator to compare both.

  • 1 cubic yard equals 27 cubic feet.
  • 2 cu ft bags: about 13.5 bags per cubic yard.
  • 3 cu ft bags: 9 bags per cubic yard.

Tips to Avoid Buying Too Much or Too Little

  • Add about 5 to 10 percent extra for uneven ground and settling.
  • If you are topping up old mulch, only count the new depth you are adding, often 1 to 2 inches.
  • Check whether your supplier sells by the cubic yard or by weight, and ask about delivery minimums.
  • Keep mulch away from house siding and foundations, and a few inches back from tree trunks.

How Many Bags of Mulch in a Yard?

One cubic yard equals 27 cubic feet, so bags of 2 cu ft give 13.5 bags per cubic yard and bags of 3 cu ft give 9 bags per cubic yard. Bag counts below are rounded up to whole bags.

Cubic yards2-cu-ft bags3-cu-ft bags
0.575
1149
22718
34127
45436
56845
1013590

No waste is included in this table. Add about 10% extra for settling when you order.

How Much Does a Yard of Mulch Weigh?

A cubic yard of mulch typically weighs 400 to 800 pounds depending on the material and how wet it is; the converters on this site use 0.40 tons (800 lb) per cubic yard as the planning figure.

A 2-cu-ft bag of wood mulch usually weighs about 25 to 40 lb.

How Much Is a Yard of Mulch?

Typical 2026 US prices: bulk mulch is typically about $30-60 per cubic yard plus delivery, and bagged mulch is typically about $3-6 per 2-cu-ft bag. These are typical ranges, and local prices vary. The calculator above estimates cost from your own price inputs.

Bark Mulch: Same Calculator, Different Mulch

Bark mulch, including shredded bark and bark nuggets, uses exactly the same volume math in the calculator above. Bark nuggets settle less than shredded mulch and are often laid slightly thinner around trees and shrubs. Pick the same depth you would use for wood mulch (3 in is typical).

Related calculators: for soil under your mulch, try the topsoil calculator, or browse all our mulch and soil calculators.

Related calculators and guides

Once you have your mulch estimate, check how many bags of mulch you need for 100 square feet, try the rubber mulch calculator for a longer-lasting alternative, convert volumes with the cubic yard calculator, or compare landscaping material prices by state. For a step-by-step walkthrough, see our guide on how to calculate how much mulch you need.

How Deep Should Mulch Be? What the Extension Services Say

The calculator takes any depth you enter, so use the depth your situation actually calls for. University extension services — the sources landscape professionals cite — are consistent on the main numbers:

SituationRecommended depthSource
New flower and shrub beds, well-drained soil3 to 4 inchesIowa State University Extension
Beds on heavy clay soil2 to 3 inchesIowa State University Extension
Around trees3 to 4 inches, kept at least 6 inches away from the trunkIowa State University Extension
General landscape beds (depth once settled)2 to 3 inchesUniversity of Illinois Extension
Organic mulch (wood and bark)3 to 4 inchesUtah State University Extension
Inorganic mulch (rock and gravel)2 to 3 inchesUtah State University Extension

Deeper is not better: past about 4 inches, mulch can shed rain instead of absorbing it and keep roots short of air and water. If a bed already has mulch on it, you rarely need the full depth again — see topping up, below.

Mulch for Playgrounds: Safety Depths

Playground mulch is a safety surface, not a decoration, and it is installed much deeper than bed mulch. The US Consumer Product Safety Commission (CPSC) publishes minimum loose-fill depths by the fall height of the equipment: engineered wood fiber (EWF) at least 9 inches deep protects at fall heights up to about 7 feet, and 12 inches is needed for higher equipment. Shredded rubber mulch is typically installed 3 to 6 inches deep. Always check the current CPSC handbook against your equipment’s fall height before ordering.

Worked example: a 20 by 20 ft play area at 9 inches deep needs 400 × 9 ÷ 12 = 300 cubic feet, which is 11.1 cubic yards of engineered wood fiber. Loose fill compacts and scatters with use — plan on roughly 25 percent settling, and top up whenever the depth under swings and slide exits drops below the minimum. To run your own play area, enter its size in the calculator above with a depth of 9 or 12 inches.

Topping Up Old Mulch

Most beds do not need a full new layer every year — they need a top-up. Push a ruler or your finger through the mulch to the soil in a few spots and average what is there, then add only the difference up to your target depth of 3 to 4 inches. In the calculator, enter just the depth you are adding.

Worked example: a 20 by 10 ft bed with 2 inches of old mulch, topped up to 4 inches, needs 2 added inches: 200 sq ft × 2 in ÷ 12 = 33.3 cubic feet, which is 1.23 cubic yards — about 1.36 cubic yards with a 10 percent allowance, or 19 bags of 2 cu ft. Before you spread the new layer, rake the old mulch to loosen it. If the old layer is already close to 4 inches, or matted and compacted, pull some out first instead of piling more on, and never pile mulch against a tree trunk.

Quick Answers: Mulch for Common Bed Sizes

At the standard 3 inches deep, before any waste allowance:

Bed sizeAreaCubic yards2 cu ft bags3 cu ft bags
4 × 8 ft32 sq ft0.3043
5 × 10 ft50 sq ft0.4675
10 × 10 ft100 sq ft0.93139
10 × 20 ft200 sq ft1.852517
20 × 20 ft400 sq ft3.705034

Add 5 to 10 percent for settling and uneven beds — the calculator’s waste field does this for you.

How Much Does Mulch Weigh by Type?

Weight decides whether a load fits your truck or trailer, and it varies a lot by material. Typical dry weights for one cubic yard:

Mulch typeTypical dry weight per cubic yard
Pine straw200 to 300 lb (usually sold by the bale)
Pine bark400 to 500 lb
Cedar mulch450 to 600 lb
Bark nuggets500 to 650 lb
Shredded hardwood600 to 800 lb
Rubber mulch1,100 to 1,300 lb

ExactYard’s converters use 800 lb (0.40 tons) per cubic yard as the planning figure for wood mulch, which is the safe end for a vehicle load. Rain-soaked mulch can weigh up to half again as much as the dry figures above, so weigh a delivered load rather than guessing if you are near a vehicle limit. For rubber mulch in detail, use the rubber mulch calculator.

Gear Up for the Job: Our Product Picks

Hand-picked tools and gifts matched to this kind of project, each with honest pros and cons:

Or browse the full shelf: all Product Picks.

Mulch Calculator FAQ

How do I calculate how much mulch I need?

Multiply the length by the width in feet to get square feet, multiply by the depth in inches, divide by 12, then divide by 27 to get cubic yards. Add 5 to 10 percent extra for waste and settling.

How many square feet does a yard of mulch cover?

One cubic yard covers about 324 sq ft at 1 inch deep, 162 sq ft at 2 inches, 108 sq ft at 3 inches, and 81 sq ft at 4 inches.

How many bags of mulch are in a cubic yard?

There are about 13.5 bags of 2 cubic foot mulch, or 9 bags of 3 cubic foot mulch, in one cubic yard. Larger bags mean fewer bags for the same volume.

How deep should mulch be?

Two to three inches is right for most garden beds. Use up to 4 inches for stronger weed control, and avoid going deeper than that.

How much mulch is in a scoop?

It depends on the supplier. A scoop is often about 1 cubic yard, but some are smaller or larger, so confirm with your supplier before ordering.

How much does a yard of mulch weigh?

It varies with the type and moisture, but a cubic yard of mulch commonly weighs between 400 and 800 pounds. Wet mulch is heavier.

Should I add extra mulch?

Yes. An allowance of 5 to 10 percent helps cover uneven areas, settling, spreading and material loss. Round up to the next half or full cubic yard when ordering.

Can I calculate mulch cost?

Yes. Enter a bulk price per cubic yard and/or a bag price in the calculator to see an estimated cost for each option.

What if my area is not a rectangle?

Use the shape selector for a circle or triangle. Irregular areas can also be divided into smaller shapes and calculated separately, then added together.

Can I switch to metric units?

Yes. Use the Metric button at the top of the calculator to enter measurements in meters and depth in centimeters. Results are shown in both cubic yards and cubic meters.

How many bags of mulch are on a pallet?

A full retail pallet usually holds about 60 to 70 bags of 2 cu ft mulch (120 to 140 cubic feet, roughly 4.4 to 5.2 cubic yards) or about 45 bags of 3 cu ft (135 cubic feet, 5 cubic yards). Counts vary by store and brand, so check the pallet wrap before planning a delivery around it.

How much mulch do I need for a playground?

Enough to keep at least 9 inches of loose fill under the equipment at fall heights up to about 7 feet, and 12 inches for higher equipment. A 20 by 20 ft play area at 9 inches needs 300 cubic feet, about 11.1 cubic yards, before settling. Enter your play area and a depth of 9 or 12 inches in the calculator above.

Can I put new mulch over old mulch?

Yes — topping up is the normal way to refresh beds. Rake the old mulch to loosen it, measure its depth, and add only enough new mulch to bring the total to 3 to 4 inches. If the old layer is already near 4 inches or is matted and compacted, pull some out first instead of piling more on.

How much does a bag of mulch weigh?

A 2 cu ft bag of wood mulch usually weighs about 25 to 40 lb depending on the wood and how wet it is, and a 3 cu ft bag runs roughly 35 to 55 lb. Rubber mulch bags are heavier for their size.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators