Last reviewed: November 2, 2026. Formulas checked against standard industry conversions. How we calculate.
Use this free sand calculator, also a sand estimator, to estimate how many cubic yards and tons of sand you need for paver bedding, sandboxes, pool bases and landscaping. Enter your measurements, choose a sand type, and get an instant estimate in cubic yards, cubic feet, tons and 50 lb bags, with an optional cost estimate.
Sand Calculator
Enter your measurements below. Results update when you change a value, or press Calculate.
Cubic yards needed: – cu yd
Cubic feet: – cu ft
Tons needed: – tons
50 lb bags needed: – bags
Estimated cost: Enter a price per ton to see cost.
Estimates vary with actual density, moisture and compaction. One 50 lb bag of sand is about 0.5 cubic feet.
How Much Sand Do I Need?
For a rectangular area, use this simple formula: square feet × depth in inches ÷ 324 = cubic yards. For example, a 200 sq ft paver patio at 1 in bedding needs 200 × 1 ÷ 324 = 0.62 cubic yards of sand. Enter your exact measurements in the sand calculator above for a result in cubic yards, cubic feet, tons and bags, with waste included.
Sand Coverage: How Far Does One Cubic Yard Go?
One cubic yard of sand covers:
| Depth | Area covered by 1 cubic yard |
|---|---|
| 1 inch | 324 sq ft |
| 2 inches | 162 sq ft |
| 3 inches | 108 sq ft |
| 4 inches | 81 sq ft |
| 6 inches | 54 sq ft |
Sand for a Paver Base
For paver bedding, use a 1 inch layer of concrete sand or mason sand, screeded level over a compacted base. Do not use a thick bedding layer: it can settle unevenly under the pavers.
Sand for a Sandbox
For a sandbox, use 6 to 12 inches of play sand. Play sand is washed and screened, and a deeper layer gives children a soft surface to dig in. Measure the inside of the box and enter the depth in the calculator above.
Sand Under an Above-Ground Pool
Under an above-ground pool, use a 1 to 2 inch layer of sand to smooth the ground and protect the liner from stones and roots. Level the ground first, then spread and compact the sand before setting the pool.
How Much Does a Cubic Yard of Sand Weigh?
A cubic yard of sand weighs about 2,600 to 2,900 lb depending on type and moisture. At the site’s 1.40 tons per cubic yard density, that is 2,800 lb (1.40 × 2,000). Wet sand weighs more than dry sand, so allow for moisture when planning delivery.
Frequently Asked Questions
How much sand do I need for a paver patio?
Multiply the patio area in square feet by the bedding depth in inches and divide by 324. For a 200 sq ft patio at 1 inch of bedding, that is 0.62 cubic yards. Use the calculator above for your exact size, and add waste for uneven ground.
How many bags of sand are in a cubic yard?
There are 54 bags in a cubic yard when each 50 lb bag holds about 0.5 cubic feet: 27 cubic feet ÷ 0.5 cubic feet = 54 bags. The calculator above rounds bag counts up, so you do not come up short.
How much does a cubic yard of sand weigh?
About 2,600 to 2,900 lb, depending on the sand type and how wet it is. At 1.40 tons per cubic yard, a cubic yard weighs 2,800 lb.
Sand calculator or sand estimator — same thing?
Yes. This page is both: a sand calculator and a sand estimator that turns your measurements into an estimate of cubic yards, cubic feet, tons and bags.
Related Calculators
Related calculators
For paver bases, use the paver base calculator, and for a decorative stone, the pea gravel calculator.