Start calculating

Deck Calculator

Last reviewed: November 13, 2026. Formulas checked against standard industry conversions. How we calculate.

Quick answer: Count deck boards as deck width divided by board width plus gap. For a 12×12 deck, that is 26 boards to cover the deck, or 29 boards with 10% waste. Plan about 3-4 screws per square foot, with two screws at every joist crossing.

Estimate the decking boards, joists, screws and cost for your deck. Enter your deck size and board type, and get a materials list in seconds.

Boards run along the length. Joists run along the width.

0 sq ft deck
  • Rows of decking–
  • Linear feet (with waste)–
  • Decking boards–
  • Joists–
  • Deck screws–
  • Estimated cost–

Estimate only. Does not include posts, beams, footings, ledger, railing, stairs or hardware.

How to Calculate How Much Decking You Need

  1. Find the area: deck length × deck width in feet.
  2. Find the rows of boards: deck width in inches ÷ (board width + gap), rounded up.
  3. Find the linear feet: rows × deck length.
  4. Add waste: 10% for straight boards, 15% for diagonal patterns.
  5. Find the board count: linear feet ÷ board length, rounded up.
Boards = (rows × length × 1.10) ÷ board length

Example: A 12 × 10 ft deck with 5.5 in boards and a 1/8 in gap has 22 rows. That is 22 × 12 = 264 linear feet, or 290.4 with 10% waste. With 12 ft boards, order 25 boards.

How Many Deck Boards Per 100 Square Feet?

Figures use 5.5 in boards, a 1/8 in gap and 10% waste.

Board lengthBoards per 100 sq ft
8 ft30
10 ft24
12 ft20
16 ft15
20 ft12

Choose a board length that matches your deck length where you can, so you cut fewer boards and make fewer butt joints.

Deck Framing Calculator: How Many Joists?

Joists run across the direction of the boards. Divide the deck length in inches by the spacing, round up, then add one for the last joist.

Joists = (deck length in ÷ spacing) rounded up + 1

Example: A 12 ft long deck with joists 16 in on center: 144 ÷ 16 = 9, plus 1 = 10 joists.

  • 16 in on center is common for wood decking.
  • Some composite decking needs 12 in on center, and diagonal boards usually need 12 in.
  • Joist size and maximum span depend on species, grade and local code, so check your building code and the decking maker’s instructions.

How Many Deck Screws Do I Need?

Use two screws at every point where a board crosses a joist. The calculator multiplies rows × joists × 2, then adds your waste percentage. That works out to about 3-4 screws per square foot.

Deck Cost Estimator

Deck cost depends on material, local labor, design and permits. The calculator multiplies your deck area by the cost per square foot you enter. The material presets are starting points only, so replace them with quotes from your area.

What This Deck Calculator Does Not Include

  • Posts, beams and footings
  • Ledger board and flashing
  • Railings and stairs
  • Picture-frame borders and fascia
  • Permit fees and delivery

Add these to your list separately. Footings often need concrete, so try our concrete calculator. For measuring odd shapes, see how to figure out square feet.

Tips Before You Buy

  • Measure twice and sketch the deck with all dimensions.
  • Add 10% for waste, or 15% for diagonal layouts.
  • Buy a few extra boards, since matching color later can be hard.
  • Check local code and permit rules before you start.

Deck Calculator FAQs

How do I calculate how much decking I need?

Divide the deck width by the board width plus gap to get the rows, multiply by the deck length, add 10% for waste, then divide by the board length.

How many deck boards do I need for a 12×12 deck?

About 29 twelve-foot boards, using 5.5 in boards, a 1/8 in gap and 10% waste.

How many joists do I need for a deck?

Divide the deck length in inches by the spacing, round up, and add one. A 12 ft long deck at 16 in on center needs 10.

How many screws do I need per square foot of decking?

About 3-4 screws per square foot with two screws at each joist.

What is the best joist spacing for a deck?

16 in on center is common. Some composite decking needs 12 in, and diagonal patterns usually need 12 in. Follow the maker’s instructions and local code.

How many screws per deck board?

Use two screws at every joist the board crosses. A 20 ft board on 16 in joist spacing crosses 16 joists, so it needs 32 screws per board. Overall, roughly 350 screws per 100 sq ft is a good ordering guide.

How much gap should be between deck boards?

Aim for about 1/8 to 1/4 in for drainage. Pressure-treated boards shrink as they dry, while composite boards follow the manufacturer’s clip spacing.

How much does a 12×12 deck cost?

At this calculator’s default prices, a 12×12 deck (144 square feet) needs 29 boards of 12 ft, with waste included, and has an estimated cost of $2,880.

How much does a 14×20 deck cost?

At this calculator’s default prices, a 14×20 deck (280 square feet) needs 56 boards of 12 ft, with waste included, and has an estimated cost of $5,600.

How Many Deck Boards Do I Need?

Boards run across the deck width, so the number of boards is the deck width in inches divided by the board width plus the gap: number of boards = deck width (inches) / (board width + gap).

A standard deck board is 5.5 in wide; with a 1/8 in gap each board covers 5.625 in. Worked example: a 12 ft wide deck (144 in) needs 144 / 5.625 = 25.6, so 26 boards, each as long as the deck’s length.

Add 5-10% for cuts and waste (10-15% for diagonal layouts). For a full step-by-step walkthrough, see our detailed guide to how many deck boards you need.

Deck Board Layout Options

Layout changes how much material you need and how closely the joists must be spaced.

LayoutJoist spacingWhat to plan for
Straight / perpendicular16 in on-centerThe simplest layout, with the least waste.
Diagonal12 in on-centerA classic look that needs 10-15% extra material.
Picture frame16 in on-centerA border of contrasting boards around the edge, with more cuts, so plan extra boards.
Herringbone / chevronUsually 12 in on-centerThe most complex layout, with the most waste.

The calculator above handles board counts for any of these layouts if you add the waste allowance.

Deck Screw Calculator




About 350 screws per 100 sq ft of standard decking is a good rule of thumb for ordering.

Deck Stairs Cost Calculator


Typical 2026 US ranges; railings, landings and permits cost extra; check local code for riser and tread rules.

Concrete for Deck Footings

Deck footings are figured like small slabs or piers: measure each footing length, width and depth, multiply them to get cubic feet, then divide by 27 for cubic yards. For a continuous footing trench, use the footing estimator in the Concrete Calculator to work out the total volume. For round piers or sonotubes, size each hole with the Post Hole Calculator and multiply by the number of footings. Add a waste allowance for uneven trenches, and check frost depth and local code before you pour.

How Much Does a Deck Cost by Size?

Installed decks typically run about $25-50 per square foot for pressure-treated wood and $45-80 for composite (typical 2026 US ranges). The figures below come from the calculator above, using 5.5 in boards, a 1/8 in gap, 12 ft boards and 10% waste.

Deck sizeSquare feetBoards to buy (with waste)Estimated cost (at this calculator's default prices)
10x1010021 × 12 ft$2,000
10x1212024 × 12 ft$2,400
12x1214429 × 12 ft$2,880
12x1619239 × 12 ft$3,840
14x2028056 × 12 ft$5,600
16x1625652 × 12 ft$5,120
16x2032064 × 12 ft$6,400
20x2040079 × 12 ft$8,000

Figures come from this calculator at its default price settings; readers can adjust prices in the calculator for their area. Board counts use this calculator's linear-feet method with 12 ft boards.

Deck Material Calculator: What the Materials List Includes

The calculator above outputs a full materials list, not just a board count. It covers deck boards, joists, beams, posts, footing concrete, and screws and fasteners, along with the estimated cost. Use that list as a shopping list: take it to the supplier, check off each item as it is loaded, and keep the board length and screw count together so nothing is missed. For a step-by-step walkthrough of the board count, see our detailed guide to how many deck boards you need.

How do I calculate deck materials?

Measure the deck area, then work out board coverage from the board width plus gap. Add the framing members by span and spacing, count the posts and footings, and then add 10% waste for cuts.

Composite Decking: Counts and Costs

Composite boards use the same coverage math as wood in the calculator above: divide the deck width by the board width plus gap to get the rows, then multiply by the deck length and add waste. You can run the same count for composite by choosing the composite board width and material in the calculator. Installed, composite typically runs $45-80 per square foot, compared with $25-50 per square foot for pressure-treated wood (typical 2026 US ranges).

Composite costs more up front, but it usually lasts longer than wood and needs less routine upkeep. It does not need regular staining or sealing, it resists rot and splinters, and brands such as Trex are made to hold their color better over time. Wood can be cheaper to buy and easier to refinish, but it needs more maintenance to reach a similar lifespan.

Baluster Spacing Calculator

Use the building-code 4-inch sphere rule: the gap between balusters must stay under 4 inches.

Balusters needed:

Actual spacing between balusters:

Balusters are also called spindles. This count is per railing section, not counting posts.

Related calculators

Complete your deck plan with the deck stair calculator, the deck joist calculator, and the deck footing calculator. For the full project cost, including labor, use our deck cost calculator.

Gear Up for the Job: Our Product Picks

Hand-picked tools and gifts matched to this kind of project, each with honest pros and cons:

Or browse the full shelf: all Product Picks.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators