Start calculating

How much does a concrete driveway cost?

Last reviewed: November 14, 2026. Formulas checked against standard industry conversions. How we calculate.

Quick answer: A concrete driveway typically costs $8–$15 per square foot installed for a plain 4-inch driveway. A 1-car driveway (12×20 ft, 240 sq ft) runs about $1,920–$3,600 installed, and a 2-car driveway (20×20 ft, 400 sq ft) runs about $3,200–$6,000 installed. Materials-only concrete runs roughly $125–$150 per cubic yard, plus delivery.

Use the Concrete Calculator to work out the volume for your own driveway, then multiply by the installed price per square foot below.

How much does a concrete driveway cost per square foot?

For a plain, broom-finished 4-inch driveway, expect $8–$15 per square foot installed in most regions. That price usually covers the concrete, labor, forms, and a basic finish. Thicker slabs, decorative finishes, removal of an old driveway, grading, reinforcement, and permits all push the price up. Materials-only concrete is roughly $125–$150 per cubic yard, plus a delivery fee, so the concrete itself is only part of the installed price — labor, prep, and finishing make up the rest.

Worked examples

1-car driveway: 12×20 ft at 4 inches

A 12-by-20-foot driveway is 240 square feet. At 4 inches thick, the volume is 240 x 4 / 12 = 80 cubic feet, or 2.96 cubic yards. Installed at $8–$15 per square foot, that is about $1,920–$3,600. Materials-only, the concrete is 2.96 cubic yards at roughly $125–$150 per cubic yard, or about $370–$444, plus delivery.

2-car driveway: 20×20 ft at 4 inches

A 20-by-20-foot driveway is 400 square feet. At 4 inches thick, the volume is 400 x 4 / 12 = 133.33 cubic feet, or 4.94 cubic yards. Installed at $8–$15 per square foot, that is about $3,200–$6,000. The concrete weighs 133.33 x 150 = 20,000 lb, or 10 US tons — see the Concrete Weight Calculator. Materials-only, the concrete is 4.94 cubic yards at roughly $125–$150 per cubic yard, or about $618–$741, plus delivery.

Larger driveway: 24×24 ft

A 24-by-24-foot driveway is 576 square feet. At 4 inches thick, the volume is 576 x 4 / 12 = 192 cubic feet, or 7.11 cubic yards, and the installed cost is about $4,608–$8,640. At 6 inches thick, the volume is 576 x 6 / 12 = 288 cubic feet, or 10.67 cubic yards, and the installed cost is about $5,760–$10,368 at $10–$18 per square foot.

Concrete driveway cost by thickness and finish

Installed prices per square foot. Stamped concrete adds roughly $5–$8 per square foot over plain concrete, and exposed aggregate adds roughly $3–$5 per square foot.

Finish4 inches6 inches
Plain concrete$8–$15$10–$18
Brushed finish$9–$16$11–$19
Stamped concrete$13–$23$15–$26
Exposed aggregate$11–$20$13–$23

A 6-inch slab uses 50% more concrete than a 4-inch slab of the same size, so it costs more in materials and labor. It is worth it for heavy vehicles, RV parking, or poor soil. For a normal passenger-car driveway, 4 inches with reinforcement is the usual choice.

Materials-only vs installed cost

Materials-only concrete is roughly $125–$150 per cubic yard, plus delivery. For the 2-car driveway above, 4.94 cubic yards costs about $618–$741 in concrete alone. The installed price of $3,200–$6,000 also covers site prep, forms, reinforcement, pouring, finishing, curing, and cleanup. Delivery is often a separate charge, and small orders can carry a short-load fee — see How Many Yards of Concrete Are in a Truck?

What drives the cost up?

  • Removal: tearing out and hauling away an old driveway adds $1–$3 per square foot or more.
  • Grading and base: poor soil, slopes, or a deep gravel base add prep time and material.
  • Reinforcement: rebar or wire mesh costs more than plain concrete but resists cracking.
  • Finish: stamped, colored, or exposed aggregate finishes add $3–$8 per square foot.
  • Permits: some cities require a permit for a new or widened driveway.
  • Short-load fees: orders under about 4–5 cubic yards often carry a $100–$200+ short-load fee.
  • Access: tight sites, long wheelbarrow runs, or pumping concrete add labor.

How to estimate your driveway cost

  1. Measure the area: length x width in feet, in square feet.
  2. Work out the volume: area x thickness / 12 = cubic feet, then divide by 27 for cubic yards. The Concrete Calculator does this for you.
  3. Multiply by the installed price: area x $8–$15 per square foot for a plain 4-inch driveway.
  4. Add extras: removal, grading, reinforcement, permits, and delivery or short-load fees.
  5. Get quotes: prices vary by region and supplier, so compare at least two local quotes before booking.

Frequently asked questions

How much does a concrete driveway cost per square foot?

A plain 4-inch concrete driveway typically costs $8–$15 per square foot installed. A 6-inch slab costs about $10–$18 per square foot, and decorative finishes add $3–$8 per square foot.

How many cubic yards of concrete do I need for a 2-car driveway?

A 20-by-20-foot driveway at 4 inches thick needs 4.94 cubic yards. Order a little extra for waste and uneven ground — most suppliers round up to the next half yard, so plan on about 5 cubic yards. See How Many Yards of Concrete Are in a Truck? for delivery sizes.

How thick should a concrete driveway be?

Four inches is standard for passenger cars. Use 5–6 inches for heavy vehicles, RVs, or poor soil, and add rebar or wire mesh for crack resistance.

How long does a concrete driveway last?

A well-built concrete driveway lasts 25–30 years or more with sealing every few years and prompt repair of cracks.

Related: Concrete Calculator, Concrete Bag Calculator, Concrete Weight Calculator. For prices in your area, see the Landscaping Material Prices by State page.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators