Last reviewed: November 20, 2026. Formulas checked against standard industry conversions. How we calculate.
Landscape Edging Calculator
Use this free landscape edging calculator to work out how much edging you need for a garden bed: measure the perimeter, add 5% waste for a straight run or 10% for a curved run, then count sections, stakes and connectors. A 20 × 10 ft rectangular bed has a 60 ft perimeter and needs 63 ft of edging — 16 × 4-ft sections, 20 stakes and 16 connectors.
Landscape Edging Calculator
Enter your bed shape and size to work out the perimeter, the edging to order, and how many sections, stakes and connectors to buy.
Stakes are spaced every 3 ft around the bed. Edging to order includes the waste allowance. Connectors: one per joint, so one per section.
How the Landscape Edging Calculator Works
Edging is sold by the linear foot, in sections of a fixed length, so the calculator works in three steps. First it finds the perimeter of the bed: 2 × (length + width) for a rectangle, π × diameter for a circle, or the perimeter you measured yourself. Then it adds waste — 5% for a straight run, 10% for a curved run — because cuts, bends and joins use up edging. Then it divides the edging to order by the section length and rounds up, counts one stake every 3 ft, and counts one connector per section, since every section needs a joint to the next one.
Worked Examples
Worked example — rectangular bed: A 20 × 10 ft bed has a perimeter of 2 × (20 + 10) = 60 ft. On a straight run, add 5% waste: 60 × 1.05 = 63 ft to order. With 4-ft sections, buy 63 ÷ 4 = 15.75, rounded up to 16 sections. Stakes: 60 ÷ 3 = 20 stakes. Connectors: one per section, so 16 connectors.
Worked example — round bed: A 12-ft diameter round bed has a perimeter of π × 12 = 37.70 ft. On a curved run, add 10% waste: 37.70 × 1.10 = 41.47 ft to order. With 8-ft sections, buy 41.47 ÷ 8 = 5.18, rounded up to 6 sections. Stakes: 37.70 ÷ 3 = 12.57, rounded up to 13 stakes. Connectors: 6.
Landscape Edging by Bed Size
These examples use the waste allowance for the run type shown. Round numbers up when you buy — you cannot buy part of a section or part of a stake.
| Bed size | Perimeter | Edging to order | Sections | Stakes | Connectors |
|---|---|---|---|---|---|
| 10 × 10 ft bed, straight, 4-ft sections | 40.00 ft | 42.00 ft | 11 | 14 | 11 |
| 20 × 10 ft bed, straight, 4-ft sections | 60.00 ft | 63.00 ft | 16 | 20 | 16 |
| 30 × 15 ft bed, straight, 6-ft sections | 90.00 ft | 94.50 ft | 16 | 30 | 16 |
| 12-ft round bed, curved, 8-ft sections | 37.70 ft | 41.47 ft | 6 | 13 | 6 |
| 8-ft round bed, curved, 4-ft sections | 25.13 ft | 27.65 ft | 7 | 9 | 7 |
Landscape Edging Types Compared
Most edging is sold in sections, but the material changes how it bends, cuts and joins. Pick the type that suits the shape of your bed first, then work out how many sections you need.
| Edging type | Common section lengths | Best for | Notes |
|---|---|---|---|
| Plastic / poly edging | 4 ft, 6 ft, 8 ft | Straight runs and gentle curves | Flexible, easy to cut, needs stakes every 3 ft |
| Steel edging | 8 ft | Crisp straight lines | Rigid, holds a clean edge, hard to bend |
| Aluminum edging | 8 ft | Straight runs and curves | Lightweight, rust-proof, bends for curves |
| Stone / brick edging | Sold by the piece | Decorative borders | Set in sand or mortar; count pieces, not sections, and no connectors |
| Wood / timber edging | 4 ft, 8 ft | Rustic beds | Cut to fit with a handsaw; stake or screw to posts |
| Rubber edging | 4 ft | Play areas and paths | Flexible, made from recycled rubber, easy to cut |
How to Measure for Landscape Edging
Walk the edge of the bed with a tape measure, or lay a garden hose along the line you want and measure the hose. For a rectangle, measure the length and width. For a circle, measure across the middle (the diameter). For an L-shaped or irregular bed, measure each straight side and add them up, then choose “I know the perimeter” in the calculator and enter the total. Always measure the finished edge line, not the middle of the bed, and add the waste allowance before you buy: 5% for straight runs, 10% for curved runs.
Related Calculators
Landscape Edging Calculator FAQs
How much edging do I need for a 10×10 bed?
A 10 × 10 ft bed has a perimeter of 40 ft. On a straight run, add 5% waste for 42 ft to order — 11 × 4-ft sections, 14 stakes and 11 connectors. On a curved run, add 10% for 44 ft to order — 11 × 4-ft sections, 14 stakes and 11 connectors.
How far apart should edging stakes be?
Space edging stakes every 3 ft along the run, and add a stake at each end and at every joint on a curve. Stakes hold the edging upright and stop it lifting out of the soil as the ground freezes and thaws.
How much extra edging should I buy?
Buy 5% extra for a straight run and 10% extra for a curved run. The extra covers cuts, joins and bends: a curve needs more because each bend uses up edging and leaves offcuts. For a bed with lots of tight curves, 10% is the safe figure.
What is the difference between a straight run and a curved run?
A straight run follows a straight line, so almost every section is used end to end and 5% waste is enough. A curved run bends around a round or free-form bed, so sections are cut and trimmed to follow the curve and more edging is wasted — allow 10%.
Do I need connectors for landscape edging?
Yes, if your edging comes in sections. Each section joins to the next with a connector, so you need one connector per section — 16 sections need 16 connectors. Stone and brick edging are laid piece by piece and do not use connectors.
Can I cut edging sections to fit?
Yes. Most plastic, rubber and aluminum edging cuts with a hacksaw or a sharp utility knife, and wood edging cuts with a handsaw. Measure twice, cut once, and keep the offcut — it may finish the next run. Where possible, cut from the end that will be hidden by a connector.