Last reviewed: November 2, 2026. Formulas checked against standard industry conversions. How we calculate.
Quick answer: A 12×12 deck on two beams with posts every 6 feet needs 6 footings. At 12 inches wide and 36 inches deep, each footing takes about 2.36 cubic feet of concrete — roughly 4 bags of 80-lb mix.
Deck Footing Calculator
Enter your measurements below. Results update when you change a value, or press Calculate.
Posts per beam row: 3
Footings needed: 6
Concrete per footing: 2.36 cu ft
80-lb bags per footing: 4
Total concrete: 14.14 cu ft (0.52 yd³)
Total 80-lb bags: 24
Estimates are for planning. Check local code before building.
How the Deck Footing Calculator Works
Deck footings carry the deck posts down to solid, stable ground. This calculator works out how many footings you need and how much concrete each one takes, treating each footing as a cylinder.
- Divide the deck length by the post spacing, round up to the next whole number, and add 1. That gives posts per beam row: ceil(deck length / post spacing) + 1.
- Multiply posts per row by the number of beam rows. That gives total footings.
- Work out the cylinder volume for one footing: pi times (diameter / 2) squared times depth, in cubic inches, divided by 1728 to get cubic feet.
- Divide the per-footing cubic feet by 0.60, the yield of one 80-lb bag, and round up. That gives 80-lb bags per footing.
- Multiply the per-footing volume by the number of footings for total cubic feet, divide by 27 for cubic yards, and divide the total cubic feet by 0.60 and round up for total bags. Totals are computed from unrounded volumes.
How Deep Should Deck Footings Be?
The bottom of the footing should be below the local frost line, so frost heave does not lift the deck. Frost depth varies by location, so check local code for the required footing depth in your area before you dig. The 36-inch depth in the example above is a common planning figure, not a universal requirement.
Worked Example: A 12x12 Deck on Two Beams
Deck length 12 feet, post spacing 6 feet, 2 beam rows, footing diameter 12 inches, footing depth 36 inches. Posts per row are 12 divided by 6, which is 2, plus 1, giving 3 posts per row. Total footings are 3 times 2, giving 6 footings. Each footing is pi times 6 squared times 36, divided by 1728, which is 2.36 cubic feet, or 4 bags of 80-lb mix when rounded up. In total, that is 14.14 cubic feet, which is 0.52 cubic yards, and 24 bags of 80-lb mix.
Planning the framing? Use our Deck Joist Calculator for joist count and span, and our Deck Calculator for boards and cost. For a single hole, see our Post Hole Concrete Calculator.
Frequently Asked Questions
How deep should deck footings be?
The bottom of a deck footing should be below the local frost line. Because frost depth varies by location, check local code for the required depth in your area before you dig.
How many footings do I need for a 12x12 deck?
In the layout used here, a 12x12 deck on two beams with posts every 6 feet needs 6 footings: 3 posts per beam row times 2 beam rows.
How much concrete do I need per footing?
At 12 inches wide and 36 inches deep, each footing takes about 2.36 cubic feet of concrete, which is roughly 4 bags of 80-lb mix. Larger or deeper footings take more; use the calculator above for your own diameter and depth.
How far apart should deck posts be?
Post spacing sets how many footings you need and how far each beam must span. Six feet is a common planning spacing, used in the example above, but the right spacing depends on the beam size and local code, so check both before you build.
Deck blocks vs. poured footings: which is better?
Deck blocks sit on the ground surface, so they are quick to place, but they do not extend below the frost line and are not accepted everywhere. Poured footings extend below the frost line and give a stronger, more stable base, and are the usual choice where frost heave or local code requires a buried footing.
Related Calculators
Related calculators
For steps to your deck, try the deck stair calculator.