Last reviewed: November 14, 2026. Formulas checked against standard industry conversions. How we calculate.
For a typical wall, start with 10% waste on top of the exact brick count. A 20 ft by 4 ft wall built with modular bricks needs 549 bricks before waste, so buy 604 bricks and about 18 bags of 80 lb mortar. Use the Brick Calculator to run your own wall size, brick type and waste allowance in seconds.
How Many Bricks Do You Need?
Multiply the wall length by the wall height to get the area in square feet. Multiply that area by the bricks-per-square-foot rate for your brick type, rounding up. Then add waste and round up again. The result is the number to buy. For patios laid flat, the same area method works, but check whether your patio pattern uses a different rate or a sand bed instead of mortar.
Rates used here: Modular 6.86 bricks per sq ft, Standard 6.55 per sq ft, King 4.80 per sq ft, including a standard mortar joint. Mortar is estimated at one 80 lb bag per 35 bricks.
Worked Examples
20 ft by 4 ft wall, Modular bricks, 10% waste
Area = 20 x 4 = 80 sq ft. Bricks needed = ceil(80 x 6.86) = 549 bricks. Bricks to buy = ceil(549 x 1.10) = 604 bricks. Mortar bags = ceil(604 / 35) = 18 bags.
10 ft by 8 ft wall, Standard bricks, 10% waste
Area = 10 x 8 = 80 sq ft. Bricks needed = ceil(80 x 6.55) = 524 bricks. Bricks to buy = ceil(524 x 1.10) = 577 bricks. Mortar bags = ceil(577 / 35) = 17 bags.
Brick Counts by Wall Size
| Wall size | Area | Brick type | Bricks to buy (10% waste) | Mortar bags |
|---|---|---|---|---|
| 20 x 4 ft | 80 sq ft | Modular | 604 | 18 |
| 10 x 8 ft | 80 sq ft | Standard | 577 | 17 |
| 10 x 10 ft | 100 sq ft | Modular | 755 | 22 |
| 10 x 10 ft | 100 sq ft | King | 528 | 16 |
Walls vs. Patios
For a wall, remember to think about corners, piers and openings. A simple straight wall needs less waste than a wall with many corners or a curved section. For a patio, bricks are often laid flat, so the coverage rate can differ from a wall built with bricks on edge. If your patio uses a different laying pattern, measure a test square first, then scale up from that count.
How Much Waste Should You Add?
Allow 10% for most walls to cover cuts, breakage and spares. Use 15% for walls with many openings, corners or curved sections. Use 5% only for a simple, straight wall with few cuts. It is cheaper to have a few spare bricks than to run out mid-wall and find the next batch does not match in color.
Frequently Asked Questions
How many bricks do I need for a 20 ft by 4 ft wall?
With modular bricks and 10% waste, buy 604 bricks and about 18 bags of 80 lb mortar.
How many bricks are in a square foot of wall?
About 6.86 modular bricks, 6.55 standard bricks, or 4.80 king bricks per square foot, including mortar joints.
How much mortar do I need?
Allow one 80 lb bag per 35 bricks as a planning estimate. For 604 bricks, that is 18 bags.
For block walls, see the Retaining Wall Block Calculator. To calculate your exact wall, use the Brick Calculator.