Last reviewed: November 14, 2026. Formulas checked against standard industry conversions. How we calculate.
Quick answer: A 15 ft round pool that is 4 ft deep holds about 5,300 gallons of water, and a 24 ft round pool at the same depth holds about 13,500 gallons. Pool volume in gallons = surface area (sq ft) × average depth (ft) × 7.48, because one cubic foot of water is 7.48 gallons. Use the pool volume calculator below for your pool’s exact shape, or look up common sizes in the table.
Use this pool volume calculator to work out how many gallons and litres your pool holds, and how long it will take to fill it with a garden hose. Choose rectangle, round, oval or kidney shape, enter your dimensions and the depths at the shallow and deep ends, and the calculator averages the depth for you. Knowing your pool’s volume is also the starting point for chemical dosing — every dose on this page is given per 10,000 gallons, so divide your pool’s gallons by 10,000 and multiply.
Pool Volume Calculator
Enter your measurements below. Results update when you change a value, or press Calculate.
For a flat-bottom pool, enter the same depth in both boxes. Average depth = (shallow end + deep end) ÷ 2. Measure the depth of the water, not the height of the wall.
Most garden hoses deliver 5–10 gallons per minute. Change the rate if you know yours.
Average depth: 4.00 ft
Surface area: 176.71 sq ft
Water volume: 706.86 cubic feet
Pool volume: 5,287 gallons
In litres: 20,015 litres
Fill time at 9 GPM: 9 hours 47 minutes
Estimates only. Kidney pools are estimated at 80% of the rectangular volume with the same length, width and depth. Check chemical doses against the product label.
How to Calculate Pool Volume
Every pool volume formula follows the same three steps: work out the surface area, multiply by the average depth to get cubic feet, then multiply by 7.48 to convert cubic feet to gallons. One cubic foot of water is 7.48 gallons, and one gallon is 3.785 litres.
Average depth = (shallow end depth + deep end depth) ÷ 2. A pool that is 3 ft deep at the shallow end and 8 ft deep at the deep end has an average depth of 5.5 ft. For a flat-bottom above-ground pool, the shallow and deep ends are the same, so the average depth is just the water depth. Measure from the water surface to the floor — not from the top of the wall, which sits above the water line.
| Pool shape | Surface area (sq ft) | Volume in gallons |
|---|---|---|
| Rectangle | Length × Width | Length × Width × Avg depth × 7.48 |
| Round | 3.14 × Radius² | 3.14 × Radius² × Avg depth × 7.48 |
| Oval | 0.785 × Length × Width | 0.785 × Length × Width × Avg depth × 7.48 |
| Kidney | Length × Width × 0.8 | Length × Width × Avg depth × 7.48 × 0.8 |
For a round pool, the radius is half the diameter: a 15 ft round pool has a radius of 7.5 ft. A handy shortcut for round pools is diameter² × depth × 5.9 — for a 15 ft round pool at 4 ft deep, that is 15 × 15 × 4 × 5.9 = 5,310 gallons, within half a percent of the exact 5,287 gallons. Kidney pools curve inward, so they hold roughly 80% of the water a rectangle of the same length and width would hold; the calculator uses that 0.8 factor.
Common Pool Sizes: How Many Gallons?
The table below uses the formulas above at the depths shown. Above-ground round pools are usually listed at 4 ft of water depth; in-ground pools use the average of the shallow and deep ends.
| Pool size and shape | Depth | Gallons (approx.) | Litres (approx.) |
|---|---|---|---|
| 12 ft round | 4 ft | 3,384 | 12,809 |
| 15 ft round | 4 ft | 5,287 | 20,015 |
| 18 ft round | 4 ft | 7,614 | 28,821 |
| 21 ft round | 4 ft | 10,363 | 39,229 |
| 24 ft round | 4 ft | 13,536 | 51,237 |
| 15 × 30 ft oval | 4 ft | 10,575 | 40,029 |
| 16 × 32 ft rectangle | 5 ft avg. | 19,149 | 72,486 |
| 18 × 36 ft rectangle | 5 ft avg. | 24,235 | 91,740 |
| 20 × 40 ft rectangle | 5 ft avg. | 29,920 | 113,259 |
| 16 × 32 ft kidney | 5 ft avg. | 15,319 | 57,989 |
Our guide to how many square feet is a 15ft round pool covers the surface area side: a 15 ft round pool covers about 177 square feet and holds about 3,965 gallons at 3 ft deep, rising to about 5,287 gallons at 4 ft deep.
Worked Example: A 15 ft Round Pool at 4 ft Deep
Take a 15 ft round above-ground pool filled to 4 ft of water depth. The radius is 15 ÷ 2 = 7.5 ft. Surface area = 3.14 × 7.5² = 176.71 sq ft. Water volume = 176.71 × 4 = 706.86 cubic feet. Gallons = 706.86 × 7.48 = 5,287 gallons. Litres = 5,287 × 3.785 = about 20,000 litres. At a typical hose rate of 9 gallons per minute, filling it takes 5,287 ÷ 9 = 587 minutes, or about 9 hours 47 minutes.
A second example with a sloped floor: a 16 × 32 ft rectangle, 3 ft at the shallow end and 8 ft at the deep end. Average depth = (3 + 8) ÷ 2 = 5.5 ft. Volume = 16 × 32 × 5.5 = 2,816 cubic feet, and 2,816 × 7.48 = 21,064 gallons.
Pool Chemical Dosing per 10,000 Gallons
Once you know your pool’s volume, scale every dose to it: dose for your pool = table dose × (your gallons ÷ 10,000). A 5,287-gallon pool needs just over half the dose listed below; a 20,000-gallon pool needs double. The doses below come from Swim University’s dosing guide, updated August 18, 2026. Always test your water first and follow the label on the product you buy — these are starting points, not a substitute for a test reading.
| Chemical | What it does | Amount per 10,000 gallons |
|---|---|---|
| Alkalinity increaser (baking soda) | Raises total alkalinity | 1.5 lb to raise alkalinity by 10 ppm |
| pH increaser (soda ash) | Raises pH | 6–8 oz to raise pH by 0.2 |
| pH decreaser | Lowers pH (and alkalinity) | 8 oz at pH 7.6–7.9; 16 oz at pH 8.0–8.4 |
| Chlorine granules | Routine chlorination | 3–4 oz |
| Chlorine tablets (3-inch) | Routine chlorination | 2–3 tablets |
| Liquid chlorine (10–12.5%) | Routine dose / shock | 40 fl oz routine; about 1 gallon to shock |
| Shock (calcium hypochlorite) | Weekly shock / algae treatment | About 1 lb |
| Cyanuric acid (stabilizer) | Protects chlorine from sunlight | About 3 lb to raise CYA from 0 to 30–50 ppm |
| Calcium hardness increaser | Protects surfaces and equipment | About 5 lb to raise hardness by 50 ppm |
For example, to raise the alkalinity of a 5,287-gallon pool by 10 ppm you need 1.5 lb × (5,287 ÷ 10,000) = about 0.8 lb of baking soda. Adjust alkalinity first, then pH, then chlorine, and wait at least 20 minutes between doses. Never mix pool chemicals together outside the pool.
How Long Does It Take to Fill a Pool?
Fill time in minutes = gallons ÷ hose flow rate in gallons per minute. A typical garden hose delivers 5–10 gallons per minute, so a 10,000-gallon pool takes about 33 hours at 5 GPM, about 18 hours 31 minutes at 9 GPM, and about 16 hours 40 minutes at 10 GPM. A 5,287-gallon 15 ft round pool takes about 9 hours 47 minutes at 9 GPM. Filling overnight is common for larger pools — check the water level before you leave it running, and never leave a filling pool unattended for long, since a stuck hose or a failed fitting can flood a yard.
Frequently Asked Questions
How many gallons is a 15 ft round pool?
A 15 ft round pool holds about 5,287 gallons at 4 ft of water depth, and about 3,965 gallons at 3 ft deep. The formula is 3.14 × 7.5² × depth × 7.48.
How do I calculate pool volume?
Multiply the pool’s surface area in square feet by its average depth in feet to get cubic feet, then multiply by 7.48 to get gallons. For a rectangle, area is length × width; for a round pool it is 3.14 × radius²; for an oval it is 0.785 × length × width; for a kidney pool, use length × width × 0.8.
How do you find the average depth of a pool?
Add the shallow end depth and the deep end depth, then divide by 2. A pool that is 3 ft at the shallow end and 8 ft at the deep end has an average depth of 5.5 ft. Measure the depth of the water, not the height of the wall.
How long does it take to fill a pool with a garden hose?
Divide the pool’s gallons by your hose’s flow rate in gallons per minute, then divide by 60 for hours. A 5,287-gallon pool takes about 9 hours 47 minutes at 9 gallons per minute, and a 10,000-gallon pool takes about 18 hours 31 minutes at the same rate. Most garden hoses deliver 5–10 gallons per minute.
How many litres is my pool?
Multiply gallons by 3.785. A 5,287-gallon pool holds about 20,000 litres, and a 10,000-gallon pool holds about 37,850 litres.
How much chlorine do I need for my pool?
Scale the dose to your pool’s volume: a 10,000-gallon pool needs about 1 lb of calcium hypochlorite shock, 3–4 oz of chlorine granules for a routine dose, or 2–3 three-inch tablets. For a 5,287-gallon pool, use just over half of those amounts. Always test your water first and follow the product label.
Related Calculators
- How many square feet is a 15ft round pool? — surface area, volume and cost for the most common above-ground size
- Calculators — every ExactYard calculator in one place
Sources: Swim University, “How Much of Each Chemical to Add to Your Pool,” updated August 18, 2026 (chemical doses per 10,000 gallons); pool volume formulas use the standard conversion of 1 cubic foot = 7.48 gallons and 1 gallon = 3.785 litres.
Reviewed by Faizan Ellahi, ExactYard.
Last updated: November 2026.