Last reviewed: November 11, 2026. Formulas checked against standard industry conversions. How we calculate.
Last reviewed: November 11, 2026. Formulas checked against standard industry conversions. How we calculate.
Quick answer: A 10 × 8 ft pond at 2 ft average depth holds about 1,197 gallons — 160 cubic feet — and needs a 16 × 14 ft pond liner. One cubic foot of water is 7.48 gallons.
Use this free pond volume calculator to work out how many gallons, cubic feet and cubic yards of water your pond holds, and what size liner you need. Enter the length, width and average depth, choose rectangular or oval, and get an instant result — for new ponds, water changes, pump sizing and liner orders.
Pond Volume Calculator
Enter your measurements below. Results update when you change a value, or press Calculate.
- Gallons: –
- Cubic feet: –
- Cubic yards: –
- Pond liner size: –
How it works: rectangular volume is length × width × depth; an oval pond holds about 0.785 of the rectangular volume. One cubic foot of water is 7.48 gallons. Liner size adds twice the depth plus 2 ft of overlap on each side.
Estimates only. Measure the average depth carefully — see below.
How We Calculate Pond Volume
For a rectangular pond, volume in cubic feet equals length times width times average depth. For an oval or kidney-shaped pond, multiply that figure by 0.785 (pi divided by 4), because the rounded shape holds about 78.5% of the rectangular volume. Gallons equals cubic feet times 7.48052, since one cubic foot of water is 7.48 gallons. Cubic yards equals cubic feet divided by 27. Liner size equals length plus twice the depth plus 2 ft of overlap, by width plus twice the depth plus 2 ft — the extra 2 ft on each side is the overlap that anchors the liner under the edging stones.
Common Pond Sizes
Use this table to plan a rectangular pond at a 2 ft average depth. Gallons are rounded to whole gallons.
| Pond size | Depth | Cubic feet | Gallons | Liner size |
|---|---|---|---|---|
| 8 × 6 ft | 2 ft | 96 | 718 | 14 × 12 ft |
| 10 × 8 ft | 2 ft | 160 | 1,197 | 16 × 14 ft |
| 12 × 10 ft | 2 ft | 240 | 1,795 | 18 × 16 ft |
| 10 × 10 ft | 3 ft | 300 | 2,244 | 18 × 18 ft |
| 15 × 10 ft | 3 ft | 450 | 3,366 | 23 × 18 ft |
For an oval pond of the same length and width, multiply the gallons by 0.785 — a 10 by 8 ft oval at 2 ft deep holds about 940 gallons, not 1,197.
Worked Examples
Example 1 — 10 ft by 8 ft rectangular pond at 2 ft average depth: Cubic feet is 10 times 8 times 2, or 160. Cubic yards is 160 divided by 27, or 5.93. Gallons is 160 times 7.48052, or 1,196.88, rounded to 1,197. Liner is 10 plus 2 times 2 plus 2, or 16 ft, by 8 plus 2 times 2 plus 2, or 14 ft.
Example 2 — 12 ft by 10 ft oval pond at 3 ft average depth: Cubic feet is 12 times 10 times 3 times 0.7854, or 282.74. Cubic yards is 282.74 divided by 27, or 10.47. Gallons is 282.74 times 7.48052, or 2,115. Liner is 12 plus 2 times 3 plus 2, or 20 ft, by 10 plus 2 times 3 plus 2, or 18 ft.
How to Measure Average Depth
Average depth is the number most people get wrong, and it decides the whole result. Measure the depth at several points across the pond — the deep middle, the shallow shelves, the edges — and average them. For a bowl-shaped pond with a flat bottom, the actual depth is the average depth. For a pond that slopes from a shallow shelf to a deep centre, use the deepest depth times 0.7 as a fair estimate. Never use the deepest point alone: a 3 ft deep centre with 1 ft shelves does not make a 3 ft deep pond, and you would over-order water, liner and treatments.
What Size Pond Liner Do I Need?
Liner size is the pond length plus twice the depth plus 2 ft of overlap, by the same for the width. The depth term is doubled because the liner must run down one side, across the bottom and up the other side. The extra 2 ft is overlap: about 1 ft of liner tucked under the edging on each side, so the liner stays anchored and the water line stays hidden. For a 10 by 8 ft pond at 2 ft deep, that is a 16 by 14 ft liner. Buy the next standard liner size up if your exact size is not sold — a liner that is too small cannot be stretched, and a little extra is easy to trim.
Frequently Asked Questions
How many gallons is my pond?
Multiply length by width by average depth in feet to get cubic feet, then multiply by 7.48. A 10 by 8 ft pond at 2 ft average depth is 160 cubic feet, or about 1,197 gallons. For an oval pond, multiply the result by 0.785.
How do I work out the average depth of a pond?
Measure the depth at several points across the pond and average them. For a bowl-shaped pond, the deepest depth times 0.7 is a fair estimate. Do not use the deepest point alone — the shallow shelves bring the average down.
What size liner do I need for my pond?
Length plus twice the depth plus 2 ft, by width plus twice the depth plus 2 ft. A 10 by 8 ft pond at 2 ft deep needs a 16 by 14 ft liner. Buy the next standard size up if your exact size is not sold.
How many gallons are in a cubic foot of water?
One cubic foot of water is 7.48 gallons. One cubic yard is 27 cubic feet, or about 202 gallons.
What is the volume of an oval pond?
Multiply length by width by average depth, then multiply by 0.785 (pi divided by 4). A 12 by 10 ft oval pond at 3 ft average depth holds about 2,115 gallons.
What size pump do I need for my pond?
Size the pump to circulate the full pond volume every 1 to 2 hours. A 1,200-gallon pond needs a 600 to 1,200 gallon-per-hour pump; a 2,100-gallon pond needs 1,050 to 2,100 gallons per hour. Check the pump’s rated flow at your waterfall or filter height, not just its maximum flow.
Related Calculators
- Pond Rock Calculator — rock for pond edges and borders
- Cubic Yard Calculator — volume in cubic feet and yards for any project
- Rock Calculator — cubic yards and tons for landscape rock
- Gravel Calculator — cubic yards and tons for gravel
Last updated: November 2026.