Start calculating

How much artificial turf do I need?

Last reviewed: November 19, 2026. Formulas checked against standard industry conversions. How we calculate.

Quick answer: A 20 x 30 ft lawn (600 sq ft) needs 2 strips off a 15 ft roll — 40 linear ft of roll and 600 sq ft of turf, or 630 sq ft to order with a 5% waste allowance — with 1 seam. Infill is 1,200 lb (24 x 50-lb bags) and the 3 in base is 7.78 tons. Use the Artificial Turf Calculator to work out the exact amounts for your lawn.

Artificial turf is sold off a roll, usually 15 ft wide, so working out how much you need is not just a matter of square feet. You need to know how many strips your lawn takes, how many linear feet of roll that means, how much is left over as trim, how many bags of infill to hold the blades up, and how much base to put underneath. Get any of those wrong and you either run short mid-install or pay for turf you cut off and throw away. This guide works through all of it, step by step.

How Much Artificial Turf Do I Need?

First, measure the lawn length and width in feet. Strips run along the length, so the number of strips is the width divided by the roll width (15 ft), rounded up. Linear feet of roll = strips x lawn length. Turf square feet = strips x roll width x lawn length. Add 5% for waste and cutting to get the turf to order. Seams = strips – 1, and trim = turf square feet – lawn area. Infill is 2 lb per sq ft of actual lawn area, and the base is 3 in deep at 1.4 tons per cubic yard.

Artificial Turf Calculator Examples

Example 1 — a 20 x 30 ft lawn (600 sq ft): With a 15 ft roll it needs 2 strips, 40 linear ft of roll and 600 sq ft of turf — 630 sq ft to order with a 5% waste allowance — with 1 seam. Infill is 600 x 2 = 1,200 lb, or 24 x 50-lb bags. The 3 in base is 150.00 cu ft = 5.56 cu yd = 7.78 tons.

Example 2 — a 12 x 12 ft lawn (144 sq ft): It needs 1 strip off a 15 ft roll — 15 x 12 ft, or 180 sq ft of turf, with 36 sq ft of trim. Infill is 144 x 2 = 288 lb, or 6 x 50-lb bags. The 3 in base is 36 cu ft = 1.33 cu yd = 1.87 tons.

Example 3 — a 25 x 40 ft lawn (1,000 sq ft): It needs 3 strips, 75 linear ft of roll and 1,125 sq ft of turf — 1,181.25 sq ft to order — with 2 seams and 125 sq ft of trim. Infill is 2,000 lb, or 40 x 50-lb bags. The 3 in base is 250 cu ft = 9.26 cu yd = 12.96 tons.

Turf Strips Off a 15 ft Roll

How many strips you need depends only on the lawn width measured across the roll. A lawn up to 15 ft wide needs a single strip and has no seams at all.

Lawn widthStrips neededSeams
Up to 15 ft10
15–30 ft21
30–45 ft32
45–60 ft43

How Much Infill Do I Need?

Silica sand infill is brushed into the turf to hold the blades upright and weigh the turf down. The usual rate is 2 lb per sq ft, so every 100 sq ft of lawn needs 200 lb of infill — four 50-lb bags. Work infill out on the actual lawn area, not the turf ordered, so you do not pay for infill to cover offcuts.

Lawn areaInfill needed50-lb bags
100 sq ft200 lb4
144 sq ft (12 x 12 ft)288 lb6
600 sq ft (20 x 30 ft)1,200 lb24
1,000 sq ft (25 x 40 ft)2,000 lb40

How Much Base Do I Need Under Artificial Turf?

Turf needs a firm, free-draining base — usually 3 in of compacted crushed stone or decomposed granite at 1.4 tons per cubic yard. Every 100 sq ft of lawn at 3 in deep needs 25 cu ft (0.93 cu yd) of base, or 1.30 tons. A 12 x 12 ft lawn needs 36 cu ft (1.33 cu yd, 1.87 tons), a 20 x 30 ft lawn needs 150 cu ft (5.56 cu yd, 7.78 tons), and a 25 x 40 ft lawn needs 250 cu ft (9.26 cu yd, 12.96 tons). Excavate the old lawn, lay the base, compact it, and check the level before the turf goes down — a soft or uneven base is the most common reason a new turf lawn feels lumpy.

Seams and Trim

Every strip after the first adds one seam, so a lawn that needs 2 strips has 1 seam and a lawn that needs 3 strips has 2. Plan the layout so seams fall where they are least visible — away from the main viewpoint and running the same way as the longest edge. Keep the pile direction the same on every strip or the seams will show as a change in shade. Trim is the turf left over when the roll is wider than the lawn: a 12 x 12 ft lawn cut from a 15 ft roll leaves a 3 ft wide offcut along the full length (36 sq ft), which is often enough to cover a small side strip or a step.

How Much Does Artificial Turf Cost?

Artificial turf prices vary widely by product quality and pile height, so there is no single price per sq ft to quote. Enter your supplier’s price per sq ft in the Artificial Turf Calculator and it will estimate the turf cost on the amount to order, including the waste allowance. Remember to budget separately for infill, base material and edging — on a typical lawn those can add up to as much as the turf itself.

Frequently Asked Questions

How many strips of artificial turf do I need for a 20×30 lawn?

A 20 x 30 ft lawn needs 2 strips off a 15 ft roll — 40 linear ft of roll and 600 sq ft of turf, or 630 sq ft to order with a 5% waste allowance — with 1 seam.

How much infill do I need for artificial turf?

Allow 2 lb of silica sand per sq ft. A 600 sq ft lawn needs 1,200 lb of infill, or 24 x 50-lb bags. A 12 x 12 ft lawn needs 288 lb, or 6 x 50-lb bags. Work infill out on the actual lawn area, not the turf ordered.

How deep should the base be under artificial turf?

Use 3 in of compacted base under artificial turf — usually crushed stone or decomposed granite at 1.4 tons per cubic yard. Every 100 sq ft at 3 in deep needs 25 cu ft (0.93 cu yd) of base, or 1.30 tons.

How much artificial turf do I need for a 12×12 area?

A 12 x 12 ft lawn needs 1 strip off a 15 ft roll — 15 x 12 ft, or 180 sq ft of turf, with 36 sq ft of trim. Infill is 288 lb, or 6 x 50-lb bags, and the 3 in base is 36 cu ft = 1.33 cu yd = 1.87 tons.

Ready to work out your exact amounts? Use the Artificial Turf Calculator — enter your lawn length and width and it gives you strips, linear feet, turf to order, seams, infill bags and base tons. Comparing lawn options? Try the Sod Calculator or the Grass Seed Calculator.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators