Last reviewed: November 12, 2026. Formulas checked against standard industry conversions. How we calculate.
Last reviewed: November 12, 2026. Formulas checked against standard industry conversions. How we calculate.
Quick answer: A gravel driveway costs about $3.36 per sq ft installed at 4 in deep — a 20-by-12-foot driveway at 4 inches needs about 4.15 tons of gravel (4.56 tons with 10% waste) and costs about $805 — $205 of gravel at $45 a ton plus $600 of installation at $2.50 a square foot.
Use this free gravel driveway cost calculator to estimate what a new gravel driveway costs. Enter the length and width, the depth, the gravel type, the price per ton and the installation price per square foot, and it gives you the area, the gravel volume, the tons needed, the tons to buy with waste, the truckloads, the material cost, the installation cost, the total cost and the cost per square foot.
Gravel weighs about 1.35 to 1.5 tons per cubic yard depending on stone type, moisture and compaction. Prices vary by region and supplier — get a local quote before ordering.
How the cost is calculated
Work out the volume first, then the tonnage, then price the gravel and the installation separately.
- Area: length x width, in square feet.
- Cubic feet: area x depth in inches / 12.
- Cubic yards: cubic feet / 27.
- Tons: cubic yards x tons per cubic yard for the gravel type. Surface crushed stone weighs about 1.4 tons per cubic yard; base #57 stone and sub-base #3 stone about 1.35.
- Tons to order: tons x (1 + waste %). Allow about 10% extra for uneven subgrade, spreading and compaction.
- Material cost: tons to order x price per ton. In 2026, gravel typically runs $30 to $60 per ton delivered.
- Installation cost: area x installation cost per square foot. Installation, including grading, spreading and compaction, typically runs about $2 to $3 per square foot.
- Total cost: material cost + installation cost.
- Cost per square foot: total cost / area.
Cost by driveway size
At the calculator defaults — surface crushed stone at 1.4 tons per cubic yard, $45 per ton, $2.50 per square foot for installation and 10% waste.
| Driveway size | Depth | Area | Cu yd | Tons | Tons to order | Material | Installation | Total | Per sq ft |
|---|---|---|---|---|---|---|---|---|---|
| 10 x 20 ft | 4 in | 200 sq ft | 2.47 | 3.46 | 3.80 | $171.11 | $500.00 | $671.11 | $3.36 |
| 12 x 25 ft | 4 in | 300 sq ft | 3.70 | 5.19 | 5.70 | $256.67 | $750.00 | $1,006.67 | $3.36 |
| 20 x 20 ft | 4 in | 400 sq ft | 4.94 | 6.91 | 7.60 | $342.22 | $1,000.00 | $1,342.22 | $3.36 |
| 12 x 50 ft | 4 in | 600 sq ft | 7.41 | 10.37 | 11.41 | $513.33 | $1,500.00 | $2,013.33 | $3.36 |
| 12 x 100 ft | 6 in | 1,200 sq ft | 22.22 | 31.11 | 34.22 | $1,540.00 | $3,000.00 | $4,540.00 | $3.78 |
Gravel types and density
Use the right stone for each layer. The density is what turns cubic yards into tons.
| Gravel type | Density | Typical use |
|---|---|---|
| Sub-base #3 stone | 1.35 tons per cu yd | Bottom layer, drainage |
| Base #57 stone | 1.35 tons per cu yd | Middle base layer |
| Surface crushed stone | 1.40 tons per cu yd | Top driving surface |
Published figures for gravel run from about 1.35 to 1.5 tons per cubic yard depending on stone type, moisture and compaction. Use your supplier’s figure when you have it.
What affects the cost
Depth is the biggest driver: doubling the depth roughly doubles the gravel. Grading and excavation add cost when the ground is uneven or an old driveway has to be removed. Access matters too — a narrow or steep site takes longer to spread and compact. Edging keeps the gravel in place, landscape fabric stops weeds and keeps the stone from mixing with the soil below, and delivery distance adds to the per-ton price when the quarry is far away.
Gravel vs asphalt vs concrete
At calculator defaults, a gravel driveway costs about $3.36 per square foot installed, against about $4.71 per square foot for asphalt and about $7.85 per square foot for concrete. Gravel is the cheapest option up front and the easiest to repair — add gravel and re-grade. Asphalt and concrete cost more but need less regular topping up, and they give a hard, sealed surface.
Frequently asked questions
How much does a gravel driveway cost per square foot?
Installed gravel driveways typically cost $3 to $5 per square foot in 2026. At the calculator defaults — 4 inches deep, surface crushed stone at $45 a ton and $2.50 a square foot for installation — the cost is about $3.36 per square foot.
How many tons of gravel do I need for a driveway?
Multiply length by width to get square feet, multiply by depth in inches and divide by 12 for cubic feet, divide by 27 for cubic yards, then multiply by the density of the gravel. A 20-by-12-foot driveway at 4 inches deep needs about 4.15 tons of surface crushed stone — order 4.56 tons with 10% waste.
How deep should a gravel driveway be?
Plan on 4 inches of surface gravel over a compacted base — 6 to 8 inches of stone in total including the base layers. Use the Driveway Gravel Calculator to work out the volume for each layer.
How much does gravel cost per ton?
Gravel typically costs $30 to $60 per ton delivered in 2026, depending on stone type and delivery distance. The calculator uses $45 per ton as the default.
How many truckloads of gravel do I need?
A tri-axle dump truck carries about 14 tons per load. Divide the tons to order by 14 and round up — 4.56 tons is 1 truckload, and 34.22 tons is 3 truckloads.
Is gravel cheaper than asphalt for a driveway?
Yes. A gravel driveway costs about $3.36 per square foot installed at the calculator defaults, against about $4.71 per square foot for asphalt and about $7.85 per square foot for concrete.
Related calculators: Driveway Gravel Calculator · Gravel Calculator · Asphalt Driveway Cost Calculator · Concrete Driveway Cost Calculator