Last reviewed: November 2, 2026. Formulas checked against standard industry conversions. How we calculate.
Cubic Yards to Tons Calculator
To convert cubic yards to tons, multiply the cubic yards by the material’s tons per cubic yard. For typical gravel at about 1.4 tons per cubic yard, 5 cubic yards weighs about 7 US short tons. Use the free calculator below for gravel, sand, soil, mulch, concrete and more, and convert in both directions, including metric tonnes.
- 1 yd³ = 27 ft³
- 1 yd³ gravel ≈ 1.4 tons
- 1 ton gravel ≈ 0.71 yd³
- 1 yd³ = 0.765 m³
Estimates vary by grading, moisture and supplier. Use your supplier’s value if you have it.
5 cubic yards × 1.4 tons per cubic yard = 7 US short tons.
Estimates only. Confirm the actual density and quantity with your supplier before ordering.
Quick answers
On this page
How to Convert Cubic Yards to Tons
To convert cubic yards to tons, multiply the volume in cubic yards by the material’s weight per cubic yard.
Formula
Tons = Cubic yards × Tons per cubic yardExample: 5 cubic yards of gravel at 1.4 tons per cubic yard: 5 × 1.4 = 7 US short tons
This is an estimate. The exact weight depends on the material’s density and moisture content.
Cubic yards to tons chart by material
| Material (tons per yd³) | 1 cubic yard | 5 cubic yards | 10 cubic yards |
|---|---|---|---|
| Gravel (1.4) | 1.4 tons | 7 tons | 14 tons |
| Pea gravel (1.35) | 1.35 tons | 6.75 tons | 13.5 tons |
| Sand (1.4) | 1.4 tons | 7 tons | 14 tons |
| Fill dirt (1.25) | 1.25 tons | 6.25 tons | 12.5 tons |
| Topsoil (1.1) | 1.1 tons | 5.5 tons | 11 tons |
| Concrete (2.0) | 2 tons | 10 tons | 20 tons |
| Mulch (0.4) | 0.4 tons | 2 tons | 4 tons |
How to Convert Tons to Cubic Yards
To convert tons back into cubic yards, divide the weight in tons by the material’s tons-per-cubic-yard value. This is the calculation behind “convert tons to cubic yards”.
Formula
Cubic yards = Tons ÷ Tons per cubic yardExample: a gravel delivery weighs 8 tons at 1.4 tons per cubic yard: 8 ÷ 1.4 = 5.71 cubic yards
Tons to cubic yards chart (gravel at 1.4 tons per yd³)
| US short tons | Cubic yards |
|---|---|
| 1 ton | 0.71 yd³ |
| 2 tons | 1.43 yd³ |
| 3 tons | 2.14 yd³ |
| 5 tons | 3.57 yd³ |
| 10 tons | 7.14 yd³ |
| 15 tons | 10.71 yd³ |
| 20 tons | 14.29 yd³ |
Estimated Tons per Cubic Yard by Material
These values are illustrative starting points for planning. They are not universal conversion factors, and actual weights can fall outside these ranges.
| Material | Illustrative tons per cubic yard | What affects weight? |
|---|---|---|
| Common gravel | 1.3–1.5 | Stone type, grading, moisture |
| Crushed stone | 1.3–1.6 | Rock type and particle sizes |
| Pea gravel | 1.2–1.5 | Stone composition and moisture |
| River rock | 1.2–1.6 | Rock type and size |
| Sand | 1.2–1.6 | Grain size and moisture |
| Topsoil | 0.8–1.4 | Organic matter and water content |
| Fill dirt | 1.0–1.5 | Soil composition and moisture |
| Mulch | 0.2–0.6 | Wood type, particle size, moisture |
| Concrete (ready-mix) | about 2.0 | Mix design and aggregate |
Mulch and soil are especially variable. If your project involves hauling, equipment limits or a paid bulk delivery, ask the supplier for the material’s estimated weight per cubic yard.
How many tons are in 1 cubic yard of gravel?
One cubic yard of common gravel may weigh around 1.3 to 1.5 US short tons, depending on the stone and its moisture content. At an example density of 1.4 tons per cubic yard, one cubic yard weighs about 2,800 pounds. The same range answers how much a cubic yard of stone weighs, including crushed stone and river rock. For pea gravel specifically, see how much a yard of pea gravel weighs.
Figuring Tons of Gravel, Dirt and Soil: How to Measure
To figure tons of gravel, or to work out cubic yards of dirt or soil, find the volume of your area first, then convert to tons. The method is the same for every bulk material.
- Measure length and widthIn feet. Split irregular areas into rectangles and add them up.
- Choose a depthConvert inches to feet by dividing by 12 (4 inches = 0.333 ft)
- Calculate cubic feetLength × Width × Depth
- Convert to cubic yardsCubic feet ÷ 27
- Convert to tonsCubic yards × tons per cubic yard
- Depth: 4 ÷ 12 = 0.333 feet
- Volume: 20 × 10 × 0.333 = 66.67 cubic feet
- Cubic yards: 66.67 ÷ 27 = 2.47 cubic yards
- Gravel at 1.4 tons per yd³: about 3.46 tons
The same 2.47 cubic yards weighs different amounts for different materials:
| Material | Approx. weight of 2.47 cubic yards |
|---|---|
| Gravel (1.4) | 3.46 tons |
| Pea gravel (1.35) | 3.33 tons |
| Fill dirt (1.25) | 3.09 tons |
| Topsoil (1.1) | 2.72 tons |
| Concrete (2.0) | 4.94 tons |
| Mulch (0.4) | 0.99 tons |
For gravel projects, try the ExactYard Gravel Calculator, or the Rock Calculator if you are estimating landscape stone in yards and tons. For other outdoor projects, visit the ExactYard Calculator Directory.
How many cubic feet are in a cubic yard of soil, dirt or mulch?
One cubic yard equals exactly 27 cubic feet for any material, including soil, dirt, mulch and gravel. Only the weight changes by material, not the volume.
| Cubic yards | Cubic feet |
|---|---|
| 1 | 27 |
| 2 | 54 |
| 3 | 81 |
| 5 | 135 |
| 10 | 270 |
How Much Area Does a Yard of Gravel, Mulch or Soil Cover?
Divide 324 by the depth in inches to find the square feet that one cubic yard covers on level ground. This works for gravel, mulch, soil and any other loose material.
| Depth | Coverage per cubic yard | Coverage per ton of gravel (1.4 tons/yd³) |
|---|---|---|
| 1 inch | 324 sq ft | 231 sq ft |
| 2 inches | 162 sq ft | 116 sq ft |
| 3 inches | 108 sq ft | 77 sq ft |
| 4 inches | 81 sq ft | 58 sq ft |
| 6 inches | 54 sq ft | 39 sq ft |
A yard of mulch at 3 inches deep covers about 108 square feet. One ton of gravel covers roughly 77 square feet at 3 inches. These are volume-based estimates, and real coverage depends on the ground and installation.
How many square feet in a square yard?
There are 9 square feet in a square yard (3 ft × 3 ft). Divide square feet by 9 to get square yards. A square yard is area only, so you also need a depth to turn it into cubic yards.
Gravel sizes chart
Gravel size affects how it is used, but weight per cubic yard stays in a similar range for many common products. Sizes below are approximate and vary by supplier.
| Approximate size | Typical product | Common use |
|---|---|---|
| 1/8–3/8 inch | Pea gravel | Garden beds, decorative paths |
| 3/8–3/4 inch | Small crushed stone | Landscaping, some surfaces |
| 1/2–1 1/2 inches | Coarser screened stone | Drainage, aggregate |
| Mixed, with fines | Road base, crusher run | Compacted bases |
Learn more in our guide to the types of gravel.
Cubic Yards to Cubic Meters and Metric Tonnes
Cubic yard to cubic meter conversion
One cubic yard equals about 0.7646 cubic meters. To convert cubic yards to cubic meters, multiply by 0.7646. To go the other way, multiply cubic meters by 1.308.
| Cubic yards | Cubic meters |
|---|---|
| 1 yd³ | 0.765 m³ |
| 2 yd³ | 1.529 m³ |
| 5 yd³ | 3.823 m³ |
| 10 yd³ | 7.646 m³ |
| 1 m³ | 1.308 yd³ |
How many cubic yards are in a tonne?
A metric tonne is 1,000 kilograms, or about 1.102 US short tons. Divide that by the material’s tons per cubic yard. At 1.4 US tons per cubic yard, one tonne is about 0.79 cubic yards, and one cubic yard weighs about 1.27 tonnes. The calculator above can convert cubic yards to tonnes and tonnes to cubic yards directly.
| Unit | Equivalent weight |
|---|---|
| 1 US short ton | 2,000 lb |
| 1 metric tonne | 2,204.62 lb |
| 1 US short ton | about 0.907 metric tonnes |
| 1 metric tonne | about 1.102 US short tons |
Check which unit your supplier uses before comparing weights or delivery quantities.
Cubic Yards of Concrete: Weight and Bags
Ready-mixed concrete weighs about 4,000 pounds per cubic yard, or roughly 2 US short tons. For a slab estimate, multiply length × width × thickness (in feet) and divide by 27 to get cubic yards, then add 5 to 10 percent for waste.
For bagged concrete, one cubic yard is about 45 bags of 80 lb mix or 60 bags of 60 lb mix, based on typical yields of 0.6 and 0.45 cubic feet per bag. Yields vary by brand. See the full guide on how to estimate concrete yards for a slab estimator, footing examples and bag charts.
Soil volume for pots and planters
For a round pot, volume = π × radius² × depth. A pot 12 inches across and 10 inches deep holds π × 6 × 6 × 10 ≈ 1,131 cubic inches, or about 0.65 cubic feet (1 cubic foot = 1,728 cubic inches). Divide the total cubic feet by 27 to see what fraction of a cubic yard of soil that is.
Frequently Asked Questions
How many tons are in a cubic yard?
It depends on the material. A cubic yard of common gravel may weigh around 1.3 to 1.5 US short tons, while mulch and soil can have substantially different weights. Use the supplier’s density when possible.
How do I convert cubic yards to tons?
Multiply cubic yards by the material’s tons-per-cubic-yard value. For example, 4 cubic yards at 1.4 tons per cubic yard equals 5.6 US short tons.
How do I convert tons to cubic yards?
Divide tons by the material’s tons-per-cubic-yard value. For example, 6 tons at 1.5 tons per cubic yard equals 4 cubic yards.
How many cubic yards are in a tonne?
A tonne measures weight and a cubic yard measures volume, so the conversion depends on density. One metric tonne is about 1.102 US short tons. Divide that by the material’s short tons per cubic yard. At 1.4, one tonne is about 0.79 cubic yards.
How many cubic feet are in a cubic yard?
27 cubic feet, for any material including soil, dirt and mulch.
How much does a cubic yard of stone weigh?
Roughly 1.3 to 1.6 US short tons for crushed stone, or about 2,600 to 3,200 pounds, depending on the rock type and particle sizes. Ask your supplier for the exact figure.
How many square feet does a ton of gravel cover?
At about 1.4 tons per cubic yard, one ton covers roughly 116 square feet at 2 inches deep, 77 square feet at 3 inches and 58 square feet at 4 inches.
How much area does a yard of mulch cover?
About 162 square feet at 2 inches deep, 108 square feet at 3 inches and 81 square feet at 4 inches, on level ground.
How many square feet are in a square yard?
9 square feet. Divide square feet by 9 to convert to square yards.
How do I convert cubic yards to cubic meters?
Multiply cubic yards by 0.7646. For example, 10 cubic yards is about 7.65 cubic meters.
How many bags of concrete are in a yard?
About 45 bags of 80 lb mix or 60 bags of 60 lb mix, based on typical yields. Check the bag label because yields vary by brand.
Does wet gravel weigh more than dry gravel?
Yes. Water adds weight to a given volume of gravel. The amount depends on the material and how much moisture it contains.
Can I use the same conversion factor for gravel, dirt and mulch?
No. These materials have very different densities. Select the right material in the calculator or enter a supplier-provided density for a better estimate.
Final Thoughts
Converting cubic yards to tons is simple once you know the material’s density. Multiply volume by tons per cubic yard to estimate weight, or divide weight by density to estimate volume.
For accurate ordering, use material-specific information from your supplier and account for moisture and local product variations. Estimate your gravel requirements with ExactYard.
Square Feet to Tons Calculator
Starting from an area instead of a volume? Enter the area and depth.
Cubic yards: 0.93 | Tons: 1.30
Formula: cubic yards = area x (depth / 12) / 27; tons = cubic yards x density.
How Much Does a Cubic Yard Weigh?
| Material | Weight per cubic yard (lb) | Tons |
|---|---|---|
| Gravel | 2,800 | 1.40 |
| Crushed stone | 2,700 | 1.35 |
| Topsoil | 2,200 | 1.10 |
| Dirt / fill soil | 2,500 | 1.25 |
| Sand | 2,800 | 1.40 |
| Mulch | 800 | 0.40 |
These weights are typical dry weights. Wet material can weigh 10-20% more, and soil weight varies most with moisture.
Square Feet to Tons FAQs
How do you convert square feet to tons?
You cannot convert area directly; you need depth and density: area x depth gives volume, then multiply cubic yards by the material's tons per yard. The calculator above does all three steps.
How much does a cubic yard of soil weigh?
Dry topsoil about 2,200 lb (1.1 tons); wet soil can reach about 2,700 lb or more.
How many square feet are in a ton of gravel?
At 3 in deep, about 77 sq ft per ton for typical gravel at 1.40 t/yd (1 ton = 0.71 cu yd = 19.3 cu ft; 19.3 / 0.25 = 77).
See also the Gravel Tons to Yards Converter and the Gravel Calculator.
How Many Yards in a Ton?
To reverse the conversion, divide 1 by the material density in tons per cubic yard. Yards per ton = 1 divided by density.
| Material | Tons per cubic yard | Yards per ton |
|---|---|---|
| Gravel | 1.4 | 0.71 |
| Sand | 1.4 | 0.71 |
| Fill dirt | 1.25 | 0.80 |
| Topsoil | 1.1 | 0.91 |
| Mulch | 0.4 | 2.50 |
| Concrete | 2.0 | 0.50 |
Related calculators: if your measurements are in feet, the feet to yards converter can help convert lengths first.