Start calculating

Last reviewed: November 2, 2026. Formulas checked against standard industry conversions. How we calculate.

Concrete Bag Calculator

Find out how many bags of concrete you need for a pad, slab or post hole. Pick your bag size, enter your measurements and get the bag count, weight and cost in seconds.

0 bags of 80 lb to buy
  • Concrete volume (with waste)–
  • Cubic yards–
  • 40 lb bags–
  • 50 lb bags–
  • 60 lb bags–
  • 80 lb bags–
  • Weight of selected bags–
  • Estimated bag cost–

Bag counts round up to whole bags. Yields vary slightly by brand, so check your bag.

How to Figure Out How Many Bags of Concrete You Need

  1. Measure the length, width and thickness. Convert inches to feet by dividing by 12.
  2. Multiply length × width × thickness to get cubic feet.
  3. Add about 10% for waste and uneven ground.
  4. Divide by the yield of one bag (for example 0.6 cubic feet for an 80 lb bag) and round up.
Bags = (L ft × W ft × T ft × 1.10) ÷ yield per bag

Example: A 10 × 10 ft pad that is 4 inches thick has 10 × 10 × 0.333 = 33.3 cubic feet. With no waste, that is 33.3 ÷ 0.6 = 55.6, so 56 bags of 80 lb mix. With 10% extra, you need 62 bags.

How Much Concrete Is in a Bag?

Bag sizeYieldBags per cubic yardCoverage at 4 in thick
40 lbabout 0.30 cu ft900.9 sq ft
50 lbabout 0.375 cu ft721.1 sq ft
60 lbabout 0.45 cu ft601.35 sq ft
80 lbabout 0.60 cu ft451.8 sq ft

These are typical yields for premixed concrete. Check the yield printed on your bag, because brands and mixes differ slightly.

80 lb Bag Concrete Calculator: Bags by Pad Size

Bags needed for a pad that is 4 inches thick, rounded up, with no waste added:

Pad sizeVolume80 lb bags60 lb bags
4 × 4 ft5.3 cu ft912
6 × 6 ft12 cu ft2027
8 × 8 ft21.3 cu ft3648
10 × 10 ft33.3 cu ft5675
12 × 12 ft48 cu ft80107

Add about 10% to each figure for waste. Pads thicker than 4 inches need proportionally more.

How Many Bags of Concrete for Post Holes?

For fence or deck posts, choose “Post hole or round footing”. The calculator treats the hole as a cylinder, and it subtracts the volume of the post if you tell it the post size.

Example: A hole that is 10 inches wide and 24 inches deep, with a 4×4 post inside, takes about 0.92 cubic feet of concrete. That is about 1.5 bags of 80 lb mix, so plan on 2 bags per post. For a whole fence, use our fence calculator.

Bags of Concrete vs. Ready-Mix

One cubic yard is 27 cubic feet, which is about 45 bags of 80 lb mix. That is over 3,600 lb of bags to lift and mix by hand. Above about 1 cubic yard, ready-mix delivery is usually cheaper and faster, and it gives a more even pour. For ready-mix quantities, see our concrete calculator.

Concrete Bag Cost

Multiply the number of bags by the price per bag. Prices vary by brand, bag size and store. Enter your local price in the calculator for an estimate.

Tips Before You Buy

  • Buy about 10% extra, and keep unopened bags dry.
  • Measure the thickness at several spots, since uneven ground uses more concrete.
  • Mix a whole bag at a time so the water ratio stays right.
  • Need to work out slabs, walls or columns in cubic yards? Use our full concrete calculator.
  • Building a deck? Our deck calculator covers the boards and joists.

Concrete Bag Calculator FAQs

How many bags of concrete do I need for a 10×10 slab?

About 56 bags of 80 lb mix for a 4-inch slab, or 62 with 10% extra.

How much concrete is in an 80 lb bag?

About 0.60 cubic feet. A 60 lb bag yields about 0.45, a 50 lb bag about 0.375 and a 40 lb bag about 0.30.

How many 80 lb bags of concrete make a yard?

About 45 bags.

How do I figure how many bags of concrete I need?

Find the volume in cubic feet, add 10% for waste, divide by the yield of one bag and round up.

How many bags of concrete do I need for a fence post hole?

About 1.5 bags of 80 lb mix for a 10 × 24 inch hole around a 4×4 post, so plan on 2 bags.

When should I order ready-mix instead of bags?

Above about 1 cubic yard, or roughly 45 bags of 80 lb mix.

Concrete Bag Coverage Chart

Use this chart to compare bag sizes at a glance. One cubic yard is 27 cubic feet, and one 80 lb bag is 0.022 cubic yards.

Bag sizeYield per bag (cu ft)Bags per cubic yardCoverage per bag at 4 in (sq ft)Bags per pallet
40 lb0.30 cu ft900.9 sq ft80
50 lb0.375 cu ft721.1 sq ft64
60 lb0.45 cu ft601.35 sq ft56
80 lb0.60 cu ft451.8 sq ft42

Coverage figures match the yields and coverage already published on this page, including 1.1 sq ft for a 50 lb bag at 4 in thick. Check the yield printed on your bag, because brands vary slightly.

How Many Bags of Concrete Do I Need?

If you are working out how many bags of concrete in a yard, start with the bags of concrete per cubic yard in the chart above, then multiply by your volume in cubic yards and round up to whole bags. The table below does that for common volumes, with no waste added. Add about 10% for waste and uneven ground.

Volume40 lb bags50 lb bags60 lb bags80 lb bags
0.25 cubic yards23181512
0.5 cubic yards45363023
1 cubic yard90726045
2 cubic yards18014412090
3 cubic yards270216180135

For example, 1 cubic yard needs 45 bags of 80 lb mix, and 0.5 cubic yards needs 23 bags of 80 lb mix after rounding up.

Concrete Bag FAQs

How many cubic feet are in an 80-pound bag of concrete?

0.60 cu ft (about 0.022 cubic yards).

How many 60 lb bags of concrete are in a cubic yard?

60 bags.

How many yards does one 80 lb bag of concrete make?

0.022 cubic yards, about 0.022 cubic yards; you need 45 bags for a full yard.

How many 80 lb bags of concrete are on a pallet?

42 bags (60 lb: 56 per pallet).

How much does a cubic yard of concrete cover?

81 sq ft at 4 in thick (54 sq ft at 6 in, 162 sq ft at 2 in).

How many square feet does an 80 lb bag of concrete cover?

About 1.8 sq ft at 4 in thick.

Related calculators: Concrete Calculator, Post Hole Concrete Calculator, Concrete Pad Calculator, and How to Estimate Concrete Yards.

Related calculators: for reinforcement, try the rebar calculator.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators