Last reviewed: November 14, 2026. Formulas checked against standard industry conversions. How we calculate.
Quick answer: Base in cubic yards = project area in square feet x base depth in inches / 12 / 27. For a 12 ft x 12 ft patio (144 sq ft) with a 6 in base, that is 2.67 cubic yards before the 15% compaction allowance, or 3.07 cubic yards with it. Use the calculator below for your exact size and depth.
Work out how many pavers, how much gravel base and how much sand your patio, walkway or driveway needs. Enter your size and get a materials list in seconds.
- Area–
- Dig depth–
- Gravel base–
- Bedding sand–
- Joint sand (estimate)–
- Weight of pavers–
- Edge restraint–
Estimates only. Bag sizes are 0.5 cu ft. Weights are approximate.
Estimated Cost
For a patio, budget $5-$9 per sq ft for materials if you do it yourself: pavers $3-$6, base gravel and bedding sand $1-$2, and polymeric sand, edging and supplies $0.50-$1 per sq ft. Installed by a pro, pavers typically run $12-$20 per sq ft.
| Project size | Materials (DIY) | Installed |
|---|---|---|
| 100 sq ft | $500-$900 | $1,200-$2,000 |
| 200 sq ft | $1,000-$1,800 | $2,400-$4,000 |
| 500 sq ft | $2,500-$4,500 | $6,000-$10,000 |
To price your project, enter your measurements above, then multiply your area by the per-sq-ft figures. Gravel alone runs about $39-$105 per cubic yard nationally – see our landscaping material prices by state for your state. Prices vary by paver style, stone and delivery, so get a local quote before you order.
For the pavers themselves, try the paver calculator, and for sand quantities use the paver sand calculator.
Paver Base Coverage: How Much Do I Need?
Quick reference for a patio with a 6 in gravel base, 1 in of bedding sand, 4 x 8 in pavers, 1/8 in joints, 10% extra pavers and 15% extra base and sand for compaction – the calculator’s defaults. Run your exact measurements above for other sizes and depths.
| Area | Pavers to order | Gravel base (6 in) | Bedding sand (1 in) | Joint sand |
|---|---|---|---|---|
| 100 sq ft (10 x 10 ft) | 473 | 2.13 cu yd (3.0 tons, 115 bags) | 0.35 cu yd (20 bags) | 90 lb (2 bags) |
| 200 sq ft (10 x 20 ft) | 946 | 4.26 cu yd (6.0 tons, 230 bags) | 0.71 cu yd (39 bags) | 179 lb (4 bags) |
| 500 sq ft (20 x 25 ft) | 2,364 | 10.65 cu yd (14.9 tons, 575 bags) | 1.77 cu yd (96 bags) | 448 lb (9 bags) |
How to Calculate Paver Base
- Measure the project area in square feet (length × width).
- Choose the base depth. Use 4-6 inches for walkways and patios and 8-12 inches for driveways.
- Multiply the area by the depth in feet (inches ÷ 12) to get cubic feet.
- Divide by 27 to get cubic yards.
- Add about 15% because loose gravel compacts.
Example: A 12 × 12 ft patio with a 6 inch base: 144 × 0.5 = 72 cubic feet ÷ 27 = 2.67 cubic yards, or 3.07 cubic yards with 15% extra. At about 1.4 tons per cubic yard, that is roughly 4.3 tons of gravel.
How Deep Should the Base Be Under Pavers?
Use 4-6 inches of compacted base for patios and walkways, and 8-12 inches for driveways. On soft or clay soil, go to the deeper end of the range.
| Project | Compacted base depth |
|---|---|
| Walkway | 4 inches |
| Patio | 4-6 inches |
| Driveway | 8-12 inches |
Soft soil, clay and freezing climates call for a deeper base, so check local advice and the paver maker’s instructions.
How Much Sand Do I Need Under Pavers?
Use a 1 inch layer of coarse bedding sand. The formula is the same as for the base: area × depth in feet, divided by 27. For a 144 sq ft patio, a 1 inch layer is 12 cubic feet, or about 0.44 cubic yards, plus extra for compaction. Use coarse concrete sand for the bed, not fine play sand.
Joint sand is separate. It sweeps into the gaps between pavers, and the amount depends on paver size, joint width and paver thickness. The calculator gives a rough figure. Check the coverage printed on the bag of polymeric sand you plan to buy.
How Many Pavers Do I Need?
Divide the project area by the area of one paver, including the joint, then add 5-10% for cuts and breakage.
Example: 144 sq ft with 4 × 8 in pavers and 1/8 in joints: each paver covers 0.2328 sq ft, so 144 ÷ 0.2328 = 619 pavers, or 681 with 10% extra.
| Paver size | Pavers per sq ft (no joints) |
|---|---|
| 4 × 8 in | 4.5 |
| 6 × 6 in | 4.0 |
| 6 × 9 in | 2.7 |
| 12 × 12 in | 1.0 |
| 12 × 24 in | 0.5 |
| 16 × 16 in | 0.56 |
| 18 × 18 in | 0.44 |
Paver Weight Calculator
The calculator estimates paver weight using a density of 140 lb per cubic foot, which suits concrete pavers. A 4 × 8 × 2 3/8 in paver weighs about 6 lb. Clay brick and natural stone pavers weigh differently, so use the supplier’s weight if you have it.
Gravel Weight: How Many Tons?
Crushed gravel base weighs about 1.4 tons per cubic yard, depending on the stone and moisture. If your supplier sells by the ton, ask them for their weight per yard.
Dig Depth and Edge Restraint
A 6 inch base, 1 inch of sand and 2 3/8 inch pavers means digging about 9 3/8 inches. Edge restraint holds the pavers in place along the outside edge. The calculator estimates the length as the perimeter of a rectangle. Subtract any side that butts up to a wall or slab.
Tips for a Paver Project
- Compact the base in layers of about 4 inches, not all at once.
- Slope the surface about 1/4 inch per foot away from buildings so water drains.
- Have buried utility lines marked before you dig. In the US, call 811.
- Buy a few extra pavers, since matching them later can be hard.
- Planning footings or a concrete border? Try our concrete calculator. To measure odd shapes, see how to figure out square feet, and to convert volumes, see how to calculate cubic yards from square feet.
The base depths, sand depth and tons per yard are typical guidelines. Follow your paver manufacturer’s instructions and local code.
Paver Base Calculator FAQs
How much base do I need for pavers?
4-6 inches of compacted gravel for walkways and patios, and 8-12 inches for driveways.
How much sand do I need under pavers?
A 1 inch layer. For 100 sq ft, that is about 8.3 cubic feet, or 0.31 cubic yards, before extra for compaction.
How many pavers do I need for a 12×12 patio?
About 681 pavers measuring 4 × 8 inches, with 1/8 inch joints and 10% extra.
How deep should I dig for a paver patio?
Base depth plus 1 inch of sand plus paver thickness. For a 6 inch base and 2 3/8 inch pavers, about 9 3/8 inches.
How many tons of gravel do I need for a 100 sq ft patio?
At 6 inches deep, about 1.85 cubic yards, or 2.6 tons, before extra for compaction.
Related calculators: to work out how many pavers you need, try the paver calculator.
Related calculators
For sand quantities, try the sand calculator.
See projects and ideas on Pinterest: ExactYard on Pinterest