Start calculating

Last reviewed: November 9, 2026. Formulas checked against standard industry conversions. How we calculate.

Crushed Stone Calculator

Use this free crushed stone calculator — also a crushed rock calculator — to estimate how many cubic yards and tons of crushed stone you need for driveways, drainage, bases and landscaping. Enter your length, width and depth, choose a stone type, and get an instant estimate in cubic yards and tons, with an optional cost estimate.

Crushed Stone Calculator

Enter your measurements below. Results update when you change a value, or press Calculate.

Cubic yards needed–
Tons needed–
Estimated cost$0.00

Cubic feet and waste allowance are included in the results above. Enter a price per ton to see an estimated cost; otherwise the cost shows $0.00.

How the Crushed Stone Calculator Works

First, the calculator finds the volume of the area: volume in cubic feet = length (ft) × width (ft) × (depth in inches ÷ 12). Next, it converts cubic feet to cubic yards by dividing by 27. Then it converts cubic yards to tons by multiplying by the selected stone type’s weight per cubic yard. Finally, the waste allowance multiplies the final cubic yards and tons, so you order a little extra for uneven ground, settling and spillage.

Worked example: A 10 × 10 ft area at 3 in deep with #57 stone gives 10 × 10 × (3 ÷ 12) = 25 cu ft, which is 25 ÷ 27 = 0.93 cu yd, and 0.93 × 1.35 = 1.25 tons before waste. With a 10% waste allowance, that becomes 1.02 cu yd and 1.38 tons.

Crushed Stone Types and Weight

One cubic yard of crushed stone typically weighs 1.3-1.5 tons (about 2,600-3,000 lb), depending on stone type and moisture. Always confirm the density with your supplier, as grading and moisture can change the weight.

Stone typeTypical useWeight per cubic yard (tons)
#57 Crushed Stone (3/4 in)Driveways, drainage, landscaping and general aggregate1.35
Crusher Run / #21A (base stone)Compacted base for driveways, paths and patios1.45
#3 Crushed Stone (1-2 in, drainage/rail ballast size)Drainage, rail ballast and larger aggregate layers1.30
Crushed LimestoneDriveways, bases, paths and landscaping1.35
Crushed Concrete (recycled)Recycled base, driveways and fill1.30
Drain Rock (#67 / clean drainage stone)French drains, drainage trenches and clean drainage layers1.30
Pea GravelPaths, patios, play areas and decorative landscaping1.40

Coverage: How Far Does One Ton Go?

For typical crushed stone at 1.35 tons per cubic yard, 1 ton = 0.74 cu yd = 20 cu ft. That ton covers about 120 sq ft at 2 in deep, 80 sq ft at 3 in deep, and 60 sq ft at 4 in deep (20 cu ft ÷ depth in feet: 20 ÷ 0.167 = 120, 20 ÷ 0.25 = 80, and 20 ÷ 0.333 = 60). As a larger example, 1,000 sq ft at 3 in deep needs about 9.26 cu yd (1,000 × 0.25 ÷ 27), which is about 12.5 tons at 1.35 tons per cubic yard.

Crushed Stone Calculator FAQs

How much does a cubic yard of crushed stone weigh?

About 1.3-1.5 tons (2,600-3,000 lb), depending on stone type and moisture. #57 crushed stone is around 1.35 tons per cubic yard.

How many tons of crushed stone do I need for 1,000 sq ft?

At 3 in deep, about 12.5 tons. The calculation is 1,000 sq ft × 0.25 ft = 250 cu ft, 250 ÷ 27 = 9.26 cu yd, and 9.26 × 1.35 = 12.5 tons.

What is the difference between crushed stone and crushed rock?

They are the same material family. Both are mechanically crushed, angular stone, and suppliers use the names interchangeably. Crushed stone differs from round gravel and pea gravel, which are naturally rounded rather than crushed and angular.

Can I use this as a limestone calculator or crushed concrete calculator?

Yes. Choose Crushed Limestone or Crushed Concrete in the stone type list, and the calculator will use that material’s weight per cubic yard.

How much crushed stone for a driveway?

A typical driveway uses a 4-6 in base of crusher run plus a top layer, with the exact depth depending on soil, traffic and local practice. For a general driveway estimate, also try the Gravel Calculator.

Related Calculators

Stone Calculator: Coverage per Ton

Use the table below to see how far one ton of crushed stone goes. Coverage per ton is worked out as 324 divided by (depth in inches times density in tons per cubic yard), using the densities from the stone list above. For example, #57 stone at 1.35 tons per cubic yard covers 324 divided by (3 times 1.35), which is 80 sq ft per ton at 3 inches deep.

Stone typeDensity (tons per cubic yard)2 in deep3 in deep4 in deep
#57 Crushed Stone1.35120 sq ft80 sq ft60 sq ft
Crusher Run / #21A1.45112 sq ft74 sq ft56 sq ft
#3 Crushed Stone1.30125 sq ft83 sq ft62 sq ft
Crushed Limestone1.35120 sq ft80 sq ft60 sq ft
Crushed Concrete (recycled)1.30125 sq ft83 sq ft62 sq ft
Drain Rock (#67)1.30125 sq ft83 sq ft62 sq ft
Pea Gravel1.40116 sq ft77 sq ft58 sq ft

Use it as a crusher run calculator too — crusher run (#21A) is in the material list above.

How much does a ton of crushed stone cover?

It depends on the stone and the depth. One ton of #57 crushed stone covers about 120 sq ft at 2 inches deep, 80 sq ft at 3 inches deep, and 60 sq ft at 4 inches deep. Crusher run (#21A) covers about 112 sq ft at 2 inches, 74 sq ft at 3 inches, and 56 sq ft at 4 inches, while #3 stone covers about 125, 83, and 62 sq ft at those same depths. Check the table above for the stone you plan to order.

Related calculators and guides

For weight conversions, see how many cubic yards are in a ton of rock, compare landscaping material prices by state, and plan drainage with the French drain calculator.

Building a driveway? The stone is only half the decision — a driveway is built in layers. Our guide to the best gravel for a driveway shows which stone goes in the base, middle and top layers, how deep each layer should be for your soil and traffic, and what the stone costs per ton.

Buying crushed stone by the ton?

Crushed stone is usually priced by the ton, but driveways, bases and drainage layers are planned in cubic yards — and every stone type converts differently, from about 1.30 tons per cubic yard for drain rock up to 1.45 for crusher run. If you have a weight quote and need the volume it covers (or the reverse), the gravel tons to yards calculator converts both ways using the density of the stone you pick here.

Ready to calculate?

Start with your measurements and get a material estimate in seconds.

Explore all calculators