Last reviewed: November 11, 2026. Formulas checked against standard industry conversions. How we calculate.
Last reviewed: November 11, 2026. Formulas checked against standard industry conversions. How we calculate.
Quick answer: A 10 × 10 ft area at 2 in deep needs about 0.62 cubic yards of stone dust — about 0.83 tons, or 37 bags of 50 lb with a 10% waste allowance — costing about $37 at $40 per ton. Stone dust is much heavier than it looks: one cubic yard weighs about 2,700 lb (1.35 tons).
Use this free stone dust calculator to work out how much stone dust you need for paver bedding, levelling low spots and pathways. Enter the area and depth, choose a waste allowance, and adjust the price per ton if you have a local quote. The calculator shows cubic feet, cubic yards, tons, the number of 50 lb bags to buy, and the estimated cost.
Stone Dust Calculator
Enter your measurements below. Results update when you change a value, or press Calculate.
- Cubic feet: –
- Cubic yards: –
- Weight: –
- 50 lb bags to buy: –
- Estimated cost: –
Density used: 1 cubic yard of stone dust = 2,700 lb = 1.35 tons. One 50 lb bag holds about 0.5 cubic feet. Bag counts include your waste allowance and are rounded up.
Estimates only. Prices vary by supplier and delivery area — see below.
How We Calculate Stone Dust
Cubic feet equals length times width times depth in feet (depth in inches divided by 12). Cubic yards equals cubic feet divided by 27. Weight equals cubic yards times 1.35 tons, because one cubic yard of stone dust weighs about 2,700 lb. Bags equal cubic feet (with your waste allowance) divided by 0.5, rounded up to whole bags — one 50 lb bag holds about 0.5 cubic feet. Cost equals buy tons times the price per ton.
Stone dust is crushed stone screened down to fine, angular particles, usually under 1/4 in. Because the particles are angular, they lock together and compact into a hard, stable layer — which is why stone dust is a bedding and levelling material, not a loose decorative stone.
Stone Dust Coverage: How Much per 100 Sq Ft
Use this table to estimate stone dust for a 100 sq ft area at common depths. Bags are 50 lb bags, rounded to whole bags, before any waste allowance.
| Depth | Cubic feet | Cubic yards | Tons | 50 lb bags |
|---|---|---|---|---|
| 2 in | 16.67 | 0.62 | 0.83 | 33 |
| 3 in | 25 | 0.93 | 1.25 | 50 |
| 4 in | 33.33 | 1.23 | 1.67 | 67 |
When you order, round up to whole bags or to the nearest half cubic yard — it is better to have a little extra than to run short mid-project.
Worked Examples
Example 1 — 10 ft by 10 ft area at 2 in deep, 10% waste, $40 per ton: Cubic feet is 10 times 10 times 2 divided by 12, or 16.67. Cubic yards is 16.67 divided by 27, or 0.62. Tons is 0.62 times 1.35, or 0.83. Bags is 16.67 times 1.10 divided by 0.5, or 36.67, rounded up to 37. Cost is 0.83 times 1.10 times $40, or $36.67.
Example 2 — 20 ft by 30 ft area at 3 in deep, 10% waste, $40 per ton: Cubic feet is 20 times 30 times 3 divided by 12, or 150. Cubic yards is 150 divided by 27, or 5.56. Tons is 5.56 times 1.35, or 7.50. Bags is 150 times 1.10 divided by 0.5, or 330. Cost is 7.50 times 1.10 times $40, or $330.00.
Stone Dust vs Paver Sand
Stone dust and paver sand do different jobs on the same patio. Stone dust goes under the pavers: a 1 in screeded bedding layer, or a 2 to 3 in levelling layer over the compacted base, where its angular fines lock together and hold the pavers level. Paver sand goes between the pavers: joint sand or polymeric sand swept into the gaps after laying, to lock the pavers together and keep weeds out. Do not use stone dust as joint filler — it washes out of joints and can stain light pavers. Use our paver sand calculator for the joint sand, and the paver base calculator for the aggregate base underneath.
How Deep Should Stone Dust Be?
For paver bedding, use a 1 in layer of stone dust, screeded level over a compacted base — the same rule as sand bedding. For pathways, 2 to 3 in compacted gives a firm walking surface. For levelling low spots in a yard, spread it in 1 to 2 in lifts and compact each lift before adding the next; a single deep, uncompacted layer settles unevenly. Stone dust is not a driveway surface on its own — for that, use road base or crushed stone (see the road base calculator and crushed stone calculator).
Frequently Asked Questions
How much stone dust do I need for 100 sq ft?
At 3 in deep, 100 sq ft needs about 0.93 cubic yards (1.25 tons), or 50 bags of 50 lb. At 2 in deep it is 0.62 cubic yards and 33 bags; at 4 in deep it is 1.23 cubic yards and 67 bags. Add about 10% for waste on uneven ground.
How much does a cubic yard of stone dust weigh?
About 2,700 lb, or 1.35 tons. Stone dust is a dense, fine material — roughly the same weight per yard as crushed stone, and much heavier than the same volume of mulch or lava rock.
How many 50 lb bags of stone dust are in a cubic yard?
There are 54 bags in a cubic yard when each 50 lb bag holds about 0.5 cubic feet: 27 cubic feet divided by 0.5 cubic feet = 54 bags. The calculator above rounds bag counts up, so you do not come up short.
Stone dust vs paver sand — which should I use under pavers?
Use stone dust (or concrete sand) as the 1 in bedding layer under pavers, and paver sand as the joint filler between them. They are different materials for different layers of the same patio.
How deep should stone dust be under pavers?
One inch, screeded level, over a compacted base. A thicker bedding layer can settle unevenly under the pavers, so keep it thin and level.
Should I buy stone dust in bags or in bulk?
Buy bags for small jobs — a few bags are easy to carry and there is no delivery fee. Buy bulk by the cubic yard for anything over about one cubic yard: bulk is much cheaper per yard, and at $40 per ton a 20 by 30 ft area at 3 in deep costs about $330 in stone.
Related Calculators
- Paver Sand Calculator — joint sand and bedding sand for pavers
- Paver Base Calculator — aggregate base under pavers
- Crushed Stone Calculator — cubic yards and tons for crushed stone
- Sand Calculator — cubic yards, tons and bags for sand
- Rock Calculator — cubic yards and tons for any rock or stone
Last updated: November 2026.