Last reviewed: November 19, 2026. Formulas checked against standard industry conversions. How we calculate.
Artificial Turf Calculator
Use this free artificial turf calculator to work out how much turf, infill and base you need for your lawn — strips off a 15 ft roll, seams and trim, silica-sand infill bags and compacted base tons. Enter the lawn length and width, and the calculator does the rest.
Artificial Turf Calculator
Enter your lawn size to estimate turf strips, linear feet of roll, infill bags and compacted base.
Strips run along the length, so the width decides how many strips you need off the roll.
Turf to order includes the waste allowance. Infill is worked out on the actual lawn area. Base is a compacted 3 in layer at 1.4 tons per cubic yard unless you change it. Bags are rounded up to whole bags.
How the Artificial Turf Calculator Works
Artificial turf comes off a roll, usually 15 ft wide, so the calculator first works out how many strips you need: strips = lawn width / roll width, rounded up. Strips run along the lawn length. Linear feet of roll = strips x lawn length, and turf square feet = strips x roll width x lawn length. The calculator then adds your waste allowance — 5% by default — to give the turf to order, and works out the seams (strips - 1) and the trim left over. Infill is 2 lb per sq ft of actual lawn area, and the compacted base is 3 in deep at 1.4 tons per cubic yard.
Worked example: A 20 x 30 ft lawn is 600 sq ft. With a 15 ft roll it needs 2 strips, 40 linear ft of roll and 600 sq ft of turf — 630 sq ft to order with a 5% waste allowance — with 1 seam. Infill is 600 x 2 = 1,200 lb, or 24 x 50-lb bags. The 3 in base is 150.00 cu ft = 5.56 cu yd = 7.78 tons.
Artificial Turf Strips Off a 15 ft Roll
How many strips you need depends only on the lawn width measured across the roll. A lawn up to 15 ft wide needs a single strip and has no seams at all.
| Lawn width | Strips needed | Seams |
|---|---|---|
| Up to 15 ft | 1 | 0 |
| 15–30 ft | 2 | 1 |
| 30–45 ft | 3 | 2 |
| 45–60 ft | 4 | 3 |
Artificial Turf Coverage, Infill and Base
These examples use a 15 ft roll, 2 lb of infill per sq ft, 50-lb infill bags, a 3 in base at 1.4 tons per cubic yard and a 5% waste allowance — the calculator's defaults.
| Lawn | Strips | Linear ft | Turf to order | Seams | Infill bags | Base tons |
|---|---|---|---|---|---|---|
| 12 x 12 ft (144 sq ft) | 1 | 12 | 189.00 sq ft | 0 | 6 | 1.87 |
| 20 x 30 ft (600 sq ft) | 2 | 40 | 630.00 sq ft | 1 | 24 | 7.78 |
| 25 x 40 ft (1,000 sq ft) | 3 | 75 | 1,181.25 sq ft | 2 | 40 | 12.96 |
Seams and Trim
Every strip after the first adds one seam, so a lawn that needs 2 strips has 1 seam and a lawn that needs 3 strips has 2. Plan the layout so seams fall where they are least visible — away from the main viewpoint and running the same way as the longest edge. Trim is the turf left over when the roll is wider than the lawn: a 12 x 12 ft lawn cut from a 15 ft roll leaves a 3 ft wide offcut along the full length (36 sq ft), which is often enough to cover a small side strip or a step. Keep the pile direction the same on every strip or the seams will show as a change in shade.
Silica Sand Infill and Compacted Base
Infill: Silica sand is brushed into the turf to hold the blades upright and weigh the turf down. The usual rate is 2 lb per sq ft, so every 100 sq ft of lawn needs 200 lb of infill — four 50-lb bags. The calculator works infill out on the actual lawn area, not the turf ordered, so you do not pay for infill to cover offcuts.
Base: Turf needs a firm, free-draining base — usually 3 in of compacted crushed stone or decomposed granite at 1.4 tons per cubic yard. Every 100 sq ft of lawn at 3 in deep needs 25 cu ft (0.93 cu yd) of base, or 1.30 tons. Excavate the old lawn, lay the base, compact it, and check the level before the turf goes down; a soft or uneven base is the most common reason a new turf lawn feels lumpy.
Related Calculators
Artificial Turf Calculator FAQs
How many strips of artificial turf do I need for a 20x30 lawn?
A 20 x 30 ft lawn needs 2 strips off a 15 ft roll — 40 linear ft of roll and 600 sq ft of turf, or 630 sq ft to order with a 5% waste allowance — with 1 seam.
How much infill do I need for artificial turf?
Allow 2 lb of silica sand per sq ft. A 600 sq ft lawn needs 1,200 lb of infill, or 24 x 50-lb bags. Work infill out on the actual lawn area, not the turf ordered.
How deep should the base be under artificial turf?
Use 3 in of compacted base under artificial turf — usually crushed stone or decomposed granite at 1.4 tons per cubic yard. Every 100 sq ft at 3 in deep needs 25 cu ft (0.93 cu yd) of base, or 1.30 tons.
How much artificial turf do I need for a 12x12 area?
A 12 x 12 ft lawn needs 1 strip off a 15 ft roll — 15 x 12 ft, or 180 sq ft of turf, with 36 sq ft of trim. Infill is 288 lb, or 6 x 50-lb bags, and the 3 in base is 36 cu ft = 1.33 cu yd = 1.87 tons.
Which way should turf strips run?
Run all strips in the same direction, along the longest side of the lawn where possible, so you have fewer seams and they are less visible. Keep the pile direction the same on every strip, or the seams will show as a change in shade.
How much does artificial turf cost?
Artificial turf prices vary widely by product quality and pile height. Enter your supplier's price per sq ft in the calculator and it will estimate the turf cost on the amount to order, including the waste allowance. Remember to budget separately for infill, base material and edging.