Start calculating

Last reviewed: November 2, 2026. Formulas checked against standard industry conversions. How we calculate.

Driveway Gravel Calculator

Estimate cubic yards, tons and cost for a gravel driveway, layer by layer. Each measurement has its own unit, so you can mix feet, yards and metres. Set a layer’s depth to 0 to skip it.

Layers

Tip: the price unit follows the “Results in” choice (per tonne or per m³ when metric).

–cubic yards
–tons
–material cost
–area

Estimates only. Density varies by stone and moisture; confirm quantities and tons-per-yard with your supplier.

How we calculate it

Cubic yards per layer = length (ft) × width (ft) × depth (in) ÷ 12 ÷ 27 × (1 + waste %). Yards and metres are converted to feet first, and centimetres to inches. Tons = cubic yards × tons per cubic yard. Published figures for gravel run from about 1.35 to 1.5 tons per cubic yard depending on stone type, size and moisture, so use your supplier’s number when you have it.

Typical amounts (crushed stone, before waste)

DrivewayArea4 in (yd³)6 in (yd³)6 in (tons)
10 × 50 ft500 sq ft6.179.2613.0
12 × 50 ft600 sq ft7.4111.1115.6
12 × 100 ft1,200 sq ft14.8122.2231.1
20 × 100 ft2,000 sq ft24.6937.0451.9

Layers and depth

A new gravel driveway is often built in three layers: a coarse sub-base (such as #3 stone), a base (such as #57 stone), and a finer surface layer. Advice on depth varies. Some sources suggest 4 to 6 in of gravel is enough for light residential use, while others recommend a layered build of 12 in or more on soft ground or for heavy vehicles. The defaults here (4 + 4 + 2 in) sit in the middle. Soft, wet or clay soil, and heavy vehicles, call for more. Top up an existing driveway by using only the surface layer. See How Deep Should Gravel Be?

FAQ

How much gravel for a 12 × 50 ft driveway? At 6 in total depth, about 11.1 cubic yards, or roughly 15.6 tons of crushed stone, before waste.

Tons or cubic yards? Suppliers use either. Order in whichever unit they quote, and ask for their tons-per-yard figure.

Do I need extra for compaction? Yes. A 10% allowance is typical, and the waste setting adds it for you.

Can I use this for paths or patios? Yes. Enter the dimensions and use one layer.

Why does gravel need topping up? The surface layer shifts and wears over time, so plan to replenish it every few years.

Related

Gravel Calculator · Paver Base Calculator · Concrete Calculator · How Much Gravel Do I Need? · How to Measure Your Project Area

Last updated: October 2026.

Related calculators

Also try the crushed stone calculator and the French drain calculator.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators