Start calculating

River Rock Calculator

Last reviewed: November 2, 2026. Formulas checked against standard industry conversions. How we calculate.

Use this free river rock calculator to estimate how many cubic yards, cubic feet, tons and bags of river rock you need for garden beds, dry creek beds, drainage edges and paths. Enter your measurements, choose a river rock size, and get an instant estimate in cubic yards, cubic feet and tons, with an optional cost estimate.

River Rock Calculator

Enter your measurements below. Results update when you change a value, or press Calculate.

Cubic yards needed: – cu yd

Cubic feet: – cu ft

Tons needed: – tons

0.5 cu ft bags needed: – bags

Estimated cost: Enter a price per ton to see cost.

Estimates vary with actual density, moisture and compaction. One 0.5 cu ft bag holds about 0.5 cubic feet of river rock.

How Much River Rock Do I Need?

For a rectangular area, use this simple formula: square feet × depth in inches ÷ 324 = cubic yards. For a circular area, first work out the area in square feet (3.14 × radius × radius), then apply the same formula. Add a waste allowance, usually 10 percent, for uneven ground, settling and spillage.

Worked example: a 100 sq ft bed at 3 in deep needs 100 × 3 ÷ 324 = 0.93 cu yd, which is about 1.30 tons at the standard river rock density of 1.40 tons per cubic yard.

River Rock Coverage Calculator

Use this river rock coverage calculator table to plan how far one ton goes at the standard density of 1.40 tons per cubic yard. One ton is about 0.71 cubic yards, so coverage falls as depth rises.

DepthCoverage per ton
2 inAbout 116 sq ft
3 inAbout 77 sq ft
4 inAbout 58 sq ft

These are planning figures for a flat, even layer. Uneven ground, larger rock and settling will reduce coverage.

River Rock Sizing Guide

Choose the size for the job, not just the look. Small river rock, under 1 inch, suits garden beds and neat edging where a smooth, even surface matters. Medium river rock, 1 to 3 inches, is a good all-round choice for garden beds, paths and areas around stepping stones. Large river rock, 3 to 6 inches, suits dry creek beds and drainage edges, where bigger stones stay in place and water can move between them.

Depth rule: lay river rock about twice as deep as the rock’s diameter, so 1-2 in rock wants 3-4 in depth. A layer that is too thin leaves gaps and shows the ground beneath, while a much deeper layer can shift underfoot.

How Much Does a Cubic Yard of River Rock Weigh?

A cubic yard of river rock weighs about 2,700-2,900 lb. At the site’s standard density of 1.40 tons per cubic yard, that is about 2,800 lb. Confirm the supplier’s figure before ordering, because size, moisture and grading change the weight.

Frequently Asked Questions

How much river rock do I need?

Measure length and width, or diameter for a circle, choose a depth, and use the calculator above. As a check, multiply square feet by depth in inches and divide by 324 to get cubic yards, then add about 10 percent for waste.

How much does a ton of river rock cover?

At the standard density, one ton covers about 116 sq ft at 2 in deep, about 77 sq ft at 3 in deep, and about 58 sq ft at 4 in deep. Deeper layers and larger rock reduce coverage.

How deep should river rock be?

As a rule, lay river rock about twice as deep as the rock’s diameter, so 1-2 in rock wants 3-4 in depth. Garden beds often work well at 3 in, while dry creek beds and drainage edges may need a deeper layer of larger rock.

River rock vs pea gravel — which should I choose?

Choose river rock for a bolder, decorative look, for dry creek beds and for drainage edges where larger, rounded stones stay put. Choose pea gravel for a smoother, walkable surface on paths and patios. For pea gravel quantities, use the Gravel Calculator.

Related Calculators

Related calculators

For a smaller, smoother stone, try the pea gravel calculator.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators