Last reviewed: November 4, 2026. Formulas checked against standard industry conversions. How we calculate.
Build a gravel driveway in three layers: a base of #3 stone or crusher run, a middle layer of #57 stone, and a surface layer of #21A (or #57), for a total depth of 6-9 inches. Compact each layer before adding the next.
Best Gravel for a Driveway: Types, Layers and How Much You Need
When you compare gravel driveway options, look first at how each stone behaves under tyres. Angular crushed stone locks together when it is compacted, so it stays put and spreads the load. Round stone, by contrast, rolls and shifts. The recommended gravel for driveway surfaces is therefore angular, well-graded stone, with the coarsest stone at the bottom and the finest, most tightly locking stone on top.
The Short Answer: What Gravel Is Best for a Driveway?
For the base, use #3 stone or crusher run. For the middle layer, use #57 stone. For the top or surface layer, use #21A, which contains stone dust fines that compact and lock, or pea gravel if looks matter most. Pea gravel shifts under tyres, so it is better for decorative or low-traffic areas than for a main driving surface. Angular crushed stone beats round stone because it locks together instead of rolling apart.
Driveway Gravel by Layer
Each layer has a different job, so each needs a different stone. Use the Crushed Stone Calculator to estimate these stone types for your own measurements.
| Layer | Best gravel | Size | Typical depth |
|---|---|---|---|
| Base | #3 crushed stone or crusher run | 1-2 in stones | 4 in |
| Middle | #57 stone | about 3/4 in | 2-3 in |
| Top | #21A crusher run fines or pea gravel | 3/8-1/2 in | 2 in |
Gravel Driveway Options Compared
Crusher run is the best all-round choice. It is a mix of crushed stone and fines that compacts hard into a firm, stable surface, which is why it works well as a base and, in its #21A form, as a top layer.
#57 stone is clean, angular stone about 3/4 in across. It drains well because it has few fines, so it suits the middle layer and drainage areas, but on its own it does not lock as tightly as a fines mix.
Pea gravel looks attractive and feels comfortable underfoot, but its small, round stones shift under tyres and can scatter. Keep it as a thin decorative top or for low-traffic areas, not as the main driving surface.
River rock is decorative. Its smooth, round stones look good in beds and borders, but they are a poor choice for a driving surface because they move, do not compact, and can be difficult to walk or drive on.
Recycled crushed concrete is a budget option and makes a decent base. It compacts reasonably well and costs less than quarried stone, although its size and quality can vary more from load to load.
How Much Gravel Do You Need for a Driveway?
Use this formula: length x width x depth in feet / 27 = cubic yards; tons = yards x density about 1.35-1.45.
Worked example: a 12 x 50 ft driveway (600 sq ft). For the base, 4 in of crusher run = 200 cu ft = 7.4 cu yd = about 10.7 tons at 1.45 t/yd. For the top, 2 in of #57 = 100 cu ft = 3.7 cu yd = about 5 tons at 1.35 t/yd.
What Does Driveway Gravel Cost?
Prices vary by region, so treat these as planning ranges, not quotes. Because a driveway is built from crushed stone, budget on the crushed-stone range: about $25-$68 per ton picked up at the yard (roughly $34-$95 per cubic yard) across the contiguous US, with generic gravel at about $28-$75 per ton — see our landscaping material prices by state page for the range in your state. Delivery commonly adds about $50-$150 per load depending on distance. A “load” from a dump truck is often 10-14 tons. For a fuller breakdown by stone type, delivery, and project size, see Gravel Prices in 2026: Cost Per Ton, Per Yard & Per Load.
Driveway Gravel FAQs
What is the recommended gravel for a driveway?
A layered build: a coarse base of #3 stone or crusher run, a middle layer of #57 stone, and a top layer of #21A fines that compact and lock, with pea gravel only as a decorative or low-traffic alternative.
How deep should gravel be on a driveway?
Total depth is about 6-9 in across layers, with the base about 4 in. Top-ups are thinner, since they only replace what has worn, washed away, or been pressed into the layers below.
How much does one ton of gravel cover?
About 77 sq ft at 3 in deep for typical crushed stone at 1.4 t/yd (1 ton = 0.71 cu yd = 19.3 cu ft; 19.3 / 0.25 ft = 77 sq ft); about 115 sq ft at 2 in, 58 at 4 in.
Is pea gravel good for a driveway?
It looks good but its round stones shift, so it is best as a thin decorative top or in low-traffic areas. Angular stone is better for the driving surface.
How much is a load of gravel?
It depends on truck size, often 10-14 tons, and on the material. Use the price ranges in the cost section above, and add delivery for a delivered total.
Related Reading and Tools
Gravel Driveway Calculator: Figure Your Layers in Minutes
When you are figuring gravel for driveway projects, start with the 3-layer method: measure the length and width, then work out each layer separately, because the base, middle and top layers use different stone and different depths. A coarse base spreads the load, a middle layer adds strength and drainage, and a finer top layer locks together to give a firm driving surface. A gravel driveway calculator saves you doing each layer by hand, but the method stays the same: area times depth for each layer, converted to cubic yards, then to tons using the stone density.
Run the numbers with the tools made for each step: use the Gravel Calculator for your overall driveway size, the Crushed Stone Calculator for the crushed-stone layers, and the Cubic Yards to Tons converter to turn cubic yards into tons before you order.
How do I figure gravel for a driveway?
Measure length times width, then calculate each of the three layers separately using its own depth: length times width times depth in feet, divided by 27, gives cubic yards for that layer. For example, the worked example above for a 12×50 ft driveway gives a base layer of 7.4 cubic yards (10.7 tons) and a top layer of 3.7 cubic yards (5 tons).
Driveway Gravel Compared: Types, Sizes, Drainage and Cost
The sections above describe each stone in turn. This table puts the realistic driveway candidates side by side, so you can match a stone to a layer at a glance. Sizes and layer roles follow the layer guide on this page; costs are the US ranges from our landscaping material prices by state page, before delivery.
| Gravel type | Typical size | Best layer / use | Drainage | Locks and compacts | Cost per ton |
|---|---|---|---|---|---|
| Crusher run (#21A) | Stone dust to about 3/4 in, mixed | Base and top | Fair — fines fill the gaps | Excellent — compacts the hardest | $25–$68 |
| #3 crushed stone | 1–2 in | Base | Excellent | Good under compaction, too coarse to drive on | $25–$68 |
| #57 stone | About 3/4 in | Middle and top | Excellent | Good — angular edges lock | $25–$68 |
| Crushed concrete (recycled) | About 3/4–1 1/2 in, varies by load | Base (budget option) | Good | Good | Often the lowest priced |
| Pea gravel | About 3/8 in, round | Decorative top only | Excellent | Poor — rolls and shifts under tyres | $28–$75 |
| River rock | 1–3 in, round | Decorative only — not a driving surface | Excellent | Poor — does not compact | Varies (decorative stone) |
Two patterns decide almost every driveway: angular stone with fines (crusher run) locks into the firmest surface, and clean angular stone (#57, #3) drains the fastest. Round stone drains well too, but it never locks, which is why it belongs in beds and borders rather than under tyres. To price a specific stone for your own measurements, run it through the Crushed Stone Calculator.
How Deep Should Driveway Gravel Be? Depth by Soil and Traffic
The standard build on this page totals 6–9 in: about 4 in of base, 2–3 in of middle stone and 2 in of top stone. That assumes firm ground and ordinary cars. Adjust the total depth to your ground and your vehicles:
| Situation | Total depth | What changes |
|---|---|---|
| Cars on firm, dry, well-drained soil | 6–9 in | The standard three-layer build above |
| Clay, soft or wet ground | 9–12 in | Thicker base (6 in or more of #3 stone or crusher run), and lay geotextile fabric under the base so the stone does not sink into the soil — see the fabric step in our guide on how to build a gravel driveway |
| Trucks, RVs or regular delivery vehicles | 10–12 in | Base up to 6–8 in of #3 stone or crusher run; keep the top layer at about 2 in |
| Refreshing a sound existing driveway | 1–2 in | Top-layer stone only — see the top-up question below |
Depth is the input that changes your order the most: every extra inch over a 600 sq ft driveway adds about 1.85 cubic yards of stone, roughly 2.6 tons. That is why the layers are worth working out separately instead of guessing a single total.
Worked Example: Gravel for a 12 × 50 ft Driveway, Layer by Layer
The shorter example earlier on this page prices the base and the top. Here is the same standard 12 × 50 ft driveway (600 sq ft) worked through all three layers, using the per-stone densities from our Crushed Stone Calculator:
| Layer | Stone | Depth | Volume | Density | Tons |
|---|---|---|---|---|---|
| Base | Crusher run | 4 in | 7.4 cu yd | 1.45 t/cu yd | 10.7 |
| Middle | #57 stone | 3 in | 5.6 cu yd | 1.35 t/cu yd | 7.5 |
| Top | #21A crusher run fines | 2 in | 3.7 cu yd | 1.45 t/cu yd | 5.4 |
| Total | — | 9 in | 16.7 cu yd | — | About 23.6 |
Order about 26 tons once you add the usual 10% allowance for compaction and spillage — the same allowance the Gravel Calculator applies by default. Cross-check: run the full 9 in through that calculator at its standard 1.40 t/cu yd and you get about 23.3 tons; the small difference is just the per-stone densities above. (If you finish with #57 on top instead of #21A, the top layer is about 5.0 tons, as in the earlier example.) At the crushed stone range of $25–$68 per ton, 23.6 tons is roughly $590–$1,600 of stone before delivery; delivery typically adds $50–$150 per load.
More Driveway Gravel Questions
How many tons of gravel do I need for a 12 × 50 ft driveway?
About 23.6 tons for a full three-layer build (16.7 cubic yards): roughly 10.7 tons of crusher run for the 4 in base, 7.5 tons of #57 stone for the 3 in middle layer, and 5.4 tons of #21A for the 2 in top layer. Order about 26 tons to include a 10% allowance for compaction and spillage.
What size gravel is best for a driveway surface?
About 3/4 in angular crushed stone is the standard surface size: #57 stone (about 3/4 in), or a #21A fines mix that compacts into a firm top. Save the big 1–2 in #3 stone for the base, and keep small round pea gravel (about 3/8 in) for decorative, low-traffic areas, because it shifts under tyres.
What is the cheapest gravel for a driveway?
Crusher run is usually the cheapest stone that still performs, and recycled crushed concrete is often priced lower again where it is available. On our prices page, crushed stone runs about $25–$68 per ton before delivery, while decorative gravel such as pea gravel costs more and performs worse as a driving surface.
Can I put new gravel on top of an existing gravel driveway?
Yes, if the base is still sound. Rake out ruts and low spots, then add 1–2 in of top-layer stone (#21A or #57). On a 12 × 50 ft driveway, a 2 in refresh is about 3.7 cubic yards, roughly 5.4 tons of #21A. If the driveway is muddy, deeply rutted or holding water, fix the base and drainage first — fresh stone over a failed base just sinks.
#57 or #21A: which is better for the top layer?
#21A compacts tighter, because its stone dust fills the gaps, giving a firmer, more finished surface. #57 is clean stone with no fines, so it drains faster and stays cleaner in wet spots and on slopes. Both are angular and lock far better than round stone: pick #21A for firmness, #57 for drainage.