Start calculating

Grout Calculator

Last reviewed: November 15, 2026. Formulas checked against standard industry conversions. How we calculate.

Last reviewed: November 15, 2026. Formulas checked against standard industry conversions. How we calculate.

Quick answer: A 100 sq ft floor of 12×12 in tile with 1/8-in joints needs about 0.04 cu ft of grout — 5.24 lb exact, 5.76 lb with 10% waste — so buy 1 × 10-lb bag.

Use this free grout calculator to work out how much grout you need for a tile floor or wall. Enter the tile area, tile size, joint width and joint depth, and it gives you the grout volume, the exact weight, the weight to buy with waste, and the number of bags.















Grout fills the joints between tiles, so the amount you need depends on how many joints there are and how wide and deep they are. Small tiles have far more joints per square foot than large tiles, which is why a mosaic floor can need three times as much grout as the same area in 12×12 in tile.

How grout is calculated

  1. Joint area per tile: (tile length + joint width) × (tile width + joint width) − tile length × tile width.
  2. Grout volume per tile: joint area × joint depth.
  3. Tiles per sq ft: 144 ÷ (tile length × tile width).
  4. Total cubic inches: tile area × tiles per sq ft × volume per tile.
  5. Cubic feet: total cubic inches ÷ 1,728.
  6. Exact pounds: cubic feet × 120 lb per cu ft.
  7. Pounds to buy: exact pounds × (1 + waste ÷ 100). The default waste allowance is 10%.
  8. Bags to buy: pounds to buy ÷ bag size, rounded up.

Worked examples

Example 1 — a 100 sq ft floor, 12×12 in tile. Tile area 100 sq ft, 12×12 in tile, 1/8-in joint (0.125), 1/4-in depth (0.25). Joint area = (12 + 0.125) × (12 + 0.125) − 12 × 12 = 3.02 sq in. Volume per tile = 3.02 × 0.25 = 0.75 cu in. Tiles per sq ft = 144 ÷ 144 = 1. Total = 100 × 1 × 0.75 = 75.39 cu in = 0.04 cu ft. Exact grout = 0.04 × 120 = 5.24 lb. With 10% waste = 5.76 lb. Buy 1 × 10-lb bag.

Example 2 — a 200 sq ft floor, 6×6 in tile. Tile area 200 sq ft, 6×6 in tile, 1/4-in joint (0.25), 3/8-in depth (0.375). Joint area = (6 + 0.25) × (6 + 0.25) − 6 × 6 = 3.06 sq in. Volume per tile = 3.06 × 0.375 = 1.15 cu in. Tiles per sq ft = 144 ÷ 36 = 4. Total = 200 × 4 × 1.15 = 918.75 cu in = 0.53 cu ft. Exact grout = 0.53 × 120 = 63.80 lb. With 10% waste = 70.18 lb. Buy 3 × 25-lb bags.

Grout coverage table

Exact grout needed per 100 sq ft at a 1/4-in joint depth, before waste. Add 10% for cuts and spares.

Tile size1/8-in joint1/4-in joint3/8-in joint
4×4 in15.87 lb32.23 lb49.07 lb
6×6 in10.52 lb21.27 lb32.23 lb
12×12 in5.24 lb10.52 lb15.87 lb
12×24 in3.92 lb7.87 lb11.84 lb
18×18 in3.48 lb6.99 lb10.52 lb
24×24 in2.61 lb5.24 lb7.87 lb

Sanded vs unsanded grout

Use unsanded grout for joints 1/8 in and under. Unsanded grout is smooth, so it fills narrow joints cleanly and will not scratch polished stone, glass or glazed tile. It is the right choice for walls, backsplashes and most floors with tight joints.

Use sanded grout for joints wider than 1/8 in. The sand gives the grout body, so it resists shrinking and cracking as it cures in a wide joint. Sanded grout is the standard choice for floor tile with 1/4-in or wider joints, and for outdoor work.

As a rule of thumb, if you can fit the edge of a coin in the joint, it is wide enough for sanded grout. Never use sanded grout on polished marble or soft glass tile — the sand can scratch the surface. Epoxy grout is a third option: tougher and stain-proof, but harder to work with and more expensive.

Frequently asked questions

How much grout do I need per square foot?

It depends on tile size and joint width. For 12×12 in tile with 1/8-in joints at 1/4-in depth, allow about 0.05 lb of grout per sq ft before waste. Small tiles need much more: 4×4 in tile with the same joints needs about 0.16 lb per sq ft. Use the calculator above for your exact tile and joint size.

How many bags of grout do I need for 100 sq ft?

For 12×12 in tile with 1/8-in joints and 1/4-in depth, 100 sq ft needs 5.24 lb of grout — 5.76 lb with 10% waste — so one 10-lb bag covers it. For 6×6 in tile with 1/4-in joints, the same 100 sq ft needs about 21.27 lb exact, so buy one 25-lb bag.

Should I use sanded or unsanded grout?

Use unsanded grout for joints 1/8 in and under, and sanded grout for wider joints. Sanded grout resists shrinking and cracking in wide joints; unsanded grout is smooth and will not scratch polished or delicate tile.

How deep should grout joints be?

Grout should fill the joint to nearly the full depth of the tile — about 1/4 in for standard floor tile, and 3/8 to 1/2 in for thick pavers and stone. The calculator defaults to 1/4-in depth; measure your tile thickness if you are unsure.

How much extra grout should I buy?

Allow 10% extra for most jobs to cover spills, overfilling and spares. Use 15% for diagonal layouts, mosaics and first-time DIY jobs, where waste runs higher.

How much grout is in a bag?

Grout is usually sold in 10-lb and 25-lb bags. A 25-lb bag covers about 100 sq ft of 12×12 in tile with 1/8-in joints, or about 50 sq ft of 6×6 in tile with 1/4-in joints. Check the bag label — coverage varies by brand and joint size.

Related calculators: Tile Calculator · Thinset Calculator

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators