Last reviewed: November 13, 2026. Formulas checked against standard industry conversions. How we calculate.
Masonry Sand Calculator
For a 10 x 10 ft area at 2 inches deep with 10% waste, you need 18.33 cu ft of masonry sand: 0.68 cu yd, 0.92 tons, 1,833 lb, or 37 fifty-pound bags, costing about $36.67 at $40 per ton. Enter your measurements below for exact quantities.
- Volume–
- Cubic yards–
- Weight (tons)–
- Weight (lb)–
- 50 lb bags (exact)–
- Estimated cost–
Results update as you type. Masonry sand weighs 100 lb per cu ft (2,700 lb per cu yd).
How to Calculate Masonry Sand
- Multiply length by width (in feet) by depth (in inches, divided by 12) to get cubic feet.
- Add waste: multiply by 1.10 for the standard 10%.
- Divide cubic feet by 27 to get cubic yards.
- Multiply cubic yards by 1.35 to get tons (masonry sand is 2,700 lb, or 1.35 tons, per cubic yard).
- Divide the weight in pounds by 50 to get 50 lb bags, and round up when buying.
- Multiply tons by your price per ton to get the estimated cost.
Masonry sand is finer than paver or joint sand. It is made for brick and block laying and for mixing mortar: the fine, even grains pack smoothly into joints and make a workable mortar. Do not use coarse paver sand in mortar, and do not use masonry sand to fill paver joints.
Masonry Sand Worked Examples
Example 1: 10 x 10 ft at 2 inches deep, 10% waste, $40 per ton
Volume = 10 x 10 x 2 / 12 x 1.10 = 18.33 cu ft, or 0.68 cu yd. Weight = 18.33 x 100 = 1,833 lb, or 0.92 tons. Bags = 1,833 / 50 = 36.67, so buy 37 fifty-pound bags. Cost = 0.92 x $40 = $36.67.
Example 2: 20 x 30 ft at 3 inches deep, 10% waste, $40 per ton
Volume = 20 x 30 x 3 / 12 x 1.10 = 165.00 cu ft, or 6.11 cu yd. Weight = 165.00 x 100 = 16,500 lb, or 8.25 tons. Bags = 16,500 / 50 = 330, so buy 330 fifty-pound bags. Cost = 8.25 x $40 = $330.00.
How Much Area Does One Ton of Masonry Sand Cover?
One ton of masonry sand is 20 cu ft. Coverage per ton, before waste:
| Depth | Area covered by 1 ton | Area covered by 1 cu yd (1.35 tons) |
|---|---|---|
| 2 in | 120 sq ft | 162 sq ft |
| 3 in | 80 sq ft | 108 sq ft |
| 4 in | 60 sq ft | 81 sq ft |
| 6 in | 40 sq ft | 54 sq ft |
Add 10% waste on top of these figures for spillage and uneven ground.
Masonry Sand Weight and Bag Counts
| Amount | Weight | 50 lb bags |
|---|---|---|
| 1 cu ft | 100 lb | 2 |
| 1 cu yd | 2,700 lb (1.35 tons) | 54 |
| 1 ton | 2,000 lb | 40 |
Masonry Sand vs Paver Sand
Masonry sand is finer than paver and joint sand, and the two are not interchangeable:
- Masonry sand: fine, even grains for brick and block laying and for mixing mortar. It spreads smoothly and bonds well.
- Paver sand (joint sand): coarser grains that lock pavers together and resist washing out of joints.
- Using coarse paver sand in mortar gives a harsh, hard-to-work mix. Using fine masonry sand in paver joints means the joints wash out faster.
Tips for Buying Masonry Sand
- For anything over about 1 cubic yard, bulk delivery is usually much cheaper per ton than 50 lb bags.
- Keep the 10% waste allowance, and use 15% on uneven ground or for first-time bricklayers.
- Order mortar sand and bedding sand separately if your supplier lists them: they are graded differently.
- Cover bulk sand with a tarp if it will sit for more than a day: rain adds weight and changes your mortar mix.
- For a full materials list, check the Sand Calculator for general sand volumes and the Brick Calculator for brick and mortar quantities.
Related Calculators
Working on a bigger project? Try the Sand Calculator for general sand volumes, the Paver Sand Calculator for joint sand, and the Brick Calculator for bricks, blocks and mortar.
Masonry Sand Calculator FAQs
How much masonry sand do I need for a 10×10 area 2 inches deep?
With 10% waste, a 10 by 10 ft area at 2 inches deep needs 18.33 cu ft of masonry sand: 0.68 cu yd, 0.92 tons, 1,833 lb. Buy 37 fifty-pound bags, costing about $36.67 at $40 per ton.
How many tons of masonry sand are in a cubic yard?
One cubic yard of masonry sand weighs 2,700 lb, or 1.35 tons, at the standard density of 100 lb per cubic foot.
How many 50 lb bags of masonry sand make a ton?
40 fifty-pound bags make one ton of masonry sand (2,000 lb divided by 50 lb per bag).
What is masonry sand used for?
Masonry sand is used for laying brick and block and for mixing mortar. It is finer than paver or joint sand, so it packs smoothly into joints and makes a workable mortar.
Is masonry sand the same as paver sand?
No. Masonry sand is finer and made for mortar and brick laying. Paver sand (joint sand) is coarser and made to lock pavers together. Do not swap them.
How much does masonry sand cost per ton?
Prices vary by region, but at $40 per ton a 20 by 30 ft area at 3 inches deep needs 8.25 tons and costs $330.00. Bulk delivery is usually cheaper per ton than bags.