Start calculating

Gravel Prices in 2026: Cost Per Ton, Per Yard & Per Load

Last reviewed: November 2, 2026. Formulas checked against standard industry conversions. How we calculate.

Quick answer: what do gravel prices look like in 2026? Most bulk gravel costs about $30 to $60 per ton, or $30 to $75 per cubic yard, before delivery. Pea gravel usually runs $30 to $60 per yard, crushed stone such as #57 runs $25 to $50 per ton in many regions, and decorative river rock costs more. A delivered dump truck load of 10 to 15 tons commonly lands between $400 and $1,000.

Gravel prices swing a lot depending on the stone, how far the truck has to travel, and how much you order. This guide breaks down current price ranges by type, shows what delivery adds, and walks through real project examples so you can build a realistic budget before you call a supplier.

Heads up: The figures below are typical ranges drawn from published 2026 supplier and cost guides, and the sources do not always agree. Your local quarry or landscape yard sets the real price, so treat these as a planning range and confirm with two or three nearby suppliers.

Gravel Prices by Type (Per Ton and Per Cubic Yard)

Gravel typeTypical sizePrice per tonPrice per cubic yardBest for
Pea gravel1/8″ to 3/8″$30–55$30–60Paths, patios, play areas, pavers
#57 stone (crushed)about 3/4″$25–50$30–75Drainage, driveways, base layers
Crusher run3/4″ minus, with fines$20–40$25–55Driveway and paver base
River rock1″ to 3″+$45–100+$45–100Decorative beds, dry creek beds
Recycled concretevaries$12–25about $15–35Budget base and fill

Prices are for material only and exclude delivery. Premium products, such as washed stone with consistent sizing and little dust, cost more than standard construction-grade material.

Pea gravel prices

Pea gravel is small, rounded stone that is comfortable to walk on and easy to spread. Expect roughly $30 to $55 per ton or $30 to $60 per cubic yard. That is why searches for pea gravel price per yard and pea gravel cost per yard land in the same range. One cubic yard of pea gravel weighs around 1.3 tons, or about 2,600 pounds, so a single yard is a heavy load for a pickup.

How much is a ton of #57 gravel?

A ton of #57 stone typically costs $20 to $45 at many quarries, though some regions and premium products run higher. It is the go-to choice for French drains, driveway bases, and under concrete.

Gravel Sizes Guide (With Photo Ideas)

Size changes both the look and the job a stone can do. Use this quick reference when you compare quotes, and add a photo of each type under its row on your page for the image-pack searches.

NameApprox. sizeLook and feelCommon use
Pea gravel1/8″–3/8″Small, smooth, roundedWalkways, play areas
#8 stoneabout 3/8″–1/2″Small, angularPaver bedding, concrete mixes
#57 stoneabout 3/4″Clean, angularDrainage, driveways
#67 stoneabout 3/4″ downAngular with some finesDriveways, base
Crusher run3/4″ and smallerPacks tight, dustyCompacted base layers
River rock1″–3″+Large, smooth, colorfulDecorative landscaping

Cost of Gravel Delivered: Truckload Prices

Most buyers order delivered gravel by the truckload. Smaller loads usually cost more per ton, because the fixed cost of the truck and driver is spread across less material.

Truck typeTypical loadTypical delivered cost
Single-axle dump truck5–7 tons$200–500
Standard dump truck10–15 tons$400–1,000
Tri-axle or quad-axle truck18–22 tons$600–1,200

What gravel delivery adds to the price

  • Base delivery fee: often $50 to $150, depending on the supplier.
  • Distance charge: commonly $2 to $5 per mile past the free zone, or about $10 to $25 per ton.
  • Minimum order: many yards waive or reduce delivery above a set tonnage within a short radius, so ask about their threshold.
  • Wait time: if the driver has to wait while you clear the area, some suppliers add $50 to $100 per hour.
  • Spreading or grading: if you hire it out, expect an extra few dollars per yard.

Gravel Prices by Region

Distance from the quarry is the biggest driver of price. As a rough guide from regional pricing guides, gravel runs about $25 to $50 per ton in parts of the Southeast, around $35 to $65 in many Northeast markets, and often $55 to $85 in California. If you live far from a source, transport can add $20 to $40 per ton on its own.

How Much Gravel Do You Need?

Suppliers sell by the cubic yard or by the ton, so convert your project to both before you compare prices.

  1. Cubic yards: Length (ft) × Width (ft) × Depth (in) ÷ 324
  2. Tons: Cubic yards × about 1.4 (use roughly 1.3 for pea gravel and 1.5 for crushed stone)
  3. Add 10 to 15% extra for settling and uneven ground.
DepthArea covered by 1 cubic yardArea covered by 1 ton (at about 1.4 tons per yard)
2 inches162 sq ftabout 116 sq ft
3 inches108 sq ftabout 77 sq ft
4 inches81 sq ftabout 58 sq ft

Want the full walkthrough? Read our guide on how much gravel you need.

Gravel Cost Examples for Common Projects

ProjectMaterial neededMaterial cost estimate
100 sq ft pea gravel path, 3″ deep0.93 cu yd, about 1.2 tonsabout $36–66 + delivery
20 × 20 ft patio base, 4″ deep4.94 cu yd, about 6.9 tonsabout $173–345 + delivery
12 × 40 ft driveway, 4″ deep5.93 cu yd, about 8.3 tonsabout $207–415 + delivery

These examples use the price ranges above: $30 to $55 per ton for pea gravel and $25 to $50 per ton for crushed stone. Add a delivery fee of roughly $50 to $150 and a 10% buffer for your final budget.

Gravel Prices Near You: How to Get the Best Quote

Search results for gravel near me prices and gravel delivered near me prices are local, so a few phone calls beat any national average. Use this checklist:

  1. Call at least three suppliers and give each the same material, quantity, and delivery address.
  2. Ask for the price per ton and per yard, and whether delivery is included.
  3. Ask about minimums, free-delivery distance, and wait-time charges.
  4. Check the truck size and your driveway access so the load can be dumped where you need it.
  5. Compare delivered cost per ton, not just the sticker price.

Ordering pea gravel specifically? See our page on a truckload of pea gravel near me.

How to Save Money on Bulk Gravel

  • Buy in bulk. Orders of around 10 tons or more often cut the per-ton cost by 15 to 25% compared with small orders.
  • Share a delivery with a neighbor and split the delivery fee.
  • Choose the right stone. Use crusher run or recycled concrete for hidden base layers and save pea gravel or river rock for the surface.
  • Order from a nearby quarry to cut transport charges.
  • Measure twice. Ordering exactly what you need avoids a second delivery fee.

Bagged Gravel vs. Bulk Gravel

Bagged gravel is easy to carry and fine for a small planter or a few square feet. Bulk gravel nearly always costs less per cubic foot once you need a yard or more, but you must pay for delivery and have somewhere to dump the pile. Since one cubic yard equals 27 cubic feet, divide the bulk price per yard by 27 and compare it with the bag price divided by the bag volume.

Planning your project? Measure your area, pick your depth, and use the guide on how much gravel do I need to get your quantity before you request quotes.

Frequently Asked Questions About Gravel Prices

How much does gravel cost per ton?

Most gravel costs about $30 to $60 per ton in 2026, although cheaper recycled materials can be near $12 to $25 and premium river rock can exceed $100.

How much does pea gravel cost per yard?

Pea gravel usually costs about $30 to $60 per cubic yard before delivery. Price varies by region and by how clean and uniform the stone is.

How much does a ton of pea gravel cost?

Expect roughly $30 to $55 per ton for pea gravel at most suppliers.

How much is a ton of 57 gravel?

A ton of #57 stone typically runs $20 to $45, with higher prices in regions far from a quarry.

How much does a dump truck load of gravel cost?

A standard 10 to 15 ton load commonly costs $400 to $1,000 delivered. Larger 18 to 22 ton loads run about $600 to $1,200, and single-axle loads of 5 to 7 tons cost about $200 to $500.

How much does gravel delivery cost?

Delivery usually adds a base fee of $50 to $150 plus about $2 to $5 per mile, or roughly $10 to $25 per ton.

How much area does a cubic yard of gravel cover?

One cubic yard covers about 162 square feet at 2 inches deep, 108 square feet at 3 inches, and 81 square feet at 4 inches.

How much does a cubic yard of gravel weigh?

Most gravel weighs between 1.2 and 1.7 tons per cubic yard. Pea gravel is on the lighter end at about 1.3 tons, and denser crushed stone and river rock are heavier.

What is the cheapest gravel?

Recycled concrete and crusher run are usually the cheapest options, which makes them a smart choice for base layers under a finished surface.

Final Thoughts

For most projects, plan on about $30 to $60 per ton or yard for common gravel, then add delivery. Get quotes from several nearby suppliers, calculate your quantity in both yards and tons, and order a little extra. Start with our gravel quantity guide to size your order, then use the price ranges above to estimate your total.

Related calculators

Estimate your project with the gravel calculator, and compare landscaping material prices by state.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators