Last reviewed: November 10, 2026. Formulas checked against standard industry conversions. How we calculate.
French Drain Gravel Calculator
Use this free french drain gravel calculator to calculate gravel for french drain projects in cubic yards and tons. It works out how much gravel a french drain trench needs, accounting for the pipe, so you do not order stone for space the pipe already fills. Enter your trench size, choose a stone type, and get an instant estimate, with an optional cost.
French Drain Calculator
Enter your measurements below. Results update when you change a value, or press Calculate.
Enter your trench measurements to see a result.
How to Calculate Gravel for a French Drain
First, find the trench volume in cubic feet: trench length in feet times trench width in feet times trench depth in feet. Width and depth in inches are divided by 12 to convert them to feet. Next, subtract the pipe volume: pi times the pipe radius in feet squared times the trench length, where the radius in feet is the pipe diameter in inches divided by 24. The result is the gravel volume in cubic feet. Divide by 27 for cubic yards, then multiply by the stone density in tons per cubic yard for tons. Finally, add your waste allowance to the yards and tons.
Worked example: A 50 ft trench, 12 in wide and 18 in deep, with a 4 in pipe and #57 stone at 1.35 tons per cubic yard gives a trench volume of 50 x 1 x 1.5 = 75.00 cu ft. The pipe volume is pi x (4 / 24) squared x 50 = 4.36 cu ft. Gravel volume is 75.00 – 4.36 = 70.64 cu ft, which is 70.64 / 27 = 2.62 cu yd, or 2.62 x 1.35 = 3.53 tons before waste. With a 10% waste allowance, that becomes 2.88 cu yd and 3.89 tons.
What Gravel Is Best for a French Drain?
Washed, angular #57 stone, about 3/4 in in size, is the standard choice for a french drain. It drains freely, locks around the pipe, and resists shifting. Drain rock #67 also works well for drainage. Pea gravel drains, but its rounded stones shift more easily and do not lock together as well. Avoid stone with fines or dust for the layer around the pipe, because fines can clog the drainage path. Wrap the trench in landscape fabric to keep soil out of the gravel and pipe.
| Stone type | Size and character | Weight per cubic yard (tons) |
|---|---|---|
| #57 Washed Stone | About 3/4 in, washed and angular, the standard french drain stone | 1.35 |
| Drain Rock (#67) | Clean drainage stone, smaller than #57 | 1.30 |
| Pea Gravel | Small, rounded stone, drains but shifts | 1.40 |
| Crushed Stone (general) | Angular crushed stone for general use | 1.40 |
How Much Gravel Under a Concrete Slab?
For the gravel base under a concrete slab, use a compacted base of crusher run or #57 stone, typically 4 to 6 in deep under the slab. The compacted stone spreads the load, improves drainage, and gives the concrete a stable, even base. A thinner layer may be enough for a light-duty pad, while heavier loads and soft ground call for the deeper end of the range.
Example: A 10 x 10 ft slab with a 4 in gravel base needs 10 x 10 x (4 / 12) = 33.3 cu ft of gravel, which is 33.3 / 27 = 1.23 cu yd, or about 1.23 x 1.45 = 1.8 tons of crusher run at 1.45 tons per cubic yard. For the concrete itself, see the Concrete Pad Calculator, and for stone quantities in general, see the Crushed Stone Calculator.
French Drain Gravel FAQs
How much gravel do I need for a 100 ft french drain?
For a 12 in wide, 18 in deep trench with a 4 in pipe, about 5.23 cu yd / 7.06 tons of #57 before waste. That comes from 141.27 cu ft of gravel after subtracting the pipe, divided by 27 and multiplied by 1.35 tons per cubic yard.
What size gravel is best for a french drain?
#57 stone, about 3/4 in in size, washed and angular, is the standard choice. It drains freely and locks around the pipe.
Do I subtract the pipe when I calculate gravel for a french drain?
Yes, the calculator does it automatically. A 4 in pipe removes about 0.087 cu ft per foot of trench, which adds up over a long run.
What type of gravel goes under a concrete slab?
Compacted crusher run or #57 stone, 4 to 6 in deep. See Concrete Pad Calculator for the concrete, and the section above on how much gravel under a slab for the worked example.
How deep and wide should a french drain trench be?
Commonly 12 in wide and 18 to 24 in deep, with the pipe sloped about 1% (1 in drop per 8 ft) toward the outlet.
Related Calculators
- Gravel Calculator
- Crushed Stone Calculator
- Rock Calculator
- Concrete Pad Calculator
- Cubic Yards to Tons Calculator
- Dry Well Calculator
Related calculators
For pea gravel projects, try the pea gravel calculator.