Last reviewed: November 13, 2026. Formulas checked against standard industry conversions. How we calculate.
Concrete Mix Ratio Calculator
For 1 cubic yard of 1:2:4 general-purpose mix with 10% waste, you need 45.74 cu ft of dry mix: 7 bags of cement (94 lb each), 13.07 cu ft of sand and 26.14 cu ft of aggregate. Enter your volume and mix below for exact quantities.
- Dry volume–
- Cement (exact)–
- Sand–
- Aggregate–
Results update as you type. One 94 lb bag of cement equals 1 cu ft.
How to Calculate a Concrete Mix Ratio
- Start with the wet volume of concrete you need, in cubic yards.
- Add waste (10% is standard) and convert to cubic feet: multiply by 27.
- Multiply by the 1.54 dry-volume factor to get the dry volume of loose ingredients.
- Split the dry volume by the mix ratio parts. For 1:2:4, cement is 1/7, sand is 2/7 and aggregate is 4/7 of the dry volume.
- Cement bags equal the cubic feet of cement, since one 94 lb bag is 1 cu ft. Round up when buying.
The 1.54 factor accounts for the air voids between sand and aggregate particles: dry ingredients take up about 54% more space than the wet concrete they make.
Concrete Mix Ratio Worked Examples
Example 1: 1 cubic yard, 1:2:4 mix, 10% waste
Dry volume = 1 x 1.10 x 27 x 1.54 = 45.74 cu ft. Split 7 ways: cement = 45.74 / 7 = 6.53 bags, so buy 7 bags; sand = 13.07 cu ft (0.48 cu yd); aggregate = 26.14 cu ft (0.97 cu yd).
Example 2: 2 cubic yards, 1:2:3 mix, 10% waste
Dry volume = 2 x 1.10 x 27 x 1.54 = 91.48 cu ft. Split 6 ways: cement = 91.48 / 6 = 15.25 bags, so buy 16 bags; sand = 30.49 cu ft (1.13 cu yd); aggregate = 45.74 cu ft (1.69 cu yd).
Cement, Sand and Aggregate per Cubic Yard
Quantities below are for 1 cubic yard of wet concrete with 10% waste (45.74 cu ft of dry mix).
| Mix ratio | Best for | Cement bags | Sand (cu ft) | Aggregate (cu ft) |
|---|---|---|---|---|
| 1:2:4 | General purpose | 6.53 (buy 7) | 13.07 | 26.14 |
| 1:2:3 | Structural | 7.62 (buy 8) | 15.25 | 22.87 |
| 1:3:6 | Foundation / mass concrete | 4.57 (buy 5) | 13.72 | 27.44 |
Which Mix Ratio Should I Use?
- 1:2:4 — general purpose: the default for slabs, footings, paths, fence posts and garden walls.
- 1:2:3 — structural: richer in cement, for beams, columns, suspended slabs and anything carrying a load. Check your plans or local code for the specified strength.
- 1:3:6 — foundation / mass concrete: leaner and cheaper, for mass foundations, blinding and large unreinforced pours.
Tips for Mixing Concrete by Ratio
- Measure by volume with a bucket or gauge box, not by shovelfuls, so the ratio stays accurate.
- Mix the dry cement and sand first, then add aggregate, then add water a little at a time.
- Add 10% waste for spillage, uneven formwork and over-excavation. Use 15% on rough ground.
- Buy one extra bag of cement: it is cheap insurance against a short pour.
- For jobs over about 1 cubic yard, compare the cost of bags against ready-mix delivery with the Concrete Calculator.
Related Calculators
Planning the rest of the job? Try the Concrete Calculator for cubic yards and ready-mix cost, the Concrete Bag Calculator for bag counts by bag size, and the Mortar Calculator for brick and block laying.
Concrete Mix Ratio Calculator FAQs
How many bags of cement do I need for 1 cubic yard of concrete?
For a 1:2:4 mix with 10% waste, 1 cubic yard needs 6.53 bags of cement, so buy 7 ninety-four-pound bags. You also need 13.07 cu ft of sand and 26.14 cu ft of aggregate.
What is the 1:2:4 concrete mix ratio?
1:2:4 means 1 part cement, 2 parts sand and 4 parts aggregate by volume. It is the standard general-purpose mix for slabs, footings, paths and small structural work.
How do you calculate dry volume from wet volume?
Multiply the wet volume in cubic yards by 1.10 for 10% waste, then by 27 to get cubic feet, then by the 1.54 dry-volume factor. For 1 cubic yard that gives 45.74 cubic feet of dry mix.
How much sand and aggregate do I need for 2 cubic yards of 1:2:3 mix?
With 10% waste, 2 cubic yards of 1:2:3 mix needs 91.48 cubic feet of dry mix: 15.25 bags of cement (buy 16), 30.49 cubic feet of sand (1.13 cubic yards) and 45.74 cubic feet of aggregate (1.69 cubic yards).
What is the difference between a 1:2:3 mix and a 1:3:6 mix?
1:2:3 is a richer structural mix with more cement per yard, used for beams, columns and slabs that carry loads. 1:3:6 is a leaner mix used for foundations and mass concrete where strength demands are lower.
How many cubic feet is a bag of cement?
One 94 lb bag of Portland cement is about 1 cubic foot, so the number of bags equals the cubic feet of cement in the mix.