Start calculating

Retaining Wall Cost Calculator

Last reviewed: November 10, 2026. Formulas checked against standard industry conversions. How we calculate.

Quick answer: A 20 ft long, 4 ft high concrete block retaining wall (80 sq ft) costs about $2,400 installed — $1,200 in materials and $1,200 in labor, or $120 per linear foot. Natural stone is the most expensive option at about $50 per sq ft installed, while timber is the cheapest at about $20 per sq ft.

Use this free retaining wall cost calculator to estimate what a retaining wall costs to build. Enter the wall length and height, choose a wall type, and adjust the installed price per square foot if you have a local quote. The calculator shows the wall face area, the total installed cost, the materials and labor split, and the cost per linear foot.

Retaining Wall Cost Calculator

Enter your measurements below. Results update when you change a value, or press Calculate.

Leave the price at the default for your wall type, or enter a quote from a local contractor. Changing the wall type resets the price to that type’s default.

Wall face area: – sq ft

Total installed cost: –

Materials cost: –

Labor cost: –

Cost per linear foot: –

Installed rate used: – per sq ft

Estimates only. Permits, excavation, drainage, footings and engineering are not included — see below.

How We Calculate Retaining Wall Cost

Wall face area equals wall length times wall height. Total installed cost equals face area times the installed price per square foot. Materials and labor are split using the standard split for the wall type you choose. Cost per linear foot equals total installed cost divided by wall length.

For example, a 20 ft long, 4 ft high concrete block wall has 80 sq ft of face area. At $30 per sq ft installed, the total is 80 times $30, or $2,400, split into $1,200 of materials and $1,200 of labor, or $120 per linear foot.

Retaining Wall Cost by Type

The table below compares all four wall types for the same wall: 20 ft long and 4 ft high, or 80 sq ft of wall face.

Wall typeInstalled cost per sq ftMaterials per sq ftLabor per sq ftTotal for 80 sq ftCost per linear foot
Concrete block$30$15$15$2,400$120
Poured concrete$35$18$17$2,800$140
Natural stone$50$30$20$4,000$200
Timber$20$10$10$1,600$80

These are installed planning rates for a straightforward wall on level ground with normal access. Steep sites, poor soil, curves and steps all add cost.

Worked Examples

Example 1 — concrete block, 20 ft by 4 ft: Face area is 20 times 4, or 80 sq ft. Total is 80 times $30, or $2,400. Materials are 80 times $15, or $1,200. Labor is 80 times $15, or $1,200. Cost per linear foot is $2,400 divided by 20, or $120.

Example 2 — natural stone, 30 ft by 6 ft: Face area is 30 times 6, or 180 sq ft. Total is 180 times $50, or $9,000. Materials are 180 times $30, or $5,400. Labor is 180 times $20, or $3,600. Cost per linear foot is $9,000 divided by 30, or $300.

What Else Affects the Price?

Height. Cost grows with face area, so a wall twice as high costs roughly twice as much for the same length — and taller walls need deeper footings, more drainage and often engineering. Many areas require a permit and an engineered design for walls over 3 to 4 ft high.

Drainage. Every retaining wall needs drainage: gravel backfill and a drain pipe behind the wall. Pea gravel is a common drainage backfill — use our pea gravel calculator to work out how much you need, and see how much pea gravel costs. Allow for the cost of the gravel, pipe and filter fabric; our post on landscape fabric under pea gravel explains where fabric helps and where it hurts.

Excavation and footings. Digging the base trench, a compacted gravel footing and the first buried course (usually 6 to 12 inches below grade) are part of the labor cost. Rocky soil or a slope that needs terracing adds to the bill.

Wall type trade-offs. Timber is the cheapest and easiest to build, but it has the shortest life. Concrete block is the common middle ground. Poured concrete is strong and clean-looking but needs formwork. Natural stone is the most expensive and the most decorative, and it takes the most skilled labor.

Frequently Asked Questions

How much does a retaining wall cost per square foot?

Installed, expect about $20 per sq ft for timber, $30 for concrete block, $35 for poured concrete and $50 for natural stone. Those rates include materials and labor for a straightforward wall, but not permits, excavation extras or drainage.

What is the cheapest type of retaining wall?

Timber is the cheapest retaining wall type, at about $20 per sq ft installed — roughly a third less than concrete block. It is also the easiest to build yourself, but it lasts 10 to 20 years, while block, poured concrete and stone last decades longer.

Does wall height affect the cost?

Yes. Cost is driven by wall face area, which is length times height, so doubling the height roughly doubles the cost. Taller walls also need deeper footings, more drainage and, above about 4 ft in most areas, a permit and an engineered design, which add fixed costs.

Do I need a permit, and what does drainage cost?

Most areas require a permit for retaining walls over 3 to 4 ft high, and taller walls usually need engineering. Budget separately for the permit, for gravel backfill and a drain pipe behind the wall, and for filter fabric. These are not included in the per-square-foot rates above.

Concrete block vs poured concrete — which is better?

Concrete block is cheaper (about $30 per sq ft installed), easier to repair course by course, and suits most garden walls. Poured concrete (about $35 per sq ft) is stronger and better for tall or load-bearing walls, but it needs formwork and a concrete pour, so small jobs cost more.

How accurate is this estimate?

This calculator gives a planning estimate based on typical installed rates per square foot. Real quotes vary with site access, soil, wall height, local labor rates and permits. Get two or three local quotes before budgeting, and use the price-per-square-foot box above to rerun the estimate with a quoted rate.

Related Calculators

Last updated: November 2026.

Related calculators

For the materials behind the wall, try the retaining wall calculator and the retaining wall block calculator. For drainage backfill, use the pea gravel calculator.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators