Start calculating

Last reviewed: November 19, 2026. Formulas checked against standard industry conversions. How we calculate.

Decomposed Granite Calculator

Use this free decomposed granite calculator to work out how much DG you need for a path, patio or landscape bed — in cubic feet, cubic yards, tons, bags and cost. Enter the length, width and depth, and the calculator applies a 10% waste and compaction allowance on top of the exact amount.

Decomposed Granite Calculator

Enter your measurements to estimate decomposed granite in cubic feet, cubic yards, tons, bags and cost.

Area–
Cubic feet–
Cubic yards–
Tons (exact)–
Tons to buy–
Bags–
Estimated cost–

Tons to buy, bags and cost include the waste and compaction allowance. Bags are rounded up to whole bags. For a circle, enter the diameter.

How the Decomposed Granite Calculator Works

First, the calculator finds the area in square feet: length x width for a rectangle, or pi x (diameter / 2) squared for a circle. Then it works out the volume: cubic feet = area x depth in feet (depth in inches / 12), and cubic yards = cubic feet / 27. Tons = cubic yards x 1.4 tons per cubic yard, the standard density for decomposed granite. Finally it adds your waste and compaction allowance — 10% by default — to give the tons to buy, the number of 0.5 cu ft bags, and the cost at your price per ton.

Worked example: A 10 x 10 ft patio at 3 in deep is 100 sq ft x 0.25 ft = 25.00 cu ft (0.93 cu yd). At 1.4 tons per cubic yard that is 1.30 tons exactly, or 1.43 tons to buy with a 10% allowance — 55 bags of 0.5 cu ft, costing $57.04 at $40 per ton.

Decomposed Granite by Depth: Paths and Patios

Paths and patios usually need 2–4 in of decomposed granite: 2 in for a light footpath, 3 in for a standard patio or walkway, and 4 in where the ground is soft or the path gets heavy use. The table below shows what you need per 100 sq ft at 1.4 tons per cubic yard, with a 10% waste and compaction allowance and 0.5 cu ft bags.

DepthCubic feetCubic yardsTons (exact)Tons to buy (+10%)Bags (0.5 cu ft)
2 in16.670.620.860.9537
3 in25.000.931.301.4355
4 in33.331.231.731.9074

Decomposed Granite Coverage and Cost

These examples use a 3 in depth, 1.4 tons per cubic yard, a 10% allowance and $40 per ton — the calculator's defaults.

AreaCubic feetCubic yardsTons to buyBagsCost
10 x 10 ft (100 sq ft)25.000.931.4355$57.04
10 x 20 ft (200 sq ft)50.001.852.85110$114.07
20 x 30 ft (600 sq ft)150.005.568.56330$342.22

Stabilized vs Loose Decomposed Granite

Loose decomposed granite is just crushed granite fines with nothing added. It is the cheapest option and the easiest to spread and reshape, but it shifts underfoot, washes out in heavy rain and needs regular topping up. Use it for informal garden paths and landscape beds where a natural, soft surface is fine.

Stabilized decomposed granite has a stabilizer mixed in that binds the fines together once it is watered and compacted. It sets into a firmer, longer-lasting surface that resists washout and rutting, so it is the better choice for patios, walkways and paths that get daily use. It costs more per ton and is harder to regrade later, but it needs less maintenance. The amount you need is the same either way — use the calculator above for both.

Compaction: Why to Order 10–15% Extra

Decomposed granite settles and compacts by roughly 10–15% once it is watered and rolled, and a little is always lost to uneven ground, edging and spillage. That is why the calculator adds a 10% waste and compaction allowance by default. Order at the top of the range — 15% — for soft or uneven ground, a first-time install, or a path with no firm edging. Ordering a little extra is far cheaper than a second delivery for one more bag.

Related Calculators

Decomposed Granite Calculator FAQs

How much decomposed granite do I need for a 10x10 patio?

At 3 in deep, a 10 x 10 ft patio needs 25.00 cu ft (0.93 cu yd) of decomposed granite — 1.30 tons exactly, or 1.43 tons to buy with a 10% allowance. That is 55 bags of 0.5 cu ft, costing $57.04 at $40 per ton.

How many tons is a cubic yard of decomposed granite?

One cubic yard of decomposed granite weighs about 1.4 tons (2,800 lb). The calculator uses 1.4 tons per cubic yard by default; change the density if your supplier quotes a different weight.

How deep should decomposed granite be for a path or patio?

Use 2 in for a light garden path, 3 in for a standard patio or walkway, and 4 in for soft ground or heavy use. Deeper than 4 in is rarely needed and makes the surface soft underfoot.

What is the difference between stabilized and loose decomposed granite?

Loose DG is plain crushed granite fines: cheap and easy to reshape, but it shifts and washes out. Stabilized DG has a binder mixed in that sets into a firm, durable surface for patios and well-used paths. Both need the same amount by volume.

How many bags of decomposed granite do I need?

Divide the cubic feet you need by the bag size. A 0.5 cu ft bag covers 0.5 cu ft, so a 10 x 10 ft patio at 3 in deep needs 55 bags once the 10% allowance is included. The calculator rounds bags up to whole bags.

How much does decomposed granite cost?

Prices vary by region, but $40 per ton is a common figure. At $40 per ton, a 10 x 10 ft patio at 3 in deep costs about $57.04, and a 20 x 30 ft area at 2 in deep costs about $228.15. Enter your supplier's price per ton in the calculator for an exact quote.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators