Start calculating

Last reviewed: November 10, 2026. Formulas checked against standard industry conversions. How we calculate.

Dry Well Calculator

Use this dry well calculator to size a gravel dry well (soakaway pit) for a roof or paved area. Enter the drainage area and the design storm depth, and it works out the storage volume in gallons, the gravel pit size, the gravel needed in cubic yards, and how many manufactured dry well units would hold the same volume.

Dry Well Size Calculator

Roof area, driveway or other paved area draining to the dry well.
Required storage–
Gravel needed–
Manufactured dry-well units–
Estimated gravel cost–

How to Calculate Dry Well Size

A dry well must store the runoff from the design storm, so the first step is the runoff volume. One square foot of roof with one inch of rain produces about 0.623 gallons of water. The formula is: Storage (gallons) = drainage area (sq ft) x storm depth (in) x 0.623.

A gravel pit does not hold water in its full volume. Only the gaps between the stones count, and clean washed gravel has a void ratio of about 0.4, so 40% of the pit volume is usable storage. That gives the pit volume: Pit volume (cu ft) = storage (gallons) / 7.48052 / 0.4, and the gravel needed is the same pit volume, converted to cubic yards. In practice the pit is usually a square or rectangular excavation lined with landscape fabric, filled with washed gravel, and wrapped over the top.

Worked Example: 1,000 Sq Ft Roof, 2-Inch Storm

For a 1,000 sq ft roof and a 2-inch design storm: 1,000 x 2 x 0.623 = 1,246 gallons of storage. That is 1,246 / 7.48052 = 167 cu ft of water, so at a 0.4 void ratio the pit needs 167 / 0.4 = 417 cu ft, which is 417 / 27 = 15.4 cubic yards of gravel. At 4 ft deep, a square pit would be about 10.5 ft x 10.5 ft. The manufactured alternative is 1,246 / 50 = 25 dry-well units of about 50 gallons each, wrapped in fabric and connected in series.

Dry Well Sizing Table: Roof Area x Storm Depth

Required storage in gallons. Divide by 50 for the number of manufactured 50-gallon units.

Drainage area1-inch storm2-inch storm3-inch storm
500 sq ft312 gal623 gal935 gal
1,000 sq ft623 gal1,246 gal1,869 gal
1,500 sq ft935 gal1,869 gal2,804 gal
2,000 sq ft1,246 gal2,492 gal3,738 gal

FAQs

How big should a dry well be?

Size it from the drainage area and the design storm, not from a rule of thumb. Multiply the area in square feet by the storm depth in inches and by 0.623 to get the gallons to store, then allow for the 0.4 void ratio of the gravel. A 1,000 sq ft roof in a 2-inch storm needs about 1,246 gallons of storage, or about 15.4 cubic yards of gravel in a pit.

How many gallons does a dry well hold?

A single manufactured dry-well unit typically holds about 50 gallons. A gravel pit holds about 3 gallons per cubic foot of pit (0.4 x 7.48 gallons per cubic foot). A 10 ft x 10 ft x 4 ft gravel pit holds roughly 1,197 gallons.

What is the void ratio of dry well gravel?

Clean, washed, uniformly sized gravel such as 3/4-inch or 1-1/2-inch stone has a void ratio of about 0.4, meaning 40% of the pit volume is empty space that can hold water. Rounded river rock is similar. Crushed stone with fines packs tighter and holds less water, so it should not be used for the storage layer.

How deep should a dry well be?

Most residential dry wells are 3 to 4 ft deep, with the bottom at least 2 ft above the seasonal high water table and at least 10 ft from a house foundation. The inlet pipe should enter near the top so sediment settles in the pipe or a catch basin before it reaches the pit.

Do dry wells need gravel, or can I use manufactured units?

Either works. A gravel pit is simple and cheap but needs a large excavation because only 40% of its volume stores water. Manufactured plastic dry-well units store close to 100% of their volume, so the excavation is much smaller, and units can be linked together to reach the required gallons. Both types should be wrapped in landscape fabric to keep soil out.

How long does a dry well last, and how do I maintain it?

A well-built gravel dry well lasts 20 to 30 years or more. The main cause of failure is silt clogging the fabric and the stone. Keep gutters clean, fit a leaf filter or catch basin on the inlet, and check after heavy rain that the pit drains within 48 to 72 hours. If water stands longer, the fabric or the soil interface is clogged.

Related Calculators

Last reviewed: November 2026

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators